Manual EMOS E5060 Stație meteo

Manual

4

Upper Side

SNOOZE/LIGHT – Activate the display backlighting and the snooze function.

Wireless Sensor

Front Side

A – LED diode of signal transmission from the sensor

B – outdoor temperature and humidity

Rear Side

C – an opening for hanging on the wall

CH – changing the sensor channel number (1, 2, 3)

°C/°F – temperature units

Putting into Operation

1. Insert the batteries into the weather station (2× AA) and then into the remote sensor (2× AAA). When inserting

the batteries observe the right polarity of the batteries to avoid the weather station or sensor damage. Use the

alkaline batteries of the same kind only, do not use the rechargeable batteries.

2. Place the both units next to each other. Use buttons + - on the station to set your altitude, weather icon according

to the current situation and to select the pressure units. You can navigate among values by pushing the HISTORY

button. If you do not push any button for 20 seconds after inserting the battery, this setting will be skipped. The

weather station captures the signal from the sensor within 3 minutes. In case the signal from the sensor has not

been found, hold the CHANNEL button on the weather station to repeat the operation.

3. If the outdoor temperature information disappears from the display, follow step 1 and 2 again.

4. We recommend placing the sensor on the northern side of the house. In the built-up areas the transmission

distance may rapidly decrease.

5. The sensor is resistant to dripping water, however do not dispose it to persistent rain.

6. Do not place the sensor on metal platforms, as this may shorten the signal range.

7. In case the low battery icon appears (D eld), change the batteries in the sensor or in the weather station.

Changing the Channel and Attaching Additional Sensors

1. By pressing the CHANNEL button on the rear of the weather station choose the required sensor‘s channel - 1, 2

or 3. Then hold the CHANNEL button, the icon starts ashing.

2. Remove the battery cover on the rear side of the sensor and insert the batteries (2×AAA).

3. Set the required channel No. of the sensor - 1, 2, 3, by pressing the CH button, it will be displayed on the front

display. The information from the sensor will be retrieved within 3 minutes.

4. In case the signal from the sensor has not been found, remove the batteries from the weather station and insert

them back.

Radio Controlled Clock (DCF77)

After registration of the remote sensor, the weather station automatically starts capturing the DCF77 signal. This lasts

for 7 minutes and during that time the L icon is ashing. During capturing the signal no information on the display

will be updated and the button will not be working (except the SNOOZE/LIGHT button).

Signal captured - the icon will stop ashing and the current time will be displayed.

The signal has not been found - the icon disappears.

To initiate the DCF77 signal capturing process again, push the + and – buttons.

To cancel the DCF77 signal capturing process, push the + and – buttons again.

DCF77 signal will be synchronized daily from 2.00 a.m. till 3.00 a.m.

To capture the signal under the normal circumstances (in a safe distance from the sources of interference such as TV

sets, PC screens) it lasts several minutes. In case the station does not capture this signal, proceed the following steps:

1. Relocate the weather station into another place and repeat the DCF signal capture steps.

2. Check the distance of the clock from the sources of interference such as PC screens TV sets. The distance should

be kept at least from 1.5 to 2 meters.

3. When capturing the DCF signal, do not put the weather station close to any metal doors, window frames or any

other metal constructions, objects (washing machines, laundry dryers, refrigerators, etc.).

4. Inside iron-reinforced concrete construction premises (basements, high building, etc.) depending on the condi-

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru EMOS E5060 Stație meteo. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați EMOS. S-ar putea să ofere un manual original. Căutați manualul dvs. EMOS E5060 Stație meteo într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru EMOS Stații meteo
Mai multe manuale pentru Stații meteo

Întrebări frecvente despre EMOS E5060 Stație meteo

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

EMOS E8825 Stație meteo

Manual

EMOS E5201 Stație meteo

Manual

EMOS E5059 Stație meteo

Manual

EMOS E3003 Stație meteo

Manual

EMOS E8236 Stație meteo

Manual

EMOS E5068 Stație meteo

Manual

EMOS E6018 Stație meteo

Manual

EMOS E0352 Stație meteo

Categorii relevante