Manual Qazqa 92303 New York Lampă

Manual

■ The sensor has a build-in photocell which making

the light only works from dust to dawn. In choosing a

location for your light, ensure that the sensor is not

placed near night time light sources such as porch

lighting or sheet lighting which will affect the photocell.

INSTALL THE LIGHT AND SOLAR PANNEL

1. Re-fix the lantern lid as Fig-2(A) shown and screw it

on the lantern’s main body by 2 lid screws.

2. Mount the solar panel and lantern light’s wiring box

on the position chosen as advices above by the anchors

and screws included in this package. (refer to Fig. 2B)

3.Fix the lantern body onto the wiring box by fixing

nuts.

►

NOTE: DO NOT INVERT THE LANTERN.

4. Connect the solar panel to your light by plugging

the 2 power cords together with the plug and socket in

a tight connection.

BEFORE USE FOR THE FIRST TIME

■ Ensure the power switch in wiring box of your light

is at the OFF position. In this position the solar cell will

charge the batteries without activating the light.

■ Leave the switch “off” for up to 2 days and make

sure the solar panel is placed in direct sunlight before

the first use. This gives the batteries in your Solar Light

has a full-charge for motion sensor adjustment and

normal operation. It is good for the batteries.

■ After the initial full-changing, shift the switch to

“ON” position. Now, your light is ready for serve.

UNDERSTAND THE CONTROLS

ADJUSTING THE DURATION TIME: The length light-on

time after activation can be adjusted from (10±5)

seconds to (90±15) seconds. Rotating the TIME knob

+ to - will reduce the duration time.

Note: Once the light has been triggered by the PIR

sensor any subsequent detection will renew the timed

period again from the beginning.

Adjusting the lux control level: The Lux control

module has a built-in sensing device (photocell) that

detects daylight and darkness. The ( ) position

denotes that load can work at day and night, and the

( ) position only work at night. You can set to operate

the unit at the desired level by adjusting the LUX knob.

Lantern Lid

Wall Mount

Screw (x 3)

Power cable

Gasket Rubber

Wireing Box

Fixing Nut (x 2)

Fig.2(B)

Fixing Screws (x 2)

Lantern Body

Transparent lens

Lid Screw (x 2)

TIME

+

-

Angle adjustment

support

Plug

Solar pannel

3 Screws and anchors for solar

pannel mounting bracket

Solar pannel

mounting bracket

Gasket

Rubber

Sensor

Switch

Adjusting knobs

LUX

►

►

►

►

Fig.3

REPLACE THE RECHARGEABLE BATTERIES

（refer to Fig. 3）

After 2 years, the charging ability of the batteries

decrease, they may be replaced by AA NIMH 1.2V

900mAh rechargeable batteries. Follow the

replacing steps in Fig.3’:

1. Remove the lantern lid by unscrew the lid screws.

2. Remove the battery plate.

3. Replace the batteries with right electrode

direction

4. Re-fix the battery plate and lantern lid back onto

their positions.

GENERAL ELECTICAL AND SAFETY WARING

1. Do not cut the power cord. Stop use if the wire

becomes frayed or broken.

2. Do not immerse the Solar Light or solar panel in

liquid.

3. Do not use any other solar panel other than the

one provided with this unit. This may result in injury

or damage to the light and with no warranty.

4. Position the power cord fastened and not moving

around or result in another hazard (such as tripping)

TECHNICAL SPECS:

Battery: 3x1.2V 900mAh AA NIMH Battery

Wattage: Max.4x0.5 Watt LED

Detection range: 100º (round) and Max. 6 meters

Duration time: 10±5 sec. to 90±15sec.adjustable

Weatherproof: IP44

NOTE: When your light comes to the end of its life

or you are to replace it. Please do not simply

dispose it with your normal household waste. Check

with your retailer or local authority for suitable

options.

New regulations encourage the recycling of Waste

from Electrical and Electronic Equipment (European

“WEEE Directive” effective August 2005).

Do not dispose of batteries in general household

trash or into a fire since the batteries may explode.

Consult your local regulations for correct disposal of

batteries. Do not take apart the batteries since they

contain corrosive chemicals.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Qazqa 92303 New York Lampă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Qazqa. S-ar putea să ofere un manual original. Căutați manualul dvs. Qazqa 92303 New York Lampă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Qazqa Lămpi
Mai multe manuale pentru Lămpi

Întrebări frecvente despre Qazqa 92303 New York Lampă

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Qazqa 102462 Sputnik Lampă

Manual

Qazqa 102351 Mangoes Lampă

Manual

Qazqa 102597 Wire Dos Lampă

Manual

Qazqa 102510 Magnax Lampă

Manual

Qazqa 102358 Virginia Lampă

Manual

Qazqa 102531 Notia Lampă

Manual

Qazqa 102212 Bota Lampă

Manual

Qazqa 102517 Magnax Lampă

Categorii relevante