Manual Honeywell HT-216E Ventilator

Ai nevoie de un manual pentru Honeywell HT-216E Ventilator? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 2 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

4
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
1. Please read all instructions before using this fan.
2. Only use this fan as described in this manual. Other non-
recommended use may cause fire, electric shock, or injury.
3. Only connect the fan to a single-phase power socket with the
current as stated on its type plate.
4. Connect power after the fan has been fully assembled. Unplug
from outlet when moving fan from one location to another,
before putting on or taking off parts and before cleaning.
Disconnect the fan when not in use. Do not tug at the power cord
to disconnect the plug.
5. Supervision is needed when the fan is used anywhere near
children. This appliance is not intended for use by children or
other persons without assistance or supervision if their physical,
sensory or mental capabilities prevent them from using it safely.
6. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
7. Unwind the power cord completely. An incompletely unwound
power cord can lead to overheating and cause a fire. Do not touch
the power cord with wet hands. Position the power cord so that
nobody can trip over it and where the socket can be reached
easily.
8. Do not use an infinitely variable speed controller. This can lead
to overheating, fire, electric shock or faults in the appliance.
9. Do not operate the fan without the protective front and rear
grilles in position. Do not touch the rotating fan blades with any
part of the body. This can cause personal injury and damage.
10. Never insert fingers, pencils, or any other object through the
grille when fan is running.
11. Do not operate the fan if it is damaged or might be defective,
or if he is not working properly. Remove the power plug from the
socket.
12. Do not use the fan anywhere near easily inflammable gases or
substances such as solvents, lacquers, glues etc.
13. The fan is only designed for private use in indoor rooms and
is not intended for outdoor or for commercial use. Do not use the
fan anywhere near a bathtub, a shower or a swimming pool, or
anywhere else where water could splash.
14. Do not plunge the fan into water or any other liquids and do
not pour water or any other liquids over the fan.
15. Place the fan on a firm, even, dry surface. Be sure the fan is on
a stable surface when operating to avoid overturning. Make sure
the fan is standing securely so that it cannot tip over or fall down.
Maintain a safety distance of at least 50 cm from other objects.
16. Clean the fan regularly by following the cleaning instructions.
COMPONENTS
1. Front Grille
2. Blades
3. Plastic Nut
4. Rear Grille
5. Motor Shaft
6. Clutch Knob
7. Motor Housing
8. Tilt Adjusting Knob
9. Speed Knob
10. Power Supply Cord with Plug
11. Pedestal
12. Chassis
ASSEMBLY INSTRUCTIONS
Assembly of Fan Pedestal onto Chassis
1. Take the chassis and pedestal parts from the packing box and
unscrew the plastic nut on the pedestal (Fig. 1).
2. Insert the pedestal into the chassis by pushing down until it
locks into the chassis (Fig. 2).
3. Tighten the screw from the chassis to lock the pedestal (Fig. 3).
Assembly of Blade and Grilles
1. Remove the plastic nut on the motor shaft by turning it
counter-clockwise.
2. Place the rear guard on the motor shaft so that the handle is
at the top.
3. Screw on plastic nut clockwise, securing the fan guard to the
motor shaft (Fig. 4).
4. Remove and discard the small plastic sleeve on the motor shaft.
5. Loosen the retaining screw of the blade.
6. Place the fan blade on the motor shaft, making sure the fan
blade retaining screw fits into the slot of the motor shaft then
tighten the screw (Fig. 5).
7. Secure both guards firmly by tightening the screws (Fig. 6).
Descărcaţi manualul în limba română (PDF, 1.55 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Honeywell HT-216E Ventilator, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Honeywell HT-216E Ventilator?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Honeywell HT-216E Ventilator. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Honeywell HT-216E Ventilator. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Honeywell. S-ar putea să ofere un manual original. Căutați manualul dvs. Honeywell HT-216E Ventilator într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Honeywell
Model HT-216E
Categorie Ventilatoare
Tip fișier PDF
Mărime fișier 1.55 MB

Toate manualele pentru Honeywell Ventilatoare
Mai multe manuale pentru Ventilatoare

Întrebări frecvente despre Honeywell HT-216E Ventilator

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Influențează un ventilator temperatura camerei? Verificat

Nu, un ventilator mișcă doar aerul, oferind un efect de răcire a pielii.

A fost util (215) Citeşte mai mult

Care este cel mai bun loc pentru un fan? Verificat

Dacă există o sursă de aer rece, cum ar fi un aparat de aer condiționat, un ventilator poate fi utilizat pentru a distribui mai bine și în continuare acel aer rece. Dacă se folosește doar ventilatorul, cel mai bine este să-l așezați cu capul înalt. Capul este una dintre părțile corpului care transpare cel mai mult și aerul în mișcare ajută la disiparea căldurii. Acest lucru oferă efectul maxim de răcire.

A fost util (213) Citeşte mai mult
Manual Honeywell HT-216E Ventilator

Produse asemanatoare

Categorii relevante

×
Download