4 5
Accessories
and safety precautions
Accessories (depending on the model)
1 Max In telescopic tube/telescopic tube with
power cable
2 Max In hose handle
3 Max In hose handle with remote control
4 Max In nozzle
5 Max In motorised oor nozzle
6 Max In turbo nozzle
7 Nozzle with pedal, telescopic tube and hose
8 Crevice nozzle
9 Upholstery nozzle
10 Dusting brush
Safety precautions
Electrolux Twinclean should only be used by
adults and only for normal indoor vacuuming
in a home environment. The vacuum cleaner
features double insulation and does not need to
be earthed.
Young children should be supervised to ensure
that they do not play with the appliance.
Close attention is necessary when used near
children. The appliance is not intended for use
by young children and inrm persons without
supervisison.
If the plug or cable are damaged, the plug and
cable assembly must be replaced by returning
the product the your local Electrolux Service
Agent or similarly qualied person in order to
avoid a hazard.
Never vacuum:
• In wet areas.
• Close to ammable gases, etc.
Never vacuum:
• Sharp objects.
• Fluids (this can cause serious damage to the
vacuum cleaner).
• Hot or cold ashes, lit cigarettes, etc.
• Fine dust, e.g. plaster, concrete, our.
The above can cause serious damage to the
motor – damage which is not covered by the
warranty.
Power cord precautions:
• A damaged cord should only be replaced by an
authorised Electrolux service centre. Damage
to the vacuum cleaner’s cord is not covered by
the warranty.
• Never pull or lift the vacuum cleaner by the
cord.
• Disconnect the plug from the wall outlet
before cleaning the outside of the vacuum
cleaner.
• Regularly check that the plug and cord are not
damaged. Never use the vacuum cleaner if the
cord is damaged.
All service and repairs must be performed by an
authorised Electrolux service centre. Store the
vacuum cleaner in a dry space.
Before starting
11 Insert the hose so that the catches click to
engage (press the catches to release the
hose).
12 Attach the telescopic tube to the hose
handle and the oor nozzle (certain models
have a lock button that must be pressed
before the hose and telescopic tube can be
pulled apart). If you have a vacuum cleaner
with remote control, make sure that the
connector is pressed in completely.
13 Electrolux Twinclean features an automatic
cord winder (autoreverse). Pull out the
power cord and plug into a socket. Pull
lightly on the cord to release the catch.
14 Start/stop the vacuum cleaner by pushing
the button at the top of the unit.
15 If you have a vacuum cleaner with remote
control, the vacuum cleaner is started by
lightly pressing the Max or Min button. Turn
o the vacuum cleaner by pushing O.
16 Adjust the suction power by pressing the
Max-Min button on the vacuum cleaner or
by pressing either the Max or Min button
on the remote control. The light for suction
power turns dark blue at max suction
power and light blue at min suction power.
Getting the best results
Hard oors and carpets: The Max In, Max In
Turbo and Max In motorised oor nozzles (5)
detect the type of surface being vacuumed. The
nozzle with the pedal is set to the type of surface
to be vacuumed: Position 1 for carpets (17) and
position 2 for hard oors (18).
Crevices, corners, etc.: Use the crevice nozzle
(8).
Upholstered furniture: Use the upholstery
nozzle (9).
Curtains, lightweight fabrics, etc.: Use the
upholstery nozzle (9).
The suction power can be reduced by pressing
the Max-Min button on the vacuum cleaner or
the Min button on the remote control.
Frames, bookshelves, etc.: Use the dusting
brush (10).
Using Max In nozzles
Max In, Max In Turbo and Max In motorised
oor nozzles, are ideal for both hard oors and
carpets. The Max In motorized nozzle receives
power via the tube and hose, and no additional
electrical connections are needed. A blue light
on the nozzle indicates that the brush roller is
turning. If anything should become lodged in the
brush roller, the light turns o.
Note: Do not use the Max In Turbo or Max In
motorised nozzles on fur rugs, rugs with long
fringes or pile depths exceeding 15 mm. To avoid
damaging the carpet, do not let the nozzle stay
in one place when the brush is rotating. Do not
pass the nozzle over electrical cords, and be sure
to switch o the vacuum cleaner immediately
after use.
Parking position
19 When you pause during cleaning, the tube
can be attached to the rear of the vacuum
cleaner.
20 When storing, the vacuum cleaner can be
placed on end and the tube attached at the
bottom of the vacuum cleaner.
How to use the telescopic tube
21 Extend or shorten the telescopic tube by
pushing the release button towards the
nozzle and simultaneously adjusting the
length of the telescopic tube. There is a
catch at both ends of the telescopic tube.
Certain models only have one release
button.
Emptying the dust container
Electrolux Twinclean’s dust container must be
emptied when it is full to the Max sign. The dust
container must never be overlled.
22 Press the release button at the rear of
vacuum cleaner.
23 Lift the dust container out.
24 Empty it over a wastepaper basket by
pressing the release button. Put the dust
container back and press the rear part of
the container until it clicks into place.
Cleaning the dust lter
Electrolux Twinclean has a dust lter that should
be cleaned now and then to secure a constant
high suction. When it is time to clean the lter,
the lter light on the vacuum cleaner will ash.
The lter is cleaned while in the vacuum cleaner.
25 Turn o the vacuum cleaner when the lter
light ashes.
26 Open the cover by lifting the release catch.
27 Lift up the lter holder and turn it a half
turn so that the lters change places with
each other and put the lters back into the
vacuum cleaner.
28 Turn the left lter a full turn in the direction
of the arrow. The lter light begins to ash
and the vacuum cleaner starts, and as you
turn, the lter is cleaned. After you have
made a full turn, the vacuum cleaner turns
o and the lter light stops ashing. You
can now close the cover.
About once each year, when the lter light
begins to ash more frequently, the lters need
to be washed.
A Lift out the lters according to the above.
B Remove one lter at a time from the lter
container (29) by pressing the marked
release button and turning the lter.
C Rinse the lters in lukewarm water and let
them dry.
D Thread the lters back into the lter holder.
Cleaning the exhaust lter
There are two types of Electrolux Twinclean
exhaust lters:
• Standard lter. Must be cleaned every 5–7
years.
• HEPA lter (thicker with creased bre material).
Must be cleaned every 2–3 years.
There is no dierence in how the lters are
cleaned or tted.
30 Remove the dust container by pressing the
release button at the back of the vacuum
cleaner and lifting the container.
31 Lift the two snap catches at the back edge
of the vacuum cleaner and open the lter
cover.
32 Lift out the lter.
English
33 Rinse the inside (dirty side) in lukewarm
tap water. Tap the lter frame to remove
the water. Repeat the process four times.
Note: Do not use cleaning agents and avoid
touching the lter surface.
Let the lter dry.
Put the lter back into place, close the lter
cover and ret the dust container.
Clearing the hose and nozzle
The vacuum cleaner automatically stops if there
is a blockage in the nozzle, tubes or hose or if the
lter or lter holder becomes blocked. Pull out
the power plug and allow the vacuum cleaner
to cool down for 20–30 minutes. Remove the
blockage that is causing the problem, and/or
replace the dirty lter. Restart the vacuum
cleaner.
34 Use a suitable implement to clear the tubes
and hose of blockages.
35 It is sometimes possible to clear the hose by
“massaging” it. However, be careful in case
the obstruction has been caused by glass
or needles caught inside the hose. Note:
The warranty does not cover any damage to
hoses caused by cleaning them.
If something gets stuck
in the vacuum cleaner
If something gets stuck in the vacuum cleaner:
36 Turn o the vacuum cleaner and open the
cover at the front of the unit by lifting the
release catch.
37 Lift out the lter holder and the lters.
38 Lift the cover between the lter wells and
remove anything that may have got stuck.
Also check the bottoms of the lter wells for
foreign objects.
39 Ret the cover under the catches and close
it by pressing down. Put the lter holder
back in place and close the vacuum cleaner
cover.
Cleaning the Max In
and carpet/oor nozzles
40 The Max In and the carpet/oor nozzles
should be cleaned frequently to avoid
losing suction power. The easiest way to do
this is by using the hose handle.
41 Remove the wheels and axles by pulling
them straight out. Remove dust-balls, hair
or anything else that may have got stuck.
42 Use the crevice nozzle to clean the wheel
axles. Ret the wheels by pressing them
into place. The auxiliary wheels should
be carefully pulled straight out. Clean as
required and put them back in the reverse
order.
Cleaning the Max In Turbo
and motorized nozzles
Always unplug the vacuum cleaner from the wall
outlet before cleaning.
43 To remove the brush roller cover, push the
outer latch out, and the middle cover to the
left, and this will also free the wheels for
cleaning.
44 Lift out the brush roller and clean it.
Remove entangled threads etc. by snipping
them away with scissors. Ret in the
reverse order. The auxiliary wheels should
be carefully pulled straight out. Clean as
required and ret in the reverse order (45).
Cleaning the dust container
The dust container can be thoroughly cleaned
when emptying.
46 Remove the dust container.
47 Empty it.
48 Remove the cover on the side of the round
space by pulling it straight out.
The dust container can now be wiped o or
cleaned. If you use water, make sure that the
cartridge is dry before you put it back. Ret the
cover back on by pushing it straight in. Put back
the dust container.
Troubleshooting
The vacuum cleaner does not start
• Check that the cable is connected to the mains.
• Check that the plug and cable are not
damaged.
• Check for a blown fuse.
The vacuum cleaner stops
• Check if Twinclean is full. If so, empty it and
clean both the box and the lter before putting
it back in the cleaner.
• Is the nozzle, tube or hose blocked?
• Are the lters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an
authorised Electrolux service centre. Damage to
the motor caused by the penetration of water is
not covered by the warranty.
Consumer information
Electrolux decline all responsibility for all
damages arising from any improper use of the
appliance or in cases of tampering with the
appliance.
This product is designed with the environment
in mind. All plastic parts are marked for recycling
purposes. For details see our web site: www.
electrolux.com
If you have any comments on the cleaner or the
Instructions for Use booklet please e-mail us at:
If you can´t nd accessories to your Electrolux
vacuum cleaner, please visit our website at www.
electrolux.co.uk or call 08706 055 055.
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city oce, your
household waste disposal service or the shop where
you purchased the product.
Alăturați-vă conversației despre acest produs
Aici puteți împărtăși ce părere aveți despre Electrolux Z8230 TwinClean Aspirator. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.