Manual Bosch GWS 15-125 CIPX Professional Polizor unghiular

Manual

20 | English

Additional Safety Warnings specific for Abrasive Cutting

Off operations

u Do not “jam” the cut-off wheel or apply excessive

pressure. Do not attempt to make an excessive depth

of cut. Overstressing the wheel increases the loading

and susceptibility to twisting or binding of the wheel in

the cut and the possibility of kickback or wheel breakage.

u Do not position your body in line with and behind the

rotating wheel. When the wheel, at the point of opera-

tion, is moving away from your body, the possible kick-

back may propel the spinning wheel and the power tool

directly at you.

u When wheel is binding or when interrupting a cut for

any reason, switch off the power tool and hold the

power tool motionless until the wheel comes to a com-

plete stop. Never attempt to remove the cut-off wheel

from the cut while the wheel is in motion otherwise

kickback may occur. Investigate and take corrective ac-

tion to eliminate the cause of wheel binding.

u Do not restart the cutting operation in the workpiece.

Let the wheel reach full speed and carefully re-enter

the cut. The wheel may bind, walk up or kickback if the

power tool is restarted in the workpiece.

u Support panels or any oversized workpiece to minim-

ize the risk of wheel pinching and kickback. Large

workpieces tend to sag under their own weight. Supports

must be placed under the workpiece near the line of cut

and near the edge of the workpiece on both sides of the

wheel.

u Use extra caution when making a “pocket cut” into ex-

isting walls or other blind areas. The protruding wheel

may cut gas or water pipes, electrical wiring or objects

that can cause kickback.

Safety Warnings specific for Sanding operations

u Do not use excessively oversized sanding disc paper.

Follow manufacturers recommendations, when select-

ing sanding paper. Larger sanding paper extending bey-

ond the sanding pad presents a laceration hazard and

may cause snagging, tearing of the disc, or kickback.

Additional safety information

Wear safety goggles.

u Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age or may cause an electric shock.

u Do not touch grinding and cutting discs until they have

cooled down. The discs can become very hot while work-

ing.

u Release the On/Off switch and set it to the off position

when the power supply is interrupted, e. g., in case of

a power failure or when the mains plug is pulled. This

prevents uncontrolled restarting.

u Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for roughing metal, stone and

ceramic materials.

A special protective guard for cutting must be used when

cutting bonded abrasives.

Sufficient dust extraction must be provided when cutting

stone. Together with the hand guard (accessory), the power

tool can be used for sanding with elastic sanding pads.

The power tool is suitable only for working without water.

With approved abrasive tools, the power tool can be used for

sanding with sanding discs.

The power tool is not suitable for drilling tiles.

The power tool must not be used to grind concrete.

Product Features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

Unlocking lever for protective guard

(2)

Spindle lock button

(3)

On/off switch

(4)

Speedpreselectionthumbwheel

(GWS13-125CIEX/GWS12-125CIEPX/

GWS17-125CIEX/GWS15-125CIEPX)

(5)

Unlockinglever for on/offswitch

(GWS12-125CIPX/GWS12-125CIEPX/

GWS15-125CIPX/GWS15-125CIEPX)

(6)

Auxiliary handle (insulated gripping surface)

(7)

Extraction guard for grinding

A)

1 609 92A 5WT | (12.08.2020) Bosch Power Tools

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Bosch GWS 15-125 CIPX Professional Polizor unghiular. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Bosch. S-ar putea să ofere un manual original. Căutați manualul dvs. Bosch GWS 15-125 CIPX Professional Polizor unghiular într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Bosch Polizoare unghiulare
Mai multe manuale pentru Polizoare unghiulare

Întrebări frecvente despre Bosch GWS 15-125 CIPX Professional Polizor unghiular

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Bosch GWS 18V-10 SC Professional Polizor unghiular

Manual

Bosch GWS 13-125 CIE Professional Polizor unghiular

Manual

Bosch GWS 26-230 JH Professional Polizor unghiular

Manual

Bosch GWS 18-150 PL Professional Polizor unghiular

Manual

Bosch GWS 18 V-LI Professional Polizor unghiular

Manual

Bosch GWS 24-230 JVX Professional Polizor unghiular

Manual

Bosch GWS 15-125 CIP Professional Polizor unghiular

Manual

Bosch GWX 18V-15 C Polizor unghiular

Categorii relevante