Manual Worx WG284E.9 Trimmer de gard viu

Ai nevoie de un manual pentru Worx WG284E.9 Trimmer de gard viu? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 4 întrebări frecvente, 1 comentariu și are 1 vot cu o evaluare medie a produsului de 0/100. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

Hedge trimmer EN
7
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
Descărcaţi manualul în limba română (PDF, 7.05 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Worx WG284E.9 Trimmer de gard viu, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Worx WG284E.9 Trimmer de gard viu?
Da Nu
0%
100%
1 vot

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Worx WG284E.9 Trimmer de gard viu. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

marant jp 17-07-2025
Motorul HS puțin servit

răspuns | A fost util (0) (Tradus de Google)

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Worx WG284E.9 Trimmer de gard viu. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Worx. S-ar putea să ofere un manual original. Căutați manualul dvs. Worx WG284E.9 Trimmer de gard viu într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Worx
Model WG284E.9
Categorie Trimmere de gard viu
Tip fișier PDF
Mărime fișier 7.05 MB

Toate manualele pentru Worx Trimmere de gard viu
Mai multe manuale pentru Trimmere de gard viu

Întrebări frecvente despre Worx WG284E.9 Trimmer de gard viu

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

De unde știu că gardianul meu este contondent? Verificat

Atunci când ramurile sunt trase în loc să fie tăiate, garda-gardă este ascuțită și trebuie ascuțită.

A fost util (345) Citeşte mai mult

Cum îmi ascuți lamele de tăiat gard viu? Verificat

Ascuțirea lamelor tăietorului gard viu este importantă pentru menținerea performanței și eficienței instrumentului. Pentru a ascuți lamele, veți avea nevoie de o pilă sau o piatră de ascuțit special concepută pentru tipul de lamă de pe tăietorul de gard viu.

A fost util (299) Citeşte mai mult

Cum îmi ung lamele tăietorului gard viu? Verificat

Lubrifierea lamelor tăietorului gard viu va ajuta la reducerea frecării și uzurii, prelungind durata de viață a sculei. Utilizați un ulei lubrifiant de înaltă calitate special conceput pentru tăietorii gard viu și aplicați o cantitate mică pe lame după fiecare utilizare.

A fost util (147) Citeşte mai mult

Cum pot preveni formarea ruginii pe lamele mele de tăiat gard viu? Verificat

Rugina poate cauza deteriorarea lamelor tăietorului gard viu, reducându-le performanța și durata de viață. Pentru a preveni rugina, curățați și uscați bine lamele după fiecare utilizare și depozitați-le într-un loc uscat și curat. De asemenea, puteți lua în considerare aplicarea unui strat de protecție, cum ar fi ulei sau un inhibitor de rugină, pe lame înainte de a le depozita.

A fost util (90) Citeşte mai mult
Manual Worx WG284E.9 Trimmer de gard viu

Produse asemanatoare

Categorii relevante

×
Download