EN
5
1. SAFETY INSTRUCTIONS
The following symbols are used in the user manual or on the
product:
Read the user manual.
Denotes risk of personal injury, loss of life or damage
to the tool in case of nonobservance of the instructions
in this manual.
LASER
2
Risk of eye injury due to laser beams! Never
look directly into the laser and do not direct
the laser beam towards reflecting surfaces.
The product is in accordance with the applicable safety
standards in the European directives.
GENERAL SAFETY WARNINGS
Save all warnings and instructions for future reference.
• To operate this device safely, the user must have read and
understood these instructions for use before using the device
for the first time.
• Observe all safety instructions! Failure to do so may cause
harm to you and others.
• Retain all instructions for use, and safety instructions for
future reference.
• If you sell or pass the device on, you must also hand over
these operating instructions.
• The device must only be used when it functions properly. If the
product or part of the product is defective, it must be taken
out of operation and disposed of correctly.
• Never use the device in a room where there is a danger of
explosion or in the vicinity of flammable liquids or gases.
• Keep children away from the device! Keep the device out of
the way of children and other unauthorised persons.
Using battery-operated devices
• Only use batteries approved by the manufacturer.
• Danger of fire! Never charge the batteries.
• Keep batteries away from metal objects that could cause
short circuiting when not in use. There is a risk of injuries and
fires.
• Fluid can escape from the battery when used incorrectly.
Battery fluid may result in skin irritations and burns. Avoid
contact! In the event of accidental contact, rinse thoroughly
with water. Immediately seek the aid of a physician in the
event of eye contact.
Machine specific safety instructions
• The device is intended for using in dry environment.
• Avoid the influence of humidity and dirt as well as direct sun
rays.
• Do not operate the device in the proximity of welding
machines, induction heaters and other electromagnetic fields.
• Do not expose the device to high temperatures for a longer
period of time.
• Symbols appearing on your device may not be removed or
covered. Signs on the device that are no longer legible must
be replaced immediately.
Handling of laser beams
• Do not look directly into the beam, not even from great
distances.
• Never direct the measuring beam towards people, other living
creatures or reflecting surfaces.
• Conventional laser glasses do not protect against the dangers
of laser beams. They only serve for improved recognition of
the laser beam.
Maximum outputs: ≤1mW λ=620~670nm
CONSUMER LASER PRODUCT
EN50689:2021 EN60825-1:2014+A11:2021
2. PRODUCT INFORMATION
Intended use
This laser distance meter can be used when requiring the
measurement of an area of a room. This measuring tool is
intended for measuring distances, lengths and heights in a
straight line from 0.03m to 20m and can calculate areas and
volumes.
TECHNICAL SPECIFICATIONS
Model No. LD504DC
Measurement range 0.03 - 20m**
Measuring accuracy ±3mm*
Laser type 620-670nm
Alăturați-vă conversației despre acest produs
Aici puteți împărtăși ce părere aveți despre Vonroc LD504DC Telemetru digital. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.