Manual First Austria FA-5676-2 Aparat de tuns

Manual

4 5

REPLACEMENT/CLEANING OF

ACCESSORIES

Replacement of detachable combs (Fig. D)

1. Turn off the trimmer.

2. Remove the comb as shown above

3. fit another detachable combs to the blade.

4. Press the blade as shown until you hear

a sound, and check that accessories are

correctly xed.

Cleaning the blades

1. Remove the detachable comb.

2. Remove the blade as shown below. (Fig. E)

3. Clean the blade and then ret until you

hear a sound, which shows it has been

re-tted.

• It is advised to clean the trimmer after

each use.

• Remove hairs from the razor blades and

from holes in the appliance through the

cleaning brush.

• Apply 1-2 drops of the lubrication oil on the

cutter system (fig. B).

• The house of the appliance can be

cleaned with a damp cloth. Be sure no

water

• Is leaking into the appliance. Don’t ever

immerse the appliance into fluids (fig. C).

• The Guide comb can be cleaned by

rinsing them with warm water.

• Dry all parts before placing them back on

the appliance.

TRIMMING

1. Be certain the clipper is clean. If the cutter

blades are running slowly or do not move,

they may be dirty and clogged. Clean

the clipper following MAINTENANCE

instructions.

2. Seat person having hair trimmed in a

position where the top of the head is at

your eye level.

3. The hair should be clean, well combed,

tangle-free and dry.

4. Use the clipper with the Guide Comb.

5. Set the desired cutting length by turning

the bottom adjustment wheel.

6. Hold the clipper firmly but in a comfortable

grip.

• If you are not used to clipping hair, begin

with a higher setting and then reduce the

setting to avoid cutting more hair than

desired.

7. Start at the sides of the head. Move the

clipper up slowly against direction of hair,

lifting it up and outward through hair,

cutting a small amount at a time.

8. In between, shake or blow off the hair from

the clipper. If too much hair is caught in the

Guide Comb, remove and clean it.

9. Regularly comb the hair in the style

desired during trimming.

Trimming without the Guide Comb

When using the clipper without the Guide

Comb, use a slow, smooth motion to prevent

trimming off more hair than desired.

Trimming with the Barber’s Comb

To cut longer hair, hold it up with the barber’s

comb and cut it with the scissors or with

clipper (the Guide Comb must be removed

from the clipper).

Trimming with the Thinning Guide

The Thinning Guide is a device that allows

you to thin a chosen part of the hair rather

than trim it all at the same length. By changing

the position (fig. F) you cut hair with the

Thinning Guide. Some of the hair gets

between the teeth of the clipper and is cut,

but most of the hair falls in the gaps between

the teeth and is not cut.

STORAGE

• Save the appliance in a dry dust free

space when not using it for longer time.

FAULT REMEDY

Power becomes

weak after a brief

period

Recharge the trimmer

with the adaptor

The trimmer traps

hair

Clean and oil the shaving

head or replace with a

new one

DISPOSAL

Protect the environment

These hair clippers contain two permanently

in-built Ni-MH rechargeable batteries.

Do not dispose of the batteries or the device

with normal household refuse, contact your

local council to find out about environmentally

friendly and proper disposal of the device(as

electrical scrap) observe the applicable local

and national disposal regulations with regard

to separation of materials, waste collection

and recycling centre.

The packaging is wholly composed of

environmentally friendly materials that can be

disposed of at a local recycling centre

The following parts should be disposed of

separately

1. Motor, metal parts, circuit board

2. Mains adapter

3. Plastic parts

4. Rechargeable batteries

Recycling

This product bears the selective sorting

symbol for waste electrical and electronic

equipment (WEEE).

This means that this product must be handled

pursuant to European Directive 2002/96/

EC in order to be recycled or dismantled to

minimize its impact on the environment.

For further information, please contact your

local or regional authorities.

Electronic products not included in the

selective sorting process are potentially

dangerous for the environment and human

heath due to the presence of hazardous

substances.

Service centre

If the product doesn‘t function properly,

please contact your dealer or an authorised

service centre.

SPECIFICATION:

Power: 220-240V • 50/60Hz • 2.5W

ENGLISH

ENGLISH

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru First Austria FA-5676-2 Aparat de tuns. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați First Austria. S-ar putea să ofere un manual original. Căutați manualul dvs. First Austria FA-5676-2 Aparat de tuns într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru First Austria Aparate de tuns
Mai multe manuale pentru Aparate de tuns

Întrebări frecvente despre First Austria FA-5676-2 Aparat de tuns

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

First Austria FA-5676-1 Aparat de tuns

Manual

Philips QG3380 Aparat de tuns

Manual

Grundig MGK 6841 Aparat de tuns

Manual

Teesa TSA0523 Aparat de tuns

Manual

Wahl 1592 Q Aparat de tuns

Manual

Sencor SHP 320SL Aparat de tuns

Manual

Panasonic ER-2171 Aparat de tuns

Manual

Rowenta TN2809F0 Stylis Aparat de tuns

Categorii relevante