Manual Whirlpool FFT M11 82B EE R Uscător

Ai nevoie de un manual pentru Whirlpool FFT M11 82B EE R Uscător? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 6 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

THANK YOU FOR BUYING AN INDESIT PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.register10.eu
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
Using QR code in your appliance
Visiting our website docs.indesit.eu and parts-selfservice.europeanappliances.com
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identification plate.
You can find more information about your model online at https://eprel.ec.europa.eu/ which is the official EU EPREL product database.
After selecting the Product Category, enter the Model Identifier of the product. The Model Identifier is made up of letters and numbers
and can be found on the identification plate, as Mod. (see image on the right).
EN
Before using the appliance carefully
read the Safety Instruction.
PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO REACH MORE INFORMATION.
Quick guide
Before using the appliance carefully
read the Safety Instruction.
Power consumption
off-mode (Po) - Watts 0.42
left-on mode (Pl) - Watts 2.00
Programs Kg kWh Minutes
Eco *
8 1.95 194
Eco
4 1.06 135
Synthetics 4 0.73 95
*The ECO is the most efficient programme in terms of energy
consumption for drying wet cotton laundry, and is used to assess
compliance with Regulation (EU) 932/2012.
Cleaning the tumble dryer
The external metal, plastic and rubber parts can be cleaned
with a damp cloth.
Clean the front air intake grille regularly (every 6 months) with
a vacuum cleaner to remove any lint, fluff or dust deposits.
Furthermore, remove any lint deposits from the filters area,
using a vacuum cleaner every so often.
Do not use solvents or abrasives.
AB
1
4
2
3
C
C1 C2 C3
C4
C5
C6
CLEANING AND MAINTENANCE
WARNING: unplug the dryer during the cleaning and
maintenance procedures.
Emptying the water tank after each cycle (see Fig. A).
Pull the container out of the dryer and empty it into a sink or other
suitable drain, then place it back properly. Do not use the dryer
without having inserted the container back in place.
Cleaning the lters
Take out the filters and clean them by removing the lint from their
surfaces with your hand or a cloth or using a vacuum cleaner, then
put them back in place. The lint should be thrown in the garbage
bin and not washed through the drain in order to avoid spreading
microplastics in the used water system.
Do not use the dryer without having reinserted the lter in place.
Cleaning the door lter after each cycle (see Fig. B).
Remove the door filter as described below:
1. Open the door and pull the filter upwards.
2. Open the filter and remove the lint from all its parts.
Make sure to also remove any foreign objects inside the
filter and
the drum.
Replace the filter correctly making sure it is fully seated.
Cleaning the bottom lter when the relevant indicator
turns on (see Fig. C).
NOTE: however, it is advisable to clean this filter after each cycle
to optimise drying performance.
Remove the bottom filter as described below:
C1. Open the bottom cover; take the handle and pull the filter out.
C2. Open the rear side of the filter and remove the lint from the
inner surface of the mesh.
C3/C4. Check the bottom filter chamber every month. If you
see residual lint accumulated on the metal fins, clean it with a
vacuum cleaner, using a nozzle with a brush.
It's crucial to do vertical movements, you may destroy the
component if you try to clean it in horizontal direction. Avoid the
direct contact of the hand with the fins - risk of cut.
C5. Close the rear side of the filter and place it back by checking it
is perfectly integrated into its seat, then lower the filter handle.
C6. Close the bottom cover.
Make sure the air intake is free.
The lters are essential parts for drying. They are intended
to collect the lint formed during the drying process. In case
of clogged lters, the air ow inside the dryer would be
seriously aected: the drying times would be longer, the
energy consumption would increase and the dryer could be
PRODUCT DESCRIPTION
1. Water Tank
2. Air Intake
3. Bottom filter
4. Door filter
TRANSPORT AND HANDLING
Never lift the dryer by holding it at the worktop.
1. Unplug the dryer.
2. Remove the water from the water tank completely.
3. Make sure that door and water tank are properly closed.
4. If the drain hose is connected to your drainage system,
re-connect it to the back of the dryer (see "Installation" section
in the Safety Instruction guide).
damaged. If these procedures are not carried out properly,
the dryer may not start.
NOTE: After cleaning the filters the relevant indicator remains on;
this is normal, it will disappear when you start a new drying cycle.
Descărcaţi manualul în limba română (PDF, 44.45 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Whirlpool FFT M11 82B EE R Uscător, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Whirlpool FFT M11 82B EE R Uscător?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Whirlpool FFT M11 82B EE R Uscător. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Whirlpool FFT M11 82B EE R Uscător. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Whirlpool. S-ar putea să ofere un manual original. Căutați manualul dvs. Whirlpool FFT M11 82B EE R Uscător într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Whirlpool
Model FFT M11 82B EE R
Categorie Uscătoare
Tip fișier PDF
Mărime fișier 44.45 MB

Toate manualele pentru Whirlpool Uscătoare
Mai multe manuale pentru Uscătoare

Întrebări frecvente despre Whirlpool FFT M11 82B EE R Uscător

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

De ce tamburul uscătorului meu este mai mare decât cel al mașinii de spălat, deși au aceeași capacitate? Verificat

Pentru a usca corect rufele, un uscător trebuie să aibă aer. Acest lucru are nevoie de spațiu și de aceea tamburul trebuie să fie mai mare.

A fost util (3216) Citeşte mai mult

Care este diferența dintre un uscător cu condensator și un uscător cu aerisire? Verificat

Într-un uscător cu condensator, vaporii de apă condensată sunt drenați și colectați într-un rezervor intern. Într-un uscător aerisit, aerul fierbinte și umed este evacuat printr-un furtun, de exemplu, dintr-o fereastră. Un uscător cu aerisire este mai ieftin de utilizat decât un uscător cu condensator

A fost util (1117) Citeşte mai mult

Ce înseamnă „al 6-lea simț”? Verificat

Aparatele Whirlpool echipate cu tehnologia 6th Sense au senzori care asigură funcționarea optimă a mașinii. De exemplu, în uscătoare, acești senzori măsoară umezeala lăsată în spălare și opresc mașina atunci când totul este complet uscat.

A fost util (900) Citeşte mai mult

Pot să-mi stivuiesc uscătorul și mașina de spălat? Verificat

În general, este posibil să stivuiți direct un uscător și o mașină de spălat direct unul peste celălalt. Acest lucru funcționează numai cu modelele de încărcare frontală. Cu toate acestea, este recomandabil să utilizați un accesoriu adecvat pentru a face acest lucru. Acest lucru va împiedica vibrația și căderea mașinilor și, de asemenea, previne deteriorarea mașinii de jos.

A fost util (861) Citeşte mai mult

Pot conecta un uscător la un cablu prelungitor? Verificat

Aparatele care necesită cantități mari de energie, cum ar fi un uscător, nu pot fi conectate la toate prelungitoarele. Vedeți care este consumul de energie al uscătorului, care este indicat în wați, și verificați dacă prelungitorul poate rezolva acest lucru. Există cabluri prelungitoare cu cabluri mai groase care sunt făcute pentru a manipula aparate mai mari.

A fost util (693) Citeşte mai mult

Care este diferența de utilizare între o mașină de spălat-uscător și o mașină de spălat și uscător separat? Verificat

Cel mai mare avantaj al unei mașini de spălat cu uscător este că necesită mai puțin spațiu. Cu toate acestea, un uscător separat va putea usca mai mult decât o mașină de spălat-uscător. O mașină de spălat cu uscător consumă, de asemenea, relativ mai multă energie și necesită mai mult timp.

A fost util (687) Citeşte mai mult
Manual Whirlpool FFT M11 82B EE R Uscător

Produse asemanatoare

Categorii relevante

×
Download