Manual Ryobi R18MS216-0 Fierastrau circular stationar

Manual

Before fi rst use, ensure that the angle of the bevel or mitre

set on the product matches the angle to be produced on

the workpiece. Check this on a discarded piece of wood by

using a carpenter’s set or mitre square.

WARNING

The manufacturer strongly recommends that the product

is always securely mounted to a bench top.

When the base of the product is fi rmly secured to a bench

top by four nuts, bolts and washers as instructed, the

product can be used at maximum bevel and mitre setting

without the possibility of it tipping over. If the product is not

secured properly, the product may over balance when large

bevel angles are selected.

At the front of the mitre saw base there is an extending bar

which should be pulled out to its furthest extent. This will

help prevent the mitre saw from over balancing.

There is also an adjustable screw (balancing foot) that

extends from the bottom of the extension turntable. This

screw should be adjusted so that it touches the fl at surface

that the product is resting upon. This will also prevent the

product from over balancing when cutting at the full extent

of the slide and bevel. Beware, this part of the saw table

moves when diff erent mitre angles are selected, so the

screw needs to be frequently adjusted and reset.

MAINTENANCE

■ Do not modify the product in any way or use accessories

not approved by the manufacturer. Your safety and that

of others may be compromised.

■ Do not use the product if any switches, guards or

other functions does not work as intended. Return to

an authorised service centre for professional repair or

adjustment.

■ Do not make any adjustments whilst the saw blade is

in motion.

■ Always make sure the battery pack has been removed

from the product before making adjustments, lubricating

or when doing any maintenance on the product.

■ Before and after each use, check the product for

damage or broken parts. Keep the product in top

working condition by immediately replacing parts with

spares approved by the manufacturer.

■ The blade has sharp edges and may also remain hot

after cutting operations. Exercise extreme caution when

cleaning an exposed blade. Wear gloves to protect

yourself from personal injury.

■ Clean the saw and its accessories from dust regularly,

especially moving parts including the blade guard.

Use a hand brush or vacuum cleaner to remove dust

effectively. Do not use compressed air.

■ To assure safety and reliability, all repairs, including

changing brushes, should be performed by an

authorised service centre.

WARNING

Do not attempt to disassemble the blade guard assembly

for cleaning or repair. Damaged guards should not be

used. Return to an authorised service centre for repair

or replacement.

WARNING

For greater safety and reliability, all repairs should be

performed by an authorised service centre.

Mitre and bevel angle calibration

If mitre and bevel angle calibration are needed, see pages

234 – 239 and follow the calibration instructions.

Maximum cutting depth stop

The maximum cutting depth stop is to prevent the saw

blade from cutting into the metal base of the unit.

WARNING

The maximum cutting depth stop is not user adjustable.

Do not adjust the maximum cutting depth stop.

TRANSPORTATION AND STORAGE

■ When storing the product, remove the battery pack.

Store the product in a secure place that is not accessible

to children.

■ Clean the product using a brush and vacuum cleaner

before storage.

■ If you remove the saw blade or keep spares with

the unit, ensure they are in the original packaging to

prevent injury.

To secure the product prior to movement:

■ The product should be stored at the zero degree mitre

and bevel angle and locked in position. The slide should

be locked. The handle should be locked in the lower

(safe) position with the guards closed.

■ One or both sides of the extension bars can be removed

for ease of carrying.

To move or transport in a vehicle:

■ Secure the product prior to movement as described in

the manual.

■ Remove the product from the bench top by releasing

the 4 bolts, one at each corner. Secure the bolts for

future use. Lifting the product using the handle at the

top.

■ When lifting to a height, two persons wearing heavy

gloves are needed to lift the base of the product.

■ When transporting in a vehicle, set the product on its

base and secure against movement.

6

Original Instructions

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Ryobi R18MS216-0 Fierastrau circular stationar. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Ryobi. S-ar putea să ofere un manual original. Căutați manualul dvs. Ryobi R18MS216-0 Fierastrau circular stationar într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Ryobi Fierastraie circulare stationare
Mai multe manuale pentru Fierastraie circulare stationare

Întrebări frecvente despre Ryobi R18MS216-0 Fierastrau circular stationar

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Ryobi ETMS1825 Fierastrau circular stationar

Manual

Ryobi EMS190DC Fierastrau circular stationar

Manual

Ryobi RMS18254X-0 Fierastrau circular stationar

Manual

Ryobi RMS18190-0 Fierastrau circular stationar

Manual

Bosch GTM 12 JL Fierastrau circular stationar

Manual

Bosch GCM 350-254 Professional Fierastrau circular stationar

Manual

Parkside IAN 304475 Fierastrau circular stationar

Manual

Metabo KGSV 216 M Fierastrau circular stationar

Categorii relevante