Manual Tryton TUV12BK2 Maşină de găurit-înşurubat

Manual

4

e) Power tools require maintenance. Check power tools for

concentricity or jamming of moving parts, any cracks and all

other factors affecting the power tool work safety. If any

damage to the power tool is detected, it should be repaired

before use. Improper power tool maintenance is a reason for many

accidents.

f) Cutting tools should be sharp and clean. Keeping sharp cutting

edges in good condition reduces the risk of jamming and facilitates

operation.

g) Power tools, equipment, working tools etc. should be used

according to this user's manual taking into account

operating conditions and the work to be done. Misusing a

power tool can result in dangerous situations.

h) At low temperatures and after a long brakes in operation it is

recommended to turn the power tool to operate it with no

load for a few minutes to provide proper grease distribution

inside its driving mechanism.

i) Use soft, damp (cannot be wet) cloth and soap to clean power

tools. Do not use petrol, solvents and other agents that may

damage your equipment.

j) Power tools can be stored/carried after making sure that all

moving components are locked and protected against

release with original devices intended for this purpose.

k) Store power tools in a dry, dust and water-protected place.

l) Carry your power tool in its original packaging to provide

protection against mechanical damage.

WARNING! General warnings regarding the use of

power tools.

Repair:

WARNING! Cordless drill/driver, security warnings –

Personal Safety:

a) Use hearing protection when using drill/driver. Exposure to

noise can cause hearing loss.

b) During work, when the power tool or drill might encounter a

hidden electricity wire or its own lead, the power tool must

be held by the insulated areas of the handle. Cutting accessory

contacting a "live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

c) Use appropriate detectors to determine if utility lines are

hidden in the work area or call the local utility company for

assistance. Contact with electric lines can lead to fire and electric

shock. Damaging a gas line can lead to explosion. Penetrating a water

line causes property damage or may cause an electric shock.

d) Do not work materials containing asbestos. Asbestos is

considered carcinogenic.

e) Keep your workplace clean and tidy. Material mixtures are

extremely dangerous. Light metal dusts can ignite or explode.

f) Protect the object machined. Make sure all clamps are closed and

check for excessive clearance. It is safer to fix the object machined in a

fixing device or a vice than holding it in your hand.

a) Power tools can be repaired by competent persons only who

use original spare parts. It will provide safe operation for the power

tool.

screws, short moments of strong movements in reaction to this action

may occur.

h) Turn the power tool immediately when the bit jams. Expect

intense vibrations that can result in a kickoff. The bit jams

when the power tool is overloaded or is bent inside the object.

i) Before you put the power tool aside make sure it is

completely stopped. The bit can jam resulting in losing control over

the power tool.

WARNING!

a)

b) WARNING: In case of damage or improper use of the battery,

explosive gases might be released. The battery must be kept

away from fire and proper ventilation is to be assured during

charging. It cannot be left for a longer period of time in a high

temperature environment (areas with strong exposure to the sun, close

to radiators or any other place with a temperature above 40 degrees).

c)

d) The battery should be charged only using the charger that

was supplied with the power tool. If another charger is used,

breaking and disintegration of the battery, bodily harm, or fire are

possible.

e)

f)

g)

h)

i)

j)

k)

g) Hold the power tool tightly. During driving and loosening of

Safe use of rechargeable batteries and

battery chargers -

Using the battery:

Use only the batteries that correspond to specifications

required by the equipment manufacturer. Use of unsuitable

batteries may lead to cracks and destruction of the battery, personal

injuries or fires.

The battery must be charged within the temperature range

of 15 to 25ºC.

Never expose the battery to the effect of water or moisture.

When another battery is to be charged in sequence the time

gap between charging operations must be not less than 30

minutes.

In no case may you open the battery.

Under extreme conditions a leak of electrolyte from the

battery may occur. If so, use a cloth to wipe out the liquid

from the battery. Avoid contact of electrolyte with skin.

When a contact may happen anyway flush the contaminated place

with copious amount of water and then neutralize with mild acid

(lemon juice, vinegar). When syndromes of irritation persist seek for

medical attendance.

In case of contact with eyes wash the eye with isotonic salt solution

or with pure water, continue for about 10 minutes. DO NEVER

PROTECT WITH A BANDAGE, seek for medical attendance.

Avoid shorts of the battery terminals by any metal things

(never store the battery in a bag or in a pocket with other

metal tools) – it may lead to a fire!

Never throw batteries to fireplaces.

Never charge a damaged battery.

The batteries are designed for repeatable charging for many

times but they contain cadmium and nickel that are hazardous

for the natural environment.

Upon the battery lifetime expires the battery must be disposed

in accordance with environmental regulations. Discharge the

battery first top the empty state and remove from the electric tool. Hand

over to an organization that deals with utilization of batteries or take it

back to the shop where the tool had been purchased.

Ni-Cd

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Tryton TUV12BK2 Maşină de găurit-înşurubat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Tryton. S-ar putea să ofere un manual original. Căutați manualul dvs. Tryton TUV12BK2 Maşină de găurit-înşurubat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Tryton Maşini de găurit-înşurubat
Mai multe manuale pentru Maşini de găurit-înşurubat

Întrebări frecvente despre Tryton TUV12BK2 Maşină de găurit-înşurubat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Tryton TUV18LB2 Maşină de găurit-înşurubat

Manual

Tryton TUV14LB2 Maşină de găurit-înşurubat

Manual

Tryton TXV14LK2 Maşină de găurit-înşurubat

Manual

Tryton TUV18BK2 Maşină de găurit-înşurubat

Manual

Tryton TUV14BK2 Maşină de găurit-înşurubat

Manual

Tryton TXV18LK2 Maşină de găurit-înşurubat

Manual

Verto 50G187 Maşină de găurit-înşurubat

Manual

Ryobi LLCDI1802 Maşină de găurit-înşurubat

Categorii relevante