Manual Milwaukee HDE 13 RQD Maşină de găurit cu percuţie

Manual

10

GB

English

TECHNICAL DATA

Rotary Drill

HDE 13 RQD

Production code 3844 94 05...

... 000001-999999

Rated input 825 W

Output 410 W

No-load speed 0-500 min

-1

Speed under load max. 2,6 min

-1

Drilling capacity in steel 13 mm

Drilling capacity in wood 38 mm

Drilling capacity in Aluminium 20 mm

Drill chuck range 1,5 - 13 mm

Drive shank 1/2“ x 20

Weight according EPTA-Procedure 01/2014 3,2 kg

Noise information

Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:

Sound pressure level (Uncertainty K=3dB(A))

Sound power level (Uncertainty K=3dB(A))

Wear ear protectors!

86 dB (A)

97 dB (A)

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 62841

Connect only to a single-phase AC current supply and only to the mains voltage specied on the

rating plate. Must only be used from sockets with earth wire.:

Vibration emission value a

h,D

Uncertainty K=

1,0 m/s

2

1,5 m/s

2

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be

used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications, with dierent

accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running but not

actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories, keep the hands

warm, organisation of work patterns.

WARNING Read all safety warnings, instructions, illustra-

tions and specications provided with this power tool. Failure

to follow all instructions listed below may result in electric shock, re

and/or serious injury.

Save all warnings and instructions for future reference.

DRILL SAFETY WARNINGS

1) Safety instructions for all operations

a) Use the auxiliary handle(s). Loss of control can cause personal

injury.

b) Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting accessory

may contact hidden wiring or its own cord. Cutting accessory

contacting a “live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

2) Safety instructions when using long drill bits

a) Never operate at higher speed than the maximum speed

rating of the drill bit. At higher speeds, the bit is likely to bend if

allowed to rotate freely without contacting the workpiece, resulting

in personal injury.

b) Always start drilling at low speed and with the bit tip in

contact with the workpiece. At higher speeds, the bit is likely to

bend if allowed to rotate freely without contacting the workpiece,

resulting in personal injury.

c) Apply pressure only in direct line with the bit and do not

apply excessive pressure. Bits can bend causing breakage or loss of

control, resulting in personal injury.

Additional Safety and Working Instructions

Use protective equipment. Always wear safety glasses when working

with the machine. The use of protective clothing is recommended,

such as dust mask, protective gloves, sturdy non-slip footwear, helmet

and ear defenders.

The dust produced when using this tool may be harmful to health. Do

not inhale the dust. Use a dust absorption system and wear a suitable

dust protection mask. Remove deposited dust thoroughly, e.g. with a

vacuum cleaner.

Do not machine any materials that present a danger to health (e.g.

asbestos).

Keep mains lead clear from working range of the machine. Always lead

the cable away behind you.

When working in walls ceiling, or oor, take care to avoid electric

cables and gas or waterpipes.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Milwaukee HDE 13 RQD Maşină de găurit cu percuţie. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Milwaukee. S-ar putea să ofere un manual original. Căutați manualul dvs. Milwaukee HDE 13 RQD Maşină de găurit cu percuţie într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Milwaukee Maşini de găurit cu percuţie
Mai multe manuale pentru Maşini de găurit cu percuţie

Întrebări frecvente despre Milwaukee HDE 13 RQD Maşină de găurit cu percuţie

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Bosch GBM 23-2 E Maşină de găurit cu percuţie

Manual

AEG Pneumatic 2000 R Maşină de găurit cu percuţie

Manual

Bosch GBH 2-26 DE Professional Maşină de găurit cu percuţie

Manual

Rodex RDX1520 Maşină de găurit cu percuţie

Manual

Ryobi EID-500RS Maşină de găurit cu percuţie

Manual

My Project SDGJ1-13-1 Maşină de găurit cu percuţie

Manual

Ryobi PD-1970VR Maşină de găurit cu percuţie

Manual

Bosch GSB 570 Maşină de găurit cu percuţie

Categorii relevante