Manual Philips EP3349 Espressor

Manual

7

English

English

Brewing drinks

General steps

1 Fill the water tank with tap water and fill the bean hopper with beans.

2 Place the lid (A4) on the coffee bean hopper (A8).

3 Press the on/off button to switch on the machine.

-

The machine starts heating up and performs the automatic rinsing cycle. During heating up, the lights

in the drinks icons light up and go out slowly one by one.

-

When all lights in the drink icons light up continuously, the machine is ready for use.

4 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or down to adjust its

height to the size of the cup or glass you are using (Fig. 1).

Personalizing drinks

This machine allows you to adjust the settings of a drink to your own preference. After selecting a drink you

can:

1 Adjust the aroma strength by tapping the aroma strength icon (Fig. 2). There are 3 strengths, the lowest

is the mildest and the highest is the strongest.

2 Adjust the drink quantity by tapping the drink quantity (Fig. 3) and/or the milk quantity icon (specific

types only). There are 3 quantities: low, medium and high.

You can also adjust the coffee temperature to your own preference (see 'Adjusting the coffee

temperature').

Brewing coffee with beans

1 To brew a coffee, tap the drink icon of your choice.

-

The aroma strength and quantity lights go on and show the previously selected setting.

-

You can now adjust the drink to your preferred taste (see 'Personalizing drinks').

2 Press the start/stop button.

-

The light in the drink icon flashes while the drink is being dispensed.

3 To stop dispensing coffee before the machine is finished, press the start/stop button again.

To brew 2 coffees at the same time, tap the drink icon twice. The 2x light lights up.

Brewing milk-based drinks with LatteGo (milk container)

LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure the frame

and the milk container are properly assembled before you fill the milk container.

1 To assemble LatteGo, first insert the top of the milk container under the hook at the top of the frame

(Fig. 4). Then press the bottom part of the container. You hear a click when it locks into place (Fig. 5).

Note: Make sure that the milk container and the frame are clean before you connect them.

2 Slightly tilt LatteGo and put it on the hot water spout (Fig. 6). Then press it home until it locks into place

(Fig. 7).

3 Fill LatteGo with milk up to the level indicated on the milk container for the drink you are brewing (Fig.

8). Do not fill the milk container beyond the maximum indication.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Philips EP3349 Espressor. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Philips. S-ar putea să ofere un manual original. Căutați manualul dvs. Philips EP3349 Espressor într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Philips Espressoare
Mai multe manuale pentru Espressoare

Întrebări frecvente despre Philips EP3349 Espressor

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Philips EP5330 Espressor

Manual

Philips EP3363 Espressor

Manual

Philips EP4324 Espressor

Manual

Philips EP3347 Espressor

Manual

Philips EP5930 Espressor

Manual

Philips EP5310 Espressor

Manual

Philips EP5335 Espressor

Manual

Philips HD5730 Espressor

Categorii relevante