Manual Zanussi ZHC906XM Hotă

Manual

2

www.zanussi.com

Recommendations

and suggestions

• The Instructions for Use apply

to several versions of this appli-

ance. Accordingly, you may nd

descriptions of individual features

that do not apply to your specic

appliance.

• The manufacturer will not be

held liable for any damages re-

sulting from incorrect or improper

installation.

• The minimum safety distance

between the cooker top and the

extractor hood is 650 mm (some

models can be installed at a lower

height, please refer to the para-

graphs on working dimensions

and installation).

• Check that the mains voltage

corresponds to that indicated on

the rating plate xed to the inside

of the hood.

• For Class I appliances, check

that the domestic power supply

guarantees adequate earthing.

Connect the extractor to the

exhaust ue through a pipe of

minimum diameter 120 mm. The

route of the ue must be as short

as possible.

• Do not connect the extractor

hood to exhaust ducts carrying

combustion fumes (boilers, re-

places, etc.).

• If the extractor is used in conjunc-

tion with non-electrical appliances

(e.g. gas burning appliances), a

sufcient degree of aeration must

be guaranteed in the room in

order to prevent the backow of

exhaust gas. The kitchen must

have an opening communicating

directly with the open air in order

to guarantee the entry of clean air.

When the cooker hood is used

in conjunction with appliances

supplied with energy other than

electric, the negative pressure in

the room must not exceed 0,04

mbar to prevent fumes being

drawn back into the room by the

cooker hood.

• The air must not be discharged

into a ue that is used for ex-

hausting fumes from appliances

burning gas or other fuels (not

applicable to appliances that

only discharge the air back into

the room).

• In the event of damage to the

power cable, it must be replaced

by the manufacturer or by the

technical service department, in

order to prevent any risks.

• If the instructions for installation

for the gas hob specify a greater

distance specied above, this has

to be taken into account. Regu-

lations concerning the discharge

of air have to be fullled.

• Use only screws and small parts

in support of the hood.

Warning: Failure to install the

screws or xing device in ac-

cordance with these instructions

may result in electrical hazards.

• Connect the hood to the mains

through a two-pole switch having

a contact gap of at least 3 mm.

Use

• The extractor hood has been

designed exclusively for domestic

use to eliminate kitchen smells.

EN

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Zanussi ZHC906XM Hotă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Zanussi. S-ar putea să ofere un manual original. Căutați manualul dvs. Zanussi ZHC906XM Hotă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Zanussi Hote
Mai multe manuale pentru Hote

Întrebări frecvente despre Zanussi ZHC906XM Hotă

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.