Manual Skil 7380 AA Mașină de șlefuit orbitală

Manual

8

• On/o switch

- switch on/o the tool by pushing switch A 2 forward/

backwards

! before the sanding surface reaches the

workpiece, you should switch on the tool

! before switching off the tool, you should lift it

from the workpiece

• Speed control

For optimal sanding results on dierent materials

- with wheel B 2 you can set the desired sanding

speed

- adjust speed to grit size used

- before starting a job, nd the optimal speed and grit by

testing out on spare material

• Holding and guiding the tool 8

! while working, always hold the tool at the

grey-coloured grip area(s)

- guide the tool parallel to the working surface

! do not apply too much pressure on the tool; let

the sanding surface do the work for you

- do not tilt the tool in order to avoid unwanted sanding

marks

- keep ventilation slots E 2 uncovered

• Sanding

- the amount of material removed is determined by the

selection of the sanding sheet and the applied

pressure

! intensifiying the sanding pressure does not lead

to an increase of the sanding capacity, but to

increased wear of the tool and the sanding sheet

! never use the same sanding sheet for wood and

metal

APPLICATION ADVICE

• Move the tool in straight movements in line with the grain

- for sanding bare wood surfaces

- for extra ne nishing

• Recommended sanding sheet grits:

- for removing paint and for sanding of extremely rough

wood use coarse grit sizes (40, 60)

- for sanding of rough or plain wood use medium grit

sizes (80, 100, 120)

- for smoothing of wood and surfaces with old paint as

well as for nishing of bare wood use ne grit sizes

(180, 240, 320)

! always test out first on a piece of scrap material

• Use dierent grit sizes when the working surface is

rough:

- start sanding with coarse or medium grit

- nish with ne grit

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots E 2)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol 5 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 84 dB(A) and the sound power

level 95 dB(A) (standard deviation: 3 dB), and the vibration

9.1 m/s² (triax vector sum; uncertainty K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns



Ponceuse vibrante 7380

INTRODUCTION

• Cet outil sert au ponçage et au polissage à sec du bois,

des surfaces peintes, du plastique et du mastic

• Cet outil n’est conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur marche/arrêt

B Molette de réglage de la vitesse de ponçage

C Réservoir à poussière

D Bouton de retrait du réservoir à poussière

E Fentes de ventilation

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Skil 7380 AA Mașină de șlefuit orbitală. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Skil. S-ar putea să ofere un manual original. Căutați manualul dvs. Skil 7380 AA Mașină de șlefuit orbitală într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Skil Mașini de șlefuit orbitală
Mai multe manuale pentru Mașini de șlefuit orbitală

Întrebări frecvente despre Skil 7380 AA Mașină de șlefuit orbitală

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Skil 0666 A1 Mașină de șlefuit orbitală

Manual

Skil 7445 AA Mașină de șlefuit orbitală

Manual

Skil 7455 AA Mașină de șlefuit orbitală

Manual

Skil 7335 AG Mașină de șlefuit orbitală

Manual

Skil 7352 AA Mașină de șlefuit orbitală

Manual

Skil 7361 AA Mașină de șlefuit orbitală

Manual

Skil 7348 AA Mașină de șlefuit orbitală

Manual

Skil 7366 AC Mașină de șlefuit orbitală

Categorii relevante