Manual FERM JSM1034 Ferăstrău vertical

Manual

6

EN

b) 

designated battery packs. Use of any other



c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may



d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.



water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

e) Do not use a battery pack or tool that is

 

batteries may exhibit unpredictable behaviour



f) Do not expose a battery pack or tool to

 Exposure to







g) Follow all charging instructions and do not

charge the battery pack or tool outside



instructions. Charging improperly or at





6) Service

a) Have your power tool serviced by a



replacement parts. This will ensure that the

safety of the power tool is maintained.

b) Never service damaged battery packs.

Service of battery packs should only be

performed by the manufacturer or authorized

service providers.

SAFETY WARNINGS FOR JIG SAWS

• Hold the power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live”

and could give the operator an electric shock.

• Keep hands away from the sawing range.

Do not reach under the workpiece. Contact

with the saw blade can lead to injuries.

• Apply the machine to the workpiece only

when switched on. Otherwise there is danger

of kickback when the cutting tool jams in the

workpiece.

• Pay attention that the base plate rests

securely on the material while sawing.

A jammed saw blade can break or lead to

kickback.

• When the cut is completed, switch off the

machine and then pull the saw blade out of

the cut only after it has come to a standstill.

In this manner you can avoid kickback and can

place down the machine securely.

• Use only undamaged saw blades that are

in perfect condition. Bent or dull saw blades

can break, negatively influence the cut, or lead

to kickback.

• Do not brake the saw blade to a stop by

applying side pressure after switching off.

The saw blade can be damaged, break or

cause kickback.

• Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assistance.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes

property damage.

• Use clamps or another practical way to

secure and support the workpiece to a

stable platform. Holding the workpiece by

hand or against your body leaves it unstable

and may lead to loss of control.

• Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

2. MACHINE INFORMATION

Intended use

The machine is intended for sawing wood, metal,

plastics, ceramics, rubber, etc. to any required

size and in any required shape, while keeping

the baseplate resting firmly on the workpiece.

A suitable saw blade must always be used.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru FERM JSM1034 Ferăstrău vertical. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați FERM. S-ar putea să ofere un manual original. Căutați manualul dvs. FERM JSM1034 Ferăstrău vertical într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru FERM Ferăstraie verticale
Mai multe manuale pentru Ferăstraie verticale

Întrebări frecvente despre FERM JSM1034 Ferăstrău vertical

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

FERM JSM1023 Ferăstrău vertical

Manual

FERM JSM1014 Ferăstrău vertical

Manual

FERM JSM1028P Ferăstrău vertical

Manual

FERM JSM1017 Ferăstrău vertical

Manual

FERM JSM1025P Ferăstrău vertical

Manual

Parkside IAN 304804 Ferăstrău vertical

Manual

Parkside IAN 270762 Ferăstrău vertical

Manual

Parkside IAN 289281 Ferăstrău vertical

Categorii relevante