Manual AEG X92384MI01 Hotă

Ai nevoie de un manual pentru AEG X92384MI01 Hotă? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 3 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

4
www.aeg.com
4. CONTROLS
AB CD FE
A: Hood Functions On/Off.
When the button is touched with the hood
turned off, all functions light up (intensity
50%) and are enabled.
When the button is touched with the hood
in operation, all functions are turned off and
disabled (Motor Off + Lights Off).
B: Manages motor speed:
0-V1-V2-V3-V4-P.
When the area is touched, the motor starts
at the speed required.
P = Intensive Speed, timed for 5 minutes,
after which the system returns to the
previous speed.
When activated from Motor Off it returns
to speed V1.When the required speed is
touched, it will become brighter (intensity
100%) than the other functions (intensity 50%).
C: Delay function.
Touching this button activates automatic
shutdown of the Motor, the Fans and the
Lighting with a 10 minute delay. It can only
be activated with the motor on, running at
any speed except Intensive, and with the
Sensor = Off.
Enables / Disables the Remote Control
Receiver.
When this button is pressed and held for
4 seconds (Motor Off + Lights Off, in the
absence of other alarms, the Led will light
up for:
4 seconds to indicate that the Remote
Control has been Activated
2 seconds to indicate that the Remote
Control has been Deactivated.
D: Sensor.
In this mode the Hood operates
automatically for a maximum of 5 hours,
after which it switches the Motor off. The
hood modies the speed of the motor
according to the ndings of the sensor.
Buttons B and C do not work. The function
is disabled by pressing the Button or turning
the hood off.
E: Manages Lighting Intensity:
0-L1-L2-L3-LMax.
When this area is touched, the Lights turn on
at the required intensity. When the lighting
intensity is touched, it will become brighter
(intensity 100%) than the other functions
(intensity 50%).
F: Filter ResetResets the Filter
Saturation alarm when the
button is touched with the motor
and lighting turned off.
After 100 hours operation the Led lights
up continuously to indicate saturation of
the Metal Grease Filters. After 200 hours
operation the Led ashes to indicate
saturation of the Activated Charcoal Filters.
Enables/Disables the Activated Charcoal
Filter Alarm.
When this button is pressed and held for
4 seconds(Motor Off + Lights Off), in the
absence of other alarms, the Led will light
up for:
4 seconds to indicate the Activated Charcoal
Filter Alarm has been activated
2 seconds to indicate the Activated Charcoal
Filter Alarm has been deactivated.
After connecting the hood to the mains, the
commands are activated after 4seconds.
When the Hood is switched off, none of the
functions is displayed, and only the normal
lettering on the control panel is visible.
All the rest will light up (intensity 50%) when
button A is touched.
The controls are activated by touching the
selected function, which will light up more
brightly (intensity 100%) with respect to
the other hood functions (intensity 50%).
When no commands are given for at least
10 seconds, only the selected functions will
be lighted (Intensity 100%) and all the rest
will turn off (Intensity 50%). After 7 hours in
operation, if no further commands are given
the hood will switch off (Motor Off + Lights
Off), from here you can touch for activated
the function, and the next touch you can
select the desired function.It is possible to
activate one of the hood functions (Speed
and Lighting) not just by touching the control
panel, but also by placing a nger on the
panel and sliding it towards the chosen
Descărcaţi manualul în limba română (PDF, 15.24 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre AEG X92384MI01 Hotă, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de AEG X92384MI01 Hotă?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre AEG X92384MI01 Hotă. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru AEG X92384MI01 Hotă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați AEG. S-ar putea să ofere un manual original. Căutați manualul dvs. AEG X92384MI01 Hotă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă AEG
Model X92384MI01
Categorie Hote
Tip fișier PDF
Mărime fișier 15.24 MB

Toate manualele pentru AEG Hote
Mai multe manuale pentru Hote

Întrebări frecvente despre AEG X92384MI01 Hotă

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Câtă distanță ar trebui să existe între hota mea și plita mea? Verificat

Acest lucru poate funcționa puțin în funcție de marcă, dar, în general, o hota aragazului trebuie plasată la cel puțin 65 de centimetri deasupra unei plite cu gaz și la cel puțin 50 de centimetri deasupra unei plite electrice sau cu inducție. Aceasta este pentru a îmbunătăți siguranța la incendiu

A fost util (1216) Citeşte mai mult

Am nevoie de o hota cu sau fara motor? Verificat

Hote de bucătărie cu motor sunt destinate atunci când aerul este mutat direct în exterior. O hota fara motor este destinata atunci cand exista un sistem central de ventilatie. Nu conectați niciodată o hota cu motor la un sistem de ventilație centrală!

A fost util (638) Citeşte mai mult

Cum pot curăța filtrele din hota AEG? Verificat

Filtrele din toate hotei AEG pot fi spălate manual. Unele modele au un filtru care poate fi spălat în mașina de spălat vase. Acest lucru poate fi găsit în manualul de utilizare. Asigurați-vă că filtrul este uscat atunci când este introdus înapoi în hota.

A fost util (208) Citeşte mai mult
Manual AEG X92384MI01 Hotă

Produse asemanatoare

Categorii relevante