Manual Parkside PWS 230 B2 Polizor unghiular

Manual

4

PWS 230 B2

GB

CY

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising

power tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and accessory

tools etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations different from those

intended could result in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

b) Always arrange for the exchange of the plug

or the power cord to be carried out by the

manufacturer of the appliance or by its ap-

proved customer services. This will ensure that

the safety of the power tool is maintained.

Safety advice for all uses

General safety advice for grinding polishing

and disc-cutting:

a) This electrical power tool is intended for use as

a grinding and disc-cutting machine. Observe

all the safety advice, instructions, information in

figures and all other information you received

with this device.

If you do not observe the following advice it could

lead to electric shock, fire and /or serious injury.

b) Operations such as sanding, wire brushing

or polishing are not recommended to be per-

formed with this power tool Operations for

which the power tool was not designed may

create a hazard and cause personal injury.

c) Do not use any accessory not specifically

intended by the manufacturer for this electrical

power tool. Although an accessory may fit on

your electrical power tool, this does not on its

own guarantee that it can be safely used.

d) The maximum permitted speed of an attach-

ment must be at least as high as the maximum

speed indicated for the electrical power tool.

An accessory rotating faster than its permitted

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Parkside PWS 230 B2 Polizor unghiular. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Parkside. S-ar putea să ofere un manual original. Căutați manualul dvs. Parkside PWS 230 B2 Polizor unghiular într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Parkside Polizoare unghiulare
Mai multe manuale pentru Polizoare unghiulare

Întrebări frecvente despre Parkside PWS 230 B2 Polizor unghiular

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Parkside IAN 276009 Polizor unghiular

Manual

Parkside PWSA 20-Li D4 Polizor unghiular

Manual

Parkside PWS 230 D4 Polizor unghiular

Manual

Parkside IAN 310953 Polizor unghiular

Manual

Parkside IAN 56295 Polizor unghiular

Manual

Parkside IAN 285213 Polizor unghiular

Manual

Parkside IAN 443996 Polizor unghiular

Manual

Parkside IAN 385580 Polizor unghiular

Categorii relevante