English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
OPERATING THE BLOWER
Ensure that the unit is not directed at anybody or any
loose debris before starting the unit.
Verify that the unit is in good working condition. Make
sure the tubes and guards are in place and secure.
To reduce the risk of hearing loss associated with
sound level(s), hearing protection is required.
Operate power equipment only at reasonable hours—
not early in the morning or late at night when people
might be disturbed. Comply with times listed in local
ordinances. Usual recommendations are 9:00 am to
5:00 pm, Monday through Saturday.
To reduce noise levels, limit the number of pieces of
equipment used at any one time.
To reduce noise levels, operate power blowers at the
lowest possible speed to do the job.
Use rakes and brooms to loosen debris before
blowing.
Conserve water by using power blowers instead
of hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills,
porches, and gardens.
Watch out for children, pets, open windows or freshly
washed cars, and blow debris safely away.
AIR VENTS
Never cover air vents. Keep them free of obstructions and
debris. They must always remain clear
for proper motor cooling.
OPERATING THE BLOWER
nozzle several inches above the ground
pile of debris in front of you. Most dry
blowing operations are better suited to low speeds, rather
than high speeds. High speed blowing is
a better way to move heavier items like large debris or
gravel.
STARTING /STOPPING THE BLOWER
Before start-up, make sure that the blower is in perfect
condition to guarantee safe operation.
Squeeze the switch trigger to start.
To change speed, press or release trigger by degrees
to increase or decrease the speed.
WARNING
To avoid serious personal injury, wear goggles or
safety glasses at all times when operating this unit.
Wear a face mask or dust mask in dusty locations.
WARNING
To prevent serious personal injury or damage to the
unit, make sure the blower tube is in place before
operating the unit.
CRUISE CONTROL LEVER See Figure 9.
This blower is equipped with a cruise control function.
Please read and understand the function of the Cruise
control lever.
Squeeze the trigger to start the unit.
Once the unit is on, pull the lever back clockwise to
increase the speed. This will lock the speed at the
desired setting.
To decrease the speed, push the lever counter
clockwise to decrease the speed to the desired
setting.
NOTE: If you decrease the speed all the way, the unit will
shut off and step one will need to be
repeated.
USING TURBO BUTTON See Figure 9.
This blower is equipped with a turbo button. Please read
and understand the function of the
turbo button.
Squeeze the switch trigger to start.
To boost speed, press the turbo button so that the
blower can be operated at the highest speed. Once
the turbo button is released, the blower will be
operated at the normal speed.
WARNING
To avoid serious personal injury, do not wear loose-
clothing or articles such as scarves, strings, chains,
ties, etc., that could be drawn into the air vents. Tie
back long hair to make sure it does not get drawn into
the air vents
3
Alăturați-vă conversației despre acest produs
Aici puteți împărtăși ce părere aveți despre Powerworks PD60BPB Refulator frunze. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.