Manual Alecto ADB-19 Soneria

Manual

ADB-19 Installation

Outdoor-unit:

Indoor-unit:

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Connecting:

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1

Accessories List:

● 1 x Receiver ● 1 x Transmitter

● 1 x User Manual ● 1 x Double-sided adhesive

● 1 x 3 volts CR2032 battery for transmitter

Technical Specification:

● Frequency: 433.92MHz+100KHz

● Modulation Type: ASK

● Ring Volume:＞85dB(within 0.5m)

● Channel space: 1 million sets of auto-learning codes

● Receiver bandwidth: ±90KHz

● Reception Sensitivity:＞-105dBm

● Transmitter Power:＜10mW

● Power consumption(Receiver): standby:＜0.3W

● Power consumption(Transmitter): standby:＜5uA working:＜10mA

● Power Supply(Receiver): AC110-240V

● Power Supply(Transmitter): DC 3V (1x CR2032)

● Operating Range:＞150m (in the open air)

Names for Parts:

Instruction Manual

Auto-leaning Code Wireless Door Chime

Model No.: QH-861AK

VOL

MODE

CODE

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1x1x

1x

<10 sec.

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1

Accessories List:

● 1 x Receiver ● 1 x Transmitter

● 1 x User Manual ● 1 x Double-sided adhesive

● 1 x 3 volts CR2032 battery for transmitter

Technical Specification:

● Frequency: 433.92MHz+100KHz

● Modulation Type: ASK

● Ring Volume:＞85dB(within 0.5m)

● Channel space: 1 million sets of auto-learning codes

● Receiver bandwidth: ±90KHz

● Reception Sensitivity:＞-105dBm

● Transmitter Power:＜10mW

● Power consumption(Receiver): standby:＜0.3W

● Power consumption(Transmitter): standby:＜5uA working:＜10mA

● Power Supply(Receiver): AC110-240V

● Power Supply(Transmitter): DC 3V (1x CR2032)

● Operating Range:＞150m (in the open air)

Names for Parts:

Instruction Manual

Auto-leaning Code Wireless Door Chime

Model No.: QH-861AK

VOL

MODE

CODE

1x

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Alecto ADB-19 Soneria. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Alecto. S-ar putea să ofere un manual original. Căutați manualul dvs. Alecto ADB-19 Soneria într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Alecto Sonerie
Mai multe manuale pentru Sonerie