Manual Parkside PHS 160 A1 Şlefuitor delta

Ai nevoie de un manual pentru Parkside PHS 160 A1 Şlefuitor delta? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 2 întrebări frecvente, 1 comentariu și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

8 GB/CY
There is an increased risk of electric shock if
your body is earthed
.
c) Keep the device away from rain or
moisture. Water entering an electrical device
increases the risk of electric shock.
d)
Do not use the mains lead for
any purpose for which it was
not intended, e.g. to carry the
device, to hang up the device or to pull
the mains plug out of the mains socket.
Keep the mains lead away from heat,
oil, sharp edges or moving parts of the
device. Damaged or tangled mains leads
increase the risk of electric shock.
e) When working outdoors with an
electrical power tool always use ex-
tension cables that are also approved
for use outdoors. The use of an extension
cable suitable for outdoor use reduces the risk
of electric shock.
f) Use a residual current device (RCD)
for protection if operating the electri-
cal power tool in a moist environment
is unavoidable. The use of an RCD reduces
the risk of electric shock.
3. Personal safety
a) Remain alert at all times, watch what
you are doing and always proceed
with caution. Do not use the device if
you are tired or under the influence of
drugs, alcohol or medication. One mo
ment
of carelessness when using the device can lead
to serious injury.
b)
Wear personal protective
equipment and always wear
safety glasses. The wearing of
personal protective equipment such as dust
masks, non-slip safety shoes, safety helmets or
ear protectors, appropriate to the type of elec-
trical power tool used and work undertaken,
reduces the risk of injury.
c) Avoid unintentional operation of the
device. Check that the electrical power
tool is switched off before you connect
it to the mains, pick it up or carry it.
Accidents can happen if you carry the device
with your finger on the ON / OFF switch or with
the device switched on.
d) Remove any setting tools or spanners
before you switch the device on. A tool
or spanner left attached to a rotating part of a
device can lead to injury.
e) Avoid placing your body in an unnat-
ural position. Keep proper footing
and balance at all times. By doing this
you will be in a better position to control the
device in unforeseen circumstances.
f) Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep your
hair, clothing and gloves clear of mov-
ing parts. Loose clothing, jewellery or long
hair can become trapped in moving parts.
g) If vacuum dust extraction and collection
devices are fitted do not forget to
check
that they are properly connected and
correctly used. The use of these devices
reduces the hazard presented by dust.
4.
Careful handling and use
of electrical power tools
a) Do not overload the device. Always
use an electrical power tool that is
intended for the task you are under-
taking. By using the right electrical power
tool for the job you will work more safely and
achieve a better result.
b) Do not use an electrical power tool if
its switch is defective. An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
c) Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or when
the device is put away. This precaution is
intended to prevent you from unintentionally
starting the device.
d) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone use
the device if he or she is not familiar
with it or has not read the instructions
General safety advice for electrical power tools
61372_par_Handschleifer_content_LB7.indd 8 29.11.10 09:46
Descărcaţi manualul în limba română (PDF, 4.16 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Parkside PHS 160 A1 Şlefuitor delta, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Parkside PHS 160 A1 Şlefuitor delta?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Parkside PHS 160 A1 Şlefuitor delta. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Parkside PHS 160 A1 Şlefuitor delta. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Parkside. S-ar putea să ofere un manual original. Căutați manualul dvs. Parkside PHS 160 A1 Şlefuitor delta într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Parkside
Model PHS 160 A1
Categorie Şlefuitoare delta
Tip fișier PDF
Mărime fișier 4.16 MB

Toate manualele pentru Parkside Şlefuitoare delta
Mai multe manuale pentru Şlefuitoare delta

Întrebări frecvente despre Parkside PHS 160 A1 Şlefuitor delta

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Care este numărul modelului produsului meu Parkside? Verificat

Deși unele produse Parkside au un număr de model alternativ, toate au un număr IAN cu care produsul poate fi identificat.

A fost util (651) Citeşte mai mult

Pot depozita sculele electrice într-o magazie sau garaj? Verificat

În general, puteți depozita sculele electrice într-o magazie sau garaj, chiar dacă uneori îngheață acolo. Cu toate acestea, este mai bine pentru durata de viață a sculei electrice să o depozitați într-un loc uscat, fără fluctuații majore de temperatură. Într-o șopronă sau garaj, diferențele de temperatură pot provoca formarea de condens, care poate provoca rugina. În plus, uneltele care funcționează cu baterii durează mai puțin și nu se încarcă la fel de bine la temperaturi foarte scăzute. Pentru a fi sigur cum trebuie depozitată unealta electrică, citiți întotdeauna cu atenție manualul de utilizare.

A fost util (19) Citeşte mai mult
Manual Parkside PHS 160 A1 Şlefuitor delta

Produse asemanatoare

Categorii relevante

×
Download