Manual Hama 00186381 Ceas cu alarmă

Manual

3

Warning – Batteries

• Do not throw batteries in a re.

• Keep batteries out of the reach of children.

• Never open, damage or swallow batteries or allow

them to enter the environment. They can contain toxic,

environmentally harmful heavy metals.

• Immediately remove and dispose of dead batteries from

the product.

• Avoid storing, charging or using the device in extreme

temperatures and extremely low atmospheric pressure (for

example, at high altitudes).

4. Getting Started

Warning

• Connect the product only to a socket that has been approved

for the device. The socket must be installed close to the

product and must be easily accessible.

• Disconnect the product from the network using the power

button – if this is not available, unplug the power cord from

the socket.

• When using a multi-socket power strip, make sure that the

sum power draw of all the connected devices does not exceed

its maximum throughput rating.

• If you will not be using the product for a long period of time,

disconnect it from mains power.

4.1. Inserting the batteries / connecting the power supply

• Connect the power supply unit to the power supply unit

connection socket (13) on the back of the radio-controlled

alarm clock.

• Connect the power cable of the radio-controlled alarm clock to a

properly installed socket.

• The radio-controlled alarm clock switches on automatically.

• Alternatively, open the battery compartment (14), insert three

AAA batteries with the correct polarity and close the battery

compartment cover.

Note

• If the batteries are inserted correctly and you connect the

power supply unit to the alarm clock, the radio-controlled

alarm clock will automatically switch to the external power

supply.

4.2. Replacing the batteries

• Open the battery compartment on the back of the product.

• Remove and dispose of any used batteries. Insert three

new batteries (AAA). Ensure that the polarity of the battery

corresponds to the symbols in the battery compartment.

• Close the battery compartment.

5. Operation

Note

• Hold the + button (15) or the - button (16) to select the

values faster.

5.1. Basic and manual settings

Automatic setting using the DCF signal

After inserting the batteries or connecting the power supply unit,

the radio-controlled alarm clock will automatically start the search

for the DCF signal. During the search, the radio icon (9) flashes.

Display Search for the DCF signal

Flashing display

Active

Display steady (not

flashing

Successful –

signal is being received

No display Inactive

If the station still does not receive a signal, press and hold the -

button (16) for approx. 3 seconds to start the manual search for the

DCF signal. The radio icon (9) starts to ash.

Note – Time settings

• The search process takes around 7 minutes. If the search

fails, it ends and is repeated at the next full hour. The radio

icon (9) goes out.

• In the meantime, however, you can set the time and the

date manually.

• The clock automatically continues to search for the DCF signal

on a daily basis (between 1 am and 5 am) to correct any

deviations. If the signal is received successfully, the manually

set time and date are overwritten.

• Press and hold the - button (16) again for approx. 3 seconds to

stop the manual search for the DCF radio signal.

Manual settings

• Press and hold the - button (16) for approx. 3 seconds to stop

the search for the DCF signal. The radio icon (9) goes out and

you can set the time manually.

• Press and hold the SET button (19) for approximately 3 seconds

to make the following settings one after the other: Language,

button tone, time zone, hour, minute, year, month, day,

temperature in °C/°F and snooze function

• To select the individual values, press the + button (15) or

the - button (16), and conrm each selection by pressing the

SET button (19).

• Press the SET button (19) to adopt the set value displayed

and to skip.

• If you do not make an entry for 20 seconds, Settings mode is

exited automatically.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Hama 00186381 Ceas cu alarmă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Hama. S-ar putea să ofere un manual original. Căutați manualul dvs. Hama 00186381 Ceas cu alarmă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Hama Ceasuri cu alarmă
Mai multe manuale pentru Ceasuri cu alarmă

Produse asemanatoare

Manual

Hama 00186321 RC660 Ceas cu alarmă

Manual

Hama 00186320 RC 550 Ceas cu alarmă

Manual

Hama 00186331 RC200 Ceas cu alarmă

Manual

Hama 00186352 Jumbo Ceas cu alarmă

Manual

Hama 00186372 RC45 Ceas cu alarmă

Manual

Hama 00186305 Cube Ceas cu alarmă

Manual

Hama 00186324 Retro Ceas cu alarmă

Manual

Hama 00186431 Ceas cu alarmă

Categorii relevante