Manual Makita ELM3800 Mașină de tuns iarbă

Manual

10

CAUTION: The blade starts turning as soon as

the motor is started.

WARNING: Cutting elements continue to rotate

after the motor is switched off.

8-2 FOR THE BEST RESULTS WHEN

MOWING

Clear lawn of debris. Be sure that the lawn is clear of

stones, sticks, wire or other foreign objects which could be

accidentally thrown out by the mower in any direction and

cause serious personal injury to the operator and others

as well as damage to property and surrounding objects.

Do not cut wet grass. For effective mowing do not cut wet

grass because it tends to stick to the underside of the

deck preventing proper mowing of the grass clippings. Cut

no more than 1/3 the length of the grass. The

recommended cut for mowing is 1/3 the length of the

grass. Ground speed will need to be adjusted so the

clippings can be dispersed evenly into the lawn. For

especially heavy cutting in thick grass it may be

necessary to use one of the slowest speeds in order to get

a clean well mowed cut. When mowing long grass you

may have to cut the lawn in two passes, lowering the

blade another 1/3 of the length for the second cut and

perhaps cutting in a different pattern than was used the

first time. Overlapping the cut a little on each pass will

also help to clean up any stray clippings left on the lawn.

The mower should always be operated at full throttle to

get the best cut and allow it to do the most effective job of

mowing. Clean underside of deck. Be certain to clean the

underside of the cutting deck after each use to avoid a

build-up of grass, which would prevent proper mulching.

Mowing leaves. The mowing of leaves can also be

beneficial to your lawn. When mowing leaves make sure

they are dry and are not laying too thick on the lawn. Do

not wait for all the leaves to be off the trees before you

mow.

WARNING: If you strike a foreign object, stop the

motor. Pull out the mains plug, thoroughly inspect the

mower for any damage and repair the damage before

restarting and operating the mower. Extensive vibration of

the mower during operation is an indication of damage.

The unit should be promptly inspected and repaired.

9. BLADE (Fig. 7)

The blade is made of pressed steel. It will be necessary to

reshape it frequently (with a grind wheel).

Ensure that it is always balanced (an unbalanced blade

will cause dangerous vibrations). To check for balance,

insert a round rod through the central hole and support

the blade horizontally. A balance blade will remain

horizontal. If the blade is not balanced the heavy end will

rotate downwards. Reshape the heavy end until the blade

is currently balanced. To remove the blade (1), unscrew

the blade screw (2) and replace any parts, which are

damaged. When reassembling, make sure that the cutting

edges face in the direction of the motor rotation. The

blade screw (2) must be tightened to torque 20 N.m.

WARNING: For service, replace the blade

with: MAKITA 7290731 ONLY.

WARNING: Disconnect the electric cord from the

power supply.

WARNING: Protect hands by using heavy gloves

or a rag to grasp the cutting blades when replace the

blade.

10. EXTENSION CORDS

You should only use extension cords for outdoor use,

PVC ordinary duty with a cross sectional area not less

than 1.0 mm

2

(not lighter than H05VV-F 2 x 1.0 mm

2

).

Before using, check the supply and extension cords for

signs of damaged during use, disconnect the cord for

signs of damage or aging. If the cord becomes damaged

during use, disconnect the cord from the supply

immediately. DO NOT TOUCH THE CORD BEFORE

DISCONNECTING THE SUPPLY. Do not use the

appliance if the cord is damaged or worn. Keep extension

cord away from cutting elements.

WARNING: Always ensure that the ventilation

openings are kept clear of debris.

11. MAINTENANCE AND CARE

WARNING: Before performing any

maintenance or cleaning work, Always pull out the

mains plug!

Do not spray the unit with water. Ingress of water may

destroy the switch-plug combination unit and the electric

motor. Clean the unit with a cloth, hand brush, etc.

Expert inspection is required, do not make any

adjustment by yourself, must contact Makita

authorized service centre:

a) If the lawn mower strikes an object.

b) If the motor stops suddenly.

c) If the blade is bent (do not align!)

d) If the motor shaft is bent (do not align!)

e) If a short-circuit occurs when the cable is connected.

f) If the gears are damaged.

g) If the V-belt is defective.

h) Use only manufacturer’s recommended replacement

parts and accessories.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Makita ELM3800 Mașină de tuns iarbă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Makita. S-ar putea să ofere un manual original. Căutați manualul dvs. Makita ELM3800 Mașină de tuns iarbă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Makita Maşini de tuns iarbă
Mai multe manuale pentru Maşini de tuns iarbă

Întrebări frecvente despre Makita ELM3800 Mașină de tuns iarbă

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Makita PLM4620 Mașină de tuns iarbă

Manual

Makita PLM5600N2 Mașină de tuns iarbă

Manual

Makita PLM5121N2 Mașină de tuns iarbă

Manual

Makita PLM5120 Mașină de tuns iarbă

Manual

Makita PLM5114 Mașină de tuns iarbă

Manual

Makita PLM4817 Mașină de tuns iarbă

Manual

Makita PLM4101 Mașină de tuns iarbă

Manual

Makita PLM4600 Mașină de tuns iarbă

Categorii relevante