Manual Hikoki C 5MEY Ferăstrău circular

Manual

7

English

MAINTENANCE AND INSPECTION

1. Inspecting the saw blade

Since use of as dull saw blade will degrade effi ciency

and cause possible motor malfunction, sharpen or

replace the saw blade as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws be

loose, retighten them immediately. Failure to do so could

result in serious hazard.

3. Replacing supply cord

If the replacement of the supply cord is necessary, this

has to be done by the manufacturer of this agent in order

to avoid a safety hazard.

4. Motor unit maintenance

The motor winding is an important part of this tool. Avoid

damaging and be careful to avoid contact with cleaning

oil or water.

After 50 hours of use, clean the motor by blowing into the

ventilation holes of the motor housing with dry air from an

air gun or other tool (Fig. 29).

Dust or particle accumulation in the motor can result in

damage.

5. Inspecting and maintaining the lower guard

Always make sure that the lower guard moves smoothly.

In the event of any malfunction, immediately repair the

lower guard.

For cleaning and maintenance, use an air gun or other

tool to blow clean the space between the lower guard

and gear cover as well as the rotation part of the lower

guard with dry air (Fig. 29).

Doing so is eff ective for the emission of chips or other

particles.

Accumulation of chips or other particles around the lower

guard may result in malfunction or damage.

WARNING

To prevent dust inhalation or eye irritation, wear

protective safety goggles and a dust mask when

using an air gun or other tool to clean the lower guard,

ventilation holes or other parts of the product.

Ensure smooth movement

of lower guard

Rotation part of

the lower guard

Housing vent

Space between

lower guard

and gear cover

Air gun

Fig. 29

6. Cleaning the inside of the saw cover

Regularly check and clean to make sure that sawdust

and other residue do not collect inside of the saw cover.

Always remove the saw blade when checking and

cleaning.

Washer (A)

Spindle

Saw cover

Fig. 30

7. Cleaning on the outside

When the power tool is stained, wipe with a soft dry cloth

or a cloth moistened with soapy water. Do not use chloric

solvents, gasoline or paint thinner, for they melt plastics.

8. Storage

Please avoid locations such as the following for the

storage of products and accessories that are not being

used, and store them in a safe and dry place.

NOTE

○ Do not store them in locations where children can

reach them or easily get hold of them.

○ Do not store them in locations where rain can fall

such as under the eaves of a house, or where there

is humidity.

○ Do not store them in locations where there are

sudden changes in humidity or there is direct

sunlight.

○ Do not store them in locations where there are

volatile substances which have a risk of catching fi re

or exploding.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

GUARANTEE

We guarantee HiKOKI Power Tools in accordance with

statutory/country specifi c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a HiKOKI Authorized Service Center.

0000Book̲C5MEY.indb70000Book̲C5MEY.indb7 2019/02/2716:32:282019/02/2716:32:28

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Hikoki C 5MEY Ferăstrău circular. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Hikoki. S-ar putea să ofere un manual original. Căutați manualul dvs. Hikoki C 5MEY Ferăstrău circular într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Hikoki Fierastraie circular
Mai multe manuale pentru Fierastraie circular

Întrebări frecvente despre Hikoki C 5MEY Ferăstrău circular

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Hikoki C 3606DA Ferăstrău circular

Manual

Hikoki C 3605DYA Ferăstrău circular

Manual

Hikoki C 6MEY Ferăstrău circular

Manual

Hikoki C 9U3 Ferăstrău circular

Manual

Hikoki C 18DBAL Ferăstrău circular

Manual

Hikoki C 18DBL Ferăstrău circular

Manual

Hikoki C 6SS Ferăstrău circular

Manual

Hikoki C 6U3 Ferăstrău circular

Categorii relevante