Manual Güde SG 120 A Aparat de sudura

Manual

Notice: The operation is permissible only with

stray current protection switch!

CAUTION!

• Keep your worksite clean and tidy. The

untidy workplaces invite the hazard of

accidents and injuries.

• Be mindful of conditions of the

environment, which you are working in.

Do not use the electrical and work tools in

the wet and dump environment. See to the

sufficient lighting. Do not expose the

electrical tools to rain or increased dampness

Do not put the electrical tools on in the area

of easily inflammable liquids or gases.

• Do not let any stranger approach the unit.

Visitor and viewers, children in the foist place

and the sick and infirm should stay at a safe

distance from the worksite.

• Take care of the safe storage of the tools

The tools out of use should be stored in a dry

elevated place, not easily approachable.

• Use an appropriate tool for every work .

Do not use small-sized tool for works, the

completion of which requires heavy tools.

Use the tools Use the tools for the purposes

which they were manufactured for. Make

sure that the tools are always clean and

sharp.

• Mind suitable clothing. Do not wear loose

fitting clothes and jewels. They could be

caught by movable parts of the unit. To work

outdoors, it is recommended to wear working

gloves and antiskid shoes. Long hair should

be protected as appropriate.

• Use personal protection equipment.

Protection glasses and hearing protectors

should be always worn. Respirator or a

protection face mask are also indispensable

Tight fitting gloves must be worn when

handing sharp edges or saw blades

• Take care of the electrical cable Do not

pull the cable. When unplugging, only the

socket should be touched, The cable must be

at a safe distance from water resources, oil

and sharp edges.

• Secure the piece to be processed. Use

appropriate clamps, vices etc. It is safer than

to hold the piece by hand. In addition, you

will have both the hands free to work.

• Always take care for your posture tlo be

firmly balanced. Never lean forward or

sideward if you want to reach something.

• Remove the socket wrench etc. Before

switching the unit on, all the wrenches and

other tools to replace parts must be removed.

• Prevent unintentional switching on. Before

plugging in, check the unit to see that it is

switched off.

• When working outdoors, always use

special extension cables. These cables are

suitable for the purpose and they are marked

in a corresponding way.

• Be concentrated all the time. Mind what

you are doing. Use common sense Never

work with an electrical tool when you are

tired.

• Watch out for damaged parts. Check the

unit through before use. Are any parts

damaged? If the damage is slight only,

consider if the operation of the unit will still be

safe and perfect. Mind the correct adjustment

and setting of moving parts. Do some

elements fail to fit correctly in the others? Are

some of them damaged? Is everything

installed properly? Are any other conditions

of the unit perfect functioning met? Any

damaged protective devices etc. have to be

repaired or replaced by authorised

serviceman, unless otherwise stated in the

operating manual

• Use only approved parts. Use only genuine

spare parts for maintenance and repairs. The

spare parts should be bought in an approved

servicing centre.

• Warning! Use of accessories and assembled

parts not expressly recommended in this

manual may lead to the risk of persons and

property.

Initial Operation Safety

Instructions

Use of welding machines and the process of

welding may endanger the welder’s and other

persons´ health .Please, read the injuries

prevention regulations below carefully and

respect them. Remember that the considerate

use of the welding machine and observation of

regulations are the best provisions against any

injury.

1) Wear a suitable protection suit without any

pockets and trousers without turn-ups. Avoid

synthetic materials.

2) Always wear insulation gloves.

3) Wear close working boots.

4) Always use the protection welder’s shield

and use goggles of transparent glass and

side protection.

5) See to sufficient ventilation of the work area

If it is not possible the small rooms need

installation of ventilation equipment.

6) Clean the parts to be welded, remove the

rust, fat and varnish to provide for absorbing

smokiness.

11

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Güde SG 120 A Aparat de sudura. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Gude. S-ar putea să ofere un manual original. Căutați manualul dvs. Güde SG 120 A Aparat de sudura într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Güde Aparate de sudura
Mai multe manuale pentru Aparate de sudura

Întrebări frecvente despre Güde SG 120 A Aparat de sudura

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Parkside IAN 281479 Aparat de sudura

Manual

Parkside IAN 310867 Aparat de sudura

Manual

Telwin 954194 Force 168 Aparat de sudura

Manual

Parkside IAN 409152 Aparat de sudura

Manual

Telwin 954422 Force 170 Aparat de sudura

Manual

Asist AEWM160B Aparat de sudura

Manual

Parkside IAN 303284 Aparat de sudura

Manual

Parkside IAN 281416 Aparat de sudura

Categorii relevante