Manual Skil 3076 HC Maşină de găurit-înşurubat

Manual

12

- changing round bits into 10 mm chuck q

! do not use bits with a damaged shank

• Combined switch for on/o and speed control J 2

- control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• Battery level indicator w

- press the battery level indicator button M to show the

current battery level wa

! when the lowest level of the battery indicator

wb, the

battery is empty

! 

after pressing button Mwc, the battery is not

within the allowable operating temperature range

• Attaching belt clip e

- attach the belt clip U to the drill with the supplied screw.

• Integrated bit clip N 2

- conveniently store hex bits.

• Strap xing P 2

- attach a wrist strap (not standard included) around your

hand when carrying the tool.

• Changing direction of rotation r

- when not properly set in left/right position, switch J 2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Torque control (VariTorque) t

- output torque will increase as clutch ring G is rotated

from 1 to 17

- when turning in a screw, rst try VariTorque position 1

and increase until the desired depth has been reached

- position E will lock up the clutch to permit (non-impact)

drilling or driving heavy-duty work

- position F will lock up the clutch to permit impact

drilling only

! ensure that gear selector C is in position 2 when

function selector H is in impact drilling position

! do not use impact drilling position F for drilling in

wood, metal, ceramic and plastic to prevent the

drill/screw bit from being damaged

• Mechanical gear selection y

- set selector C to desired speed

! actuate the gear selector while tool is running

slowly

1

- low speed

- high torque

- for screwdriving and drilling large diameters

- for tapping thread

2

- high speed

- lower torque

- for impact drilling

- for drilling small diameters

• LED light L u

- LED light L will illuminate in default low brightness

mode when the tool is turned on or if LED-light button K

is depressed without turning the tool on.

- Brightness can be switched from o to low to high or

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

BATTERIES

• The battery supplied, if any, is partially charged (to

ensure full capacity of the battery, completely charge the

battery in the battery charger before using your power

tool for the rst time)

• Only use the following batteries and chargers with

this tool

- SKIL battery: BR1*31****

- SKIL charger: CR1*31****

• Do not use battery when damaged; it should be replaced

immediately

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

• when charging 4...40°C

• during operation –20...+50°C

• during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3

Read the instruction manual before use

4

Batteries may explode when disposed of in re, so do not

burn battery for any reason

5

Store tool/charger/battery in locations where temperature

will not exceed 50°C

6

Do not dispose of electric tools and batteries together

with household waste material

USE

• Assemble

- attaching/detaching drill attachments 7, the drill is

shipped with 4 dierent attachments:



10 mm chuck attachment R



1/4” hex bit holder attachment Q



right angle attachment S



oset attachment T

- pull unlocking ring forwards and press the attachment

all the way onto the tool holder

- lock the attachment in the required angular position

- release unlocking ring and check that the attachment is

locked in position

! if the attachment is not locked, you might need



attachment

- connecting attachments to the right angle attachment

S 8

- changing 1/4” hex bit into tool holder, oset attachment

T, or right angle attachment S 9a

- changing 1/4” hex bit into 1/4” hex bit holder attachment

Q 9b



pull locking sleeve forward, insert the bit into chuck

and release the locking sleeve to lock the bit

! only use bits with ball catch, other bits can be

used with a universal bit holder with ball catch

! to avoid loss of control, ensure bit is locked in

chuck by pulling on bit after it has been inserted

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Skil 3076 HC Maşină de găurit-înşurubat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Skil. S-ar putea să ofere un manual original. Căutați manualul dvs. Skil 3076 HC Maşină de găurit-înşurubat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Skil Maşini de găurit-înşurubat
Mai multe manuale pentru Maşini de găurit-înşurubat

Întrebări frecvente despre Skil 3076 HC Maşină de găurit-înşurubat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Skil 3060 EA Maşină de găurit-înşurubat

Manual

Skil 3018 RC Maşină de găurit-înşurubat

Manual

Skil 3076 CA Maşină de găurit-înşurubat

Manual

Skil 3021 HB Maşină de găurit-înşurubat

Manual

Skil 3011 AA Maşină de găurit-înşurubat

Manual

Skil 3085 CA Maşină de găurit-înşurubat

Manual

Skil 3070 EA Maşină de găurit-înşurubat

Manual

Skil 3020 HA Maşină de găurit-înşurubat

Categorii relevante