Manual Tefal KI831E10 Fierbător

Ai nevoie de un manual pentru Tefal KI831E10 Fierbător? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 5 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

76
2. PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM WATER
SPLASHES AND ANY SOURCES OF HEAT.
Kettle is only to be used with the base provided.
3. FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. (g 3)
Never fill the kettle when it is on its base.
Do not fill it above the maximum level, or below the minimum level. If the kettle is too full,
boiling water may spill out.
Do not use without water.
Check that the lid is closed properly before use.
4. POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.
5. TO START THE KETTLE
When the kettle is placed on the base, all the lights illuminate. The water temperature in the kettle
is displayed on-screen.
TO HEAT WATER:
2 options:
If you wish to start a boil cycle, press the
button, the 100° blinks 4 times, accompanied with
a long beep. The kettle then shows the real water temperature and starts heating the water.
If you wish to select the temperature – 5 possible settings: 40°C – 70°C – 80°C – 90°C – 100°C –
press the
key until it displays the temperature you wish to select. The selected temperature
blinks 4 times, accompanied with a long beep. The kettle then shows the real water temperature
and starts heating the water.
You can monitor the live temperature of the water on the screen.
Once the selected temperature is reached, the kettle beeps twice and stops heating.
If you wish to turn off the heating programs, just press the
or
.
PLEASE NOTE
After 90°C, the kettle will boil water, stop, then restart boiling water. This circulation will happen
several times and continue to the end of the heating process.
KEEP WARM MODE
You can use the keep warm mode to keep the water at your desired temperature during 30 minutes.
Once the temperature has been selected, a long push on
or
will activate the keep warm
mode at selected temperature. 2 lights around the
will be illumed.
You can also start the keep warm mode once the temperature has been reached. Do a long push
on the
or key. The will let you keep warm at selected temperature, while will let
you keep warm at 95°C. 2 lights around the
will be illumed.
If you wish to turn off the keep warm mode, just press the
or key.
PLEASE NOTE
The long push will activate the keep warm only if you push the button less than 30 seconds after
the end of the boiling cycle, otherwise the screen will switch off.
PLEASE NOTE
The screen automatically switches off after 30 seconds – unless you have selected the keep warm
mode – but pressing any key will turn the screen on again anytime.
If you select 100°C and activate the keep warm function, the kettle keeps the temperature at 95°C
for 30mins.
If the temperature of the water in the kettle is higher than the temperature you select when
pressing
, the heating won’t start.
For instance, if the water temperature is 90°C, you won’t be able to launch the heating by
selecting 40°C, 70°C or 80°C.
RECOMMENDED TEMPERATURES
40°C: baby milk
70°C : white tea
80°C : green tea
90°C : freshly ground coffee
100°C : boiling water/infusions
6. THE KETTLE WILL SWITCH OFF AUTOMATICALLY
As soon as the water reaches boiling point or the chosen temperature.
Do not leave water in the kettle after use as this quickens the formation of scale.
CLEANING AND MAINTENANCE
CLEANING YOUR KETTLE
Unplug it.
Let it cool down and clean it with a damp sponge.
Never immerse the kettle, its base, the cord or the electric plug in water: the electrical
connections or the switch must not come into contact with water.
Do not use scouring pads.
Do not wipe the display while plugged in, it may cause unexpected start-up.
CLEANING THE FILTER*
The removable filter consists of a mesh to retain the particles of scale and prevent them falling into your
cup when pouring. This filter neither treats nor removes the hardness of the water. It thus conserves
all the qualities of the water. With very hard water, the filter can clog very quickly (10 to 15 uses). It is
important to clean it regularly. Sometimes the scale will not detach itself; it will then need descaling.
DE-SCALING
De-scale regularly, preferably at least once a month or more frequently if your water is very hard.
Temperature detection in the kettle may be affected by limescale.
To de-scale your kettle:
Using white vinegar which can be bought from hardware stores:
Fill the kettle with ½ litre of white vinegar,
Leave to stand for 1 hour without heating.
Using citric acid:
Boil ½ litre of water,
Add 25 g of citric acid and leave to stand for 15 min.
Empty your kettle and rinse 5 or 6 times. Repeat if necessary.
To de-scale your filter*:
Soak the filter in white vinegar or diluted citric acid.
Never use a de-scaling method other than that recommended.
IN THE EVENT OF PROBLEMS
THERE IS NO EVIDENT DAMAGE TO YOUR KETTLE
The kettle does not work
Check that your kettle is properly connected.
The kettle has been switched on without water or an accumulation of scale has caused the
overheat cut-out to operate: allow the kettle to cool and fill it with water. Descale first if scale
has accumulated.
Switch it on: the kettle should start working again after about 15 minutes.
* according to models
EN
Descărcaţi manualul în limba română (PDF, 0.8 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Tefal KI831E10 Fierbător, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Tefal KI831E10 Fierbător?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Tefal KI831E10 Fierbător. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Tefal KI831E10 Fierbător. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Tefal. S-ar putea să ofere un manual original. Căutați manualul dvs. Tefal KI831E10 Fierbător într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Tefal
Model KI831E10
Categorie Fierbătoare
Tip fișier PDF
Mărime fișier 0.8 MB

Toate manualele pentru Tefal Fierbătoare
Mai multe manuale pentru Fierbătoare

Întrebări frecvente despre Tefal KI831E10 Fierbător

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Pentru ce este sită în ceainicul meu? Verificat

Aceasta este pentru a prinde orice calcar liber care s-ar fi putut acumula în timp.

A fost util (492) Citeşte mai mult

Ceainicul nu se termină și continuă să fiarbă, ce ar trebui să fac? Verificat

În multe cazuri, capacul fierbătorului nu a fost închis corect. Dacă se lasă să scape căldură, fierbătorul va fierbe în continuare. Dacă acest lucru nu rezolvă problema, trebuie să contactați producătorul sau un mecanic.

A fost util (327) Citeşte mai mult

Pot fierbe mai puțin decât cantitatea minimă de apă? Verificat

Nu. Când fierbe mai puțin decât cantitatea minimă de apă, este posibil ca senzorul de temperatură să nu funcționeze corect. Acest lucru ar putea împiedica fierbătorul să se oprească la punctul de fierbere, rezultând situații posibil periculoase.

A fost util (150) Citeşte mai mult

Este eficient să umpleți un ceainic cu apă fierbinte de la robinet? Verificat

Nu. Pentru a aduce apă caldă la robinet, este adesea necesar să lăsați mai întâi apa rece, care va fi irosită. De asemenea, conductele vor umple aceeași cantitate de apă fierbinte care nu va fi folosită și se va răci, ceea ce duce la pierderi de energie. Prin urmare, este mai bine să umpleți un ceainic cu apă rece.

A fost util (98) Citeşte mai mult

Pot fierbe mai mult decât cantitatea maximă de apă? Verificat

Nu. Când fierbeți mai mult decât cantitatea maximă de apă, fierbătorul s-ar putea revărsa. Acest lucru ar putea duce la situații posibil periculoase.

A fost util (96) Citeşte mai mult
Manual Tefal KI831E10 Fierbător

Produse asemanatoare

Categorii relevante

×
Download