Manual Hama 00012086 3in1 Telecomandă

Manual

6

7

Universal Remote Control

Function buttons

1. LED display

2. Power: ON/OFF

3. Device selection buttons

(TV, DVD, STB)

4. Setup

5. VOL+/VOL–:Volume control

6. Text ON:Switch on TeletextMenu:Open

device menu

7. Hold:Hold the current Teletext page

8. Number keys 0-9

9. AV:Switch to an external device

10. E Rewind / red

B Play / yellow

F Fast forward / blue

I Start recording

Stop / green

J Pause / magenta

11. -/--: Switch to two-digit channel

numbers

12. Info: Information about the station

(depending on device)

EPG: Display Electronic Programme Guide

(depending on device)

13. Text OFF: Switch off Teletext

EXIT: Exit device menu

14. P+/P–:Programme selection

15. H Mute switch

OK: Confirm your entry

16. Shift: For the blue function buttons, e.g.

OK When the Shift button is pressed, the

LED is illuminated. The Shift function is

then active for approx. 30 seconds and

automatically switches off again.

Alternatively, it can be switched off at any

time by pressing the Shift key again.

General

This universal remote control is one 3 in 1

remote control and can operate following

device types: TV, DVD, STB. (e.g. DVD-

recorder/Player,

video recorders, boosters, tuners, etc.).

The lettering of the keys does not describe

the device type to be programmed, it is used

therefore only for the easier overview.

Note down please the codes of your devices

which you used for the programming. If the

codes should be e.g. to a battery change no

more not stored, you can program the remote

control so more quickly.

They must program a four-digit device code

to a source key (TV, DVD, STB) for every

device which you

would like to operate with the universal

remote control.

Video recorder: for the code search please

inserted a tape.

Programming device codes

Entering device code after code set

The codes of the corresponding devices are

the code list, to take that is enclosed in this

operating manual.

• Turn on the device manually.

• Hold the key setup (4) pressed for approx.

3 seconds until the red LED (1) lights up

permanently.

• Press the source key (3) (TV, DVD, STB)

shortly.

• You distribute the corresponding four-digit

code then the code table one.

• To the confi rmation of every keystroke the

red LED (1) goes out shortly.

• If the code input was valid, the red LED (1)

goes out according to the input of the last

place.

• Press SHIFT (16) briefl y and then OK (15) to

save the code. The LED (1) briefl y goes out.

• Briefl y press the Shift (16) key.

• An invalid code was entered, the red

LED (1) fl ashes for three seconds before it

goes out. Should the device not reacts;

you repeat the programming where

appropriate with another code. Please try

out all codes indicated for your brand.

• Select the code which all available

commands of your remote control react to

correctly.

• You should not have also any success in

this way, then you attempt it with that one

„search run automatic in the chapter“

described search method.

Manual code search run

• Turn on the device manually.

• Hold the key setup (4) pressed for approx.

3 seconds until the red LED lights up

permanently.

• Press the source key (3) (TV, DVD, STB)

shortly.

• You press repeatedly the key POWER (2)

after each other (this can be up to 350

times), only at VCR (Video recorders) asks

the key P+ (14) or P- (14)

• to the device that is supposed to be

operated, off, or changes the channel or

reacts correspondingly. The code-search

is begun with the code number currently

stored on the cluster.

• Press SHIFT (16) briefl y and then OK (15) to

save the code. The LED (1) briefl y goes out.

• Briefl y press the Shift (16) key.

• Due to the extensive number of different

possible codes, up to 350 possible codes

are preset per device type. In individual

cases, it may be possible that only the most

common main functions are available. The

procedure described may be unsuccessful

for some special device models.

Automatic search run

If your device does not respond to the remote

control although you tried out all codes

performed for your device type and the

corresponding brand, you attempt it with the

automatic search run. Through that you

can fi nd also such codes of such brands

which are not performed in the device code

list.

• Turn on the device manually

• Hold the key setup (4) pressed for approx.

3 seconds until the red LED (1) lights up

permanently.

• Press the source key (3) (TV, DVD, STB)

shortly.

• Focus the remote control on the device

and press the key P+ (14) once shortly.

• If the device does not have any

program-function, you press the key

POWER (2) instead of the P+ (14).

• The remote control starts the code

search after 6 seconds and sends in the

1 second’s clock pulse (see also next

section) after each other all codes. At

every sending the red LED lights up.

• As soon as the device responds to the

remote control, press SHIFT (16) and then

OK (15). Briefl y press the Shift (16) key. If

you do not press OK in time, press PROG-

(14) to return step-by-step to the code

where the device responded.

• To stop searching, press SHIFT (16) and

then EXIT (13).

• Briefl y press the Shift (16) key.

When the remote control instead of 1 only

every 3 seconds a new code is supposed to

send, you go on as follows.

You press within 6 seconds according

to pressures of the key P+ (14) (and/or

POWER (2)) how in before described, the

key P+ (14) or P- (14) still once. The remote

control sends now a new code only every 3

seconds. Through that you win more time in

order to abort the process, however, the code

search through that lasts also longer.

g Operating Instructions

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Hama 00012086 3in1 Telecomandă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Hama. S-ar putea să ofere un manual original. Căutați manualul dvs. Hama 00012086 3in1 Telecomandă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Hama Telecomenzi
Mai multe manuale pentru Telecomenzi

Întrebări frecvente despre Hama 00012086 3in1 Telecomandă

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Hama 00012306 4in1 Telecomandă

Manual

Hama 00040072 Big Zapper Telecomandă

Manual

Hama 00040074 6in1 Telecomandă

Manual

Hama 00011413 8in1 Telecomandă

Manual

Hama 00012307 8in1 Telecomandă

Manual

Hama 00011412 4in1 Telecomandă

Manual

SilverCrest IAN 93436 Telecomandă

Manual

LTC RC-701 Telecomandă

Categorii relevante