Manual Adler AD 1340 Fierbător

Ai nevoie de un manual pentru Adler AD 1340 Fierbător? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 5 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

9. Keep warm function button / indicator
BEFORE FIRST USE
26. Do not use aggressive detergents to wash the kettle housing - they can damage the
kettle or remove the markings.
27. The device is not designed to work with external schedulers or separate remote
control system.
28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
25. Descale your kettle regularly. Using kettle with heating element covered by scale may
cause damage.
29. Children aged 3 to 8 years old can enable and disable the device only when it is in its
normal position of use, they are supervised or instructed on the safe use and understand
the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean
or maintain.
DESCRIPTION OF THE DEVICE. ELECTRIC KETTLE AD1340
1. Lid 2. LCD display 3. Housing
4. Handle 5. Base 6. Mesh filter
24. Never use kettle without filter or with open cover (automatic shutdown will not work).
7. Power button ON/OFF 8. Temperature control buttons (+ / -)
BASIC OPERATION:
SINGLE WATER BOILING UP TO 100
Fill the kettle three times with water to the maximum level, boil and pour it. To remove any factory odor.
2. Place the base (5) on a stable, flat and heat-resistant surface.
4. Insert the power plug into the 220-240V ~ 50 / 60Hz power socket. Place the kettle on the base (5), you hear the "di" sound.
6. After the water boils, the kettle will automatically turn off, you will hear the "di-di" sound.
7. To turn off the kettle before the water finish boiling, lift it off the base (5) or press the power button (7)
8. You can start the kettle again after approximately 2 minutes from the last use.
9. When the device is not in use, the display (2) turn off lighting after 5 minutes.
ADVANCED OPERATION:
3. Remember to close the kettle with the lid (1) after filling, otherwise the kettle will not switch off automatically when the water boils.
1. Fill the kettle with water so that the water level is between the maximum and minimum levels on the water level indicator.
5. Press the power button (7), the display (2) will blink twice, indicating 100 , then the heater will start heating the water, and the LCD
display (2) will show the current water temperature. The water temperature will rise until it boils, i.e. up to 100°C.
lid. Do not open the lid during boiling in kettle or immediately after boiling, because steam
coming out of lid can cause burns.
21. Move the kettle only by holding it by handle..
22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.
23. Never switch on kettle without water.
Put the kettle on the base (5), wait until you hear the “di" sound. Press the temperature control buttons (8), the display (2) will show the
temperature you choose 40 (or 50 / 60 / 70 / 80 / 90 ) after that press the power button(7) to confirm the
temperature, the LCD display blinks three times remembering the setting of the selected temperature level. Then the display will show
the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the selected temperature level of 40
(or 50 / 60 / 70 / 80 / 90 ), , you will hear the "di-di" sound.
PROTECTION DEVICES
CLEANING AND MAINTENANCE
Put the kettle on the base (5), wait until you hear the "di" sound. Press the keep warm function button (9) until the icon (KW) light on
the display (2). Press the temperature control buttons (8) until the display (2) will show the temperature you choose 40 (or 50 /
60 / 70 / 80 / 90 ) and blink three times remembering the setting of the selected temperature level, then press the power
button (7). The display will show the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the
selected temperature level of 40 (or 50 / 60 / 70 / 80 / 90 ), you will hear a single "di" sound. Within 2 hours, the
kettle will heat the water cyclically, constantly displaying the selected temperature level to maintain. When the water temperature drops
by 5 in relation to the selected temperature level of 40 (or 50 / 60 / 70 / 80 / 90 ), the device will turn on
automatically and heat it.
Note: Only during this procedure, the keep warm function will be active. After removing the kettle from the base, the keep warm
function settings will be reset.
The device is equipped with an automatic fuse against overheating, the fuse will trip when the kettle was used with insufficient water.
Always make sure that the volume of water in the appliance is above the minimum level. If the fuse turns on, turn off the kettle by
pressing the power button (7), then remove the plug from the power socket and allow the kettle to cool for 5-10 minutes. Then fill the
kettle with water and turn on the device that will operate normally.
SINGLE WATER BOILING TO THE SELECTED TEMPERATURE 40 OR 50 / 60 / 70 / 80 / 90
KEEP WARM FUNCTION AT THE SELECTED TEMPERATURE 40 OR 50 / 60 / 70 / 80 / 90 /
4
Descărcaţi manualul în limba română (PDF, 3.28 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Adler AD 1340 Fierbător, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Adler AD 1340 Fierbător?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Adler AD 1340 Fierbător. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Adler AD 1340 Fierbător. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Adler. S-ar putea să ofere un manual original. Căutați manualul dvs. Adler AD 1340 Fierbător într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Adler
Model AD 1340
Categorie Fierbătoare
Tip fișier PDF
Mărime fișier 3.28 MB

Toate manualele pentru Adler Fierbătoare
Mai multe manuale pentru Fierbătoare

Întrebări frecvente despre Adler AD 1340 Fierbător

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Pentru ce este sită în ceainicul meu? Verificat

Aceasta este pentru a prinde orice calcar liber care s-ar fi putut acumula în timp.

A fost util (492) Citeşte mai mult

Ceainicul nu se termină și continuă să fiarbă, ce ar trebui să fac? Verificat

În multe cazuri, capacul fierbătorului nu a fost închis corect. Dacă se lasă să scape căldură, fierbătorul va fierbe în continuare. Dacă acest lucru nu rezolvă problema, trebuie să contactați producătorul sau un mecanic.

A fost util (327) Citeşte mai mult

Pot fierbe mai puțin decât cantitatea minimă de apă? Verificat

Nu. Când fierbe mai puțin decât cantitatea minimă de apă, este posibil ca senzorul de temperatură să nu funcționeze corect. Acest lucru ar putea împiedica fierbătorul să se oprească la punctul de fierbere, rezultând situații posibil periculoase.

A fost util (150) Citeşte mai mult

Este eficient să umpleți un ceainic cu apă fierbinte de la robinet? Verificat

Nu. Pentru a aduce apă caldă la robinet, este adesea necesar să lăsați mai întâi apa rece, care va fi irosită. De asemenea, conductele vor umple aceeași cantitate de apă fierbinte care nu va fi folosită și se va răci, ceea ce duce la pierderi de energie. Prin urmare, este mai bine să umpleți un ceainic cu apă rece.

A fost util (98) Citeşte mai mult

Pot fierbe mai mult decât cantitatea maximă de apă? Verificat

Nu. Când fierbeți mai mult decât cantitatea maximă de apă, fierbătorul s-ar putea revărsa. Acest lucru ar putea duce la situații posibil periculoase.

A fost util (96) Citeşte mai mult
Manual Adler AD 1340 Fierbător

Produse asemanatoare

Categorii relevante

×
Download