Manual Parkside IAN 275684 Sistem de pulverizare vopsea

Manual

4

PDFP 500 B2

GB

CY

Safety instructions for fine spray

systems

■ Keep your work area clean, well lit and free

of paint and solvents, cloths and other inflam-

mable materials. Possible risk of spontaneous

combustion. Have a fully-functioning fire extin-

guisher available at all times.

■ Ensure adequate ventilation in the spray zone

and sufficient fresh air in the entire room.

Evaporation of flammable solvents will cause

an explosive environment.

■ Do not spray or clean with materials whose

ignition point is lower than 21°C. Use mater-

ials based on water, non-volatile hydrocarbons

or similar materials. The evaporation of volatile

solvents will cause an explosive environment.

■ Do not spray near ignition sources such as

static electric sparks, open flames, ignition

flames, hot items, motors, cigarettes and

sparks caused by plugging in/unplugging

power cables or by operating switches. These

ignition sources could cause a fire to ignite in

the environment.

■ Do not spray any material if you do not know

whether it is potentially dangerous. Unknown

materials could cause dangerous conditions.

■ Wear additional personal protective equip-

ment such as suitable gloves and a protective

mask/respirator when spraying or handling

chemicals. Wearing appropriate protective

equipment for the conditions reduces your

exposure to dangerous substances.

■ Do not spray yourself, other people or animals.

Keep your hands and other body parts out

of the spray jet. If the spray jet pierces the

skin, seek medical assistance immediately. The

sprayed material can even penetrate through a

glove and into the skin and thus into your body.

■ Do not treat such a penetration injury like a

normal cut. A high-pressure jet can inject toxic

materials into the body and cause serious in-

juries. In the event of a chemical penetration of

the skin, seek medical assistance immediately.

■ Be aware of the potential hazards of the

sprayed material. Take note of the markings

on the container and the manufacturer's infor-

mation on the sprayed material, including the

instruction to use personal protective equip-

ment. The manufacturer's instructions are to

be followed to reduce the risk of fire or injuries

caused by poisons, carcinogens, etc.

■ Never spray without the nozzle head fitted.

Using a special nozzle with the appropriate

nozzle head reduces the likelihood of high-

pressure jets piercing the skin and injecting

poisons into your body.

Operation

HVLP properties

This appliance has a HVLP system (high volume,

low pressure). This ensures increased material

(paint) application and lower consumption.

IMPORTANT: Do not exceed the maximum working

pressure of 3 bar.

Connecting the device

■ The product may only be operated using

cleaned, condensate- and oil-free compressed

air and may not exceed the maximum operating

pressure of 3 bar on the appliance.

■ To ensure that you can regulate the air pressure,

the compressed air source should be equipped

with a (filter) pressure reducer.

You will need a flexible compressed air hose

with a quick-disconnect coupling and a suitable

compressed air source to operate this appliance.

Follow all the operating and safety instructions for

the compressed air source and any special instruc-

tions regarding paint preparation.

NOTE

► Take note of the correct working pressure.

Excessively high pressure leads to strong

dispersion and overly-rapid liquid evapora-

tion. The surfaces become rough and develop

poor adhesion properties. If, however, the

working pressure is too low, the paint will not

be adequately dispersed. This leads to wavy

surfaces and droplets.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Parkside IAN 275684 Sistem de pulverizare vopsea. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Parkside. S-ar putea să ofere un manual original. Căutați manualul dvs. Parkside IAN 275684 Sistem de pulverizare vopsea într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Parkside Sisteme de pulverizare vopsea
Mai multe manuale pentru Sisteme de pulverizare vopsea

Întrebări frecvente despre Parkside IAN 275684 Sistem de pulverizare vopsea

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Parkside IAN 109910 Sistem de pulverizare vopsea

Manual

Parkside PFS 100 C2 Sistem de pulverizare vopsea

Manual

Parkside IAN 273487 Sistem de pulverizare vopsea

Manual

Parkside IAN 73784 Sistem de pulverizare vopsea

Manual

Parkside IAN 87779 Sistem de pulverizare vopsea

Manual

Parkside IAN 56847 Sistem de pulverizare vopsea

Manual

Parkside IAN 418086 Sistem de pulverizare vopsea

Manual

Parkside IAN 63964 Sistem de pulverizare vopsea

Categorii relevante