Manual Skil 0755 AA Trimmer de gard viu

Ai nevoie de un manual pentru Skil 0755 AA Trimmer de gard viu? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 4 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

12

a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or


 Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for

of parts and any other condition that may affect the

tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) 

account the working conditions and the work to be
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
h) 
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
c) 


make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a re.
d) 
from the battery; avoid contact. If contact

 Liquid
ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or
modified. Damaged or modied batteries may exhibit
unpredictable behaviour resulting in re, explosion or risk
of injury.
f) Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to re or temperature
above 130°C may cause explosion.
g) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
6) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.

SHRUB/GRASS SHEARS
GENERAL
Only use the tool in daylight or with appropriate articial
lighting
Do not trim hedges when they are wet
Keep hands and feet away from the cutting blade,
especially when switching on the tool
Never operate the tool in the direct vicinity of persons
(especially children) and animals
The user is responsible for accidents or hazards
occurring to other people or their property
Always switch o tool and ensure that all moving parts
have come to a complete standstill
- whenever leaving the tool unattended
- before clearing jammed material
- before checking, cleaning or working on the tool
- after striking a foreign object
- whenever the tool starts vibrating abnormally
BEFORE USE
Before using the tool for the rst time, it is recommended
to receive practical information
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the charger
Check the functioning of the tool before each use and, in
case of a defect, have it repaired immediately by a
qualied person; never open the tool yourself
Before use, thoroughly inspect the cutting area and
remove all foreign objects that could be entangled in the
cutting blades (such as stones, nails, wire fences, metal
plant supports)
DURING USE
Wear protective gloves, safety glasses, close-tting
clothes and hair protection (for long hair)
Always wear long trousers, long sleeves and sturdy
shoes when operating the tool
Take a secure stance when working (do not overreach,
especially when using steps or a ladder)
Hold the power tool by the insulated gripping

contact hidden wiring or its own cord (cutting blades
contacting a “live” wire may make exposed metal parts of
the power tool “live” and could give the operator an
electric shock)
Keep all parts of the body away from the cutting


the switch is off when clearing jammed material (a
Descărcaţi manualul în limba română (PDF, 10.6 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Skil 0755 AA Trimmer de gard viu, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Skil 0755 AA Trimmer de gard viu?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Skil 0755 AA Trimmer de gard viu. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Skil 0755 AA Trimmer de gard viu. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Skil. S-ar putea să ofere un manual original. Căutați manualul dvs. Skil 0755 AA Trimmer de gard viu într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Skil
Model 0755 AA
Categorie Trimmere de gard viu
Tip fișier PDF
Mărime fișier 10.6 MB

Toate manualele pentru Skil Trimmere de gard viu
Mai multe manuale pentru Trimmere de gard viu

Întrebări frecvente despre Skil 0755 AA Trimmer de gard viu

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

De unde știu că gardianul meu este contondent? Verificat

Atunci când ramurile sunt trase în loc să fie tăiate, garda-gardă este ascuțită și trebuie ascuțită.

A fost util (348) Citeşte mai mult

Cum îmi ascuți lamele de tăiat gard viu? Verificat

Ascuțirea lamelor tăietorului gard viu este importantă pentru menținerea performanței și eficienței instrumentului. Pentru a ascuți lamele, veți avea nevoie de o pilă sau o piatră de ascuțit special concepută pentru tipul de lamă de pe tăietorul de gard viu.

A fost util (302) Citeşte mai mult

Cum îmi ung lamele tăietorului gard viu? Verificat

Lubrifierea lamelor tăietorului gard viu va ajuta la reducerea frecării și uzurii, prelungind durata de viață a sculei. Utilizați un ulei lubrifiant de înaltă calitate special conceput pentru tăietorii gard viu și aplicați o cantitate mică pe lame după fiecare utilizare.

A fost util (148) Citeşte mai mult

Cum pot preveni formarea ruginii pe lamele mele de tăiat gard viu? Verificat

Rugina poate cauza deteriorarea lamelor tăietorului gard viu, reducându-le performanța și durata de viață. Pentru a preveni rugina, curățați și uscați bine lamele după fiecare utilizare și depozitați-le într-un loc uscat și curat. De asemenea, puteți lua în considerare aplicarea unui strat de protecție, cum ar fi ulei sau un inhibitor de rugină, pe lame înainte de a le depozita.

A fost util (90) Citeşte mai mult
Manual Skil 0755 AA Trimmer de gard viu

Produse asemanatoare

Categorii relevante

×
Download