Home > Grădină & Terasă > Trimmere de gazon > EGO Trimmere de gazon > EGO STA1500 Trimmer de gazon

Manual EGO STA1500 Trimmer de gazon

Ai nevoie de un manual pentru EGO STA1500 Trimmer de gazon? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 0 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

LINE TRIMMER ATTACHMENT — STA150010

USING THE LINE TRIMMER WITH POWER HEAD

WARNING: Dress properly to reduce the risk of

injury when operating this tool. Do not wear loose clothing

or jewelry. Wear eye and ear/hearing protection. Wear

heavy, long pants, boots and gloves. Do not wear short

pants or sandals or go barefoot.

WARNING: Clear the area to be cut before each use.

Remove all objects, such as rocks, broken glass, nails, wire,

or string that can be thrown or become entangled in the

cutting attachment. Clear the area of children, bystanders,

and pets. At a minimum, keep all children, bystanders

and pets at least 15m away; there still may be risk to

bystanders from thrown objects. Bystanders should be

encouraged to wear eye protection. If you are approached,

stop the motor and cutting attachment immediately.

For safe and better operation, put on the shoulder strap

across the shoulder. Adjust the shoulder strap in a

comfortable operating position. Hold the line trimmer with

your one hand on the rear handle and your other hand

on the front-assist handle. Keep a rm grip with both

hands while in operation. The line trimmer should be held

at a comfortable position with the rear handle about hip

height. The trimmer head should be parallel to the ground

such that it easily contacts the material to be cut without

the operator having to bend over (Fig. B).

WARNING: The shoulder strap is also a quick

release mechanism in hazardous situation. When

emergency occurs, take it off from your shoulder

immediately, no matter what way the strap is in.

After each use, clean the trimmer

See the MAINTENANCE section for cleaning instructions.

TO START/STOP THE TOOL

See “STARTING/STOPPING THE POWER HEAD” section

in the power head PH1400E operator’s manual.

ADJUSTING CUTTING LINE LENGTH

The trimmer head allows the operator to release more

cutting line without stopping the motor. As line becomes

frayed or worn, additional line can be released by lightly

tapping the trimmer head on the ground while operating

the trimmer (Fig. E).

NOTICE: Line release will become more difcult as the

cutting line becomes shorter.

WARNING: Do not remove or alter the line-cutting

blade assembly. Excessive line length will cause the motor

to overheat and may result in serious personal injury.

LINE REPLACEMENT

NOTICE:

Always use the recommended nylon cutting line

with a diameter that does not exceed 2.4 mm. Using line

other than that specied may cause the line trimmer to

overheat or become damaged.

WARNING: Never use metal-reinforced line, wire,

or rope, etc. These can break off and become dangerous

projectiles.

1. Remove the battery pack

2. Remove the remaining cutting line, if necessary.

Simply pull it out by hand.

3. Cut 4m long cutting line, Insert the line into the

mounting hole inside the eyelet (Fig. F). Push and pull

the line from the other side until equal amounts of

line appear on both sides of the spool.

4. Press, while rotating the lower cover assembly in the

arrow direction, to wind the line onto the spool until

approximately 14cm of line is showing on each side

(Fig. G).

5. Push the lower cover assembly down while pulling on

the lines to manually advance the line and to check

for proper assembly of the trimmer head.

When the cutting line breaks from the line outlet or the

cutting line is not released when tapping the trimmer

head, follow the steps below:

1. Remove the battery pack.

2. Press the release tabs on the upper cover and remove

the lower cover assembly by pulling it straight out (Fig.

H& I).

3. Remove the cutting line from the spool.

4. With one hand holding the Upper cover, use the other

hand to grasp the lower cover assembly and align the

tabs on the upper cover with the holes lower cover

assembly base (Fig. J); use your palm to press and

rotate the lower cover assembly left and right until

the tabs lock with the upper cover (Fig. K).

5. Following the instructions in “LINE REPLACEMENT” to

reload the cutting line.

When the tool is intended to use as a brush cutter, follow

the steps as Fig. L & M shown to disassemble the trimmer

head.

MAINTENANCE

WARNING: Before inspecting, cleaning or servicing

the unit, stop the motor, wait for all moving parts to stop,

and remove the battery pack. Failure to follow these

instructions can result in serious personal injury or

property damage.

Evaluare

Spuneți-ne ce părere aveți despre EGO STA1500 Trimmer de gazon, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.

Ești mulțumit de EGO STA1500 Trimmer de gazon?
Da Nu

Fiți primul care evaluează acest produs

0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre EGO STA1500 Trimmer de gazon. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru EGO STA1500 Trimmer de gazon. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați EGO. S-ar putea să ofere un manual original. Căutați manualul dvs. EGO STA1500 Trimmer de gazon într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.