Manual Hikoki CJ 18DSL Ferăstrău vertical

Manual

3

English

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease.

Slippery handles and grasping surfaces do not

allow for safe handling and control of the tool in

unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specifi ed by the

manufacturer.

A charger that is suitable for one type of battery pack

may create a risk of fi re when used with another

battery pack.

b) Use power tools only with specifi cally

designated battery packs.

Use of any other battery packs may create a risk of

injury and fi re.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause

burns or a fi re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, fl ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

e) Do not use a battery pack or tool that is damaged

or modifi ed.

Damaged or modifi ed batteries may exhibit

unpredictable behaviour resulting in fi re, explosion

or risk of injury.

f) Do not expose a battery pack or tool to fi re or

excessive temperature.

Exposure to fi re or temperature above 130 °C may

cause explosion.

g) Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specifi ed in the instructions.

Charging improperly or at temperatures outside

the specifi ed range may damage the battery and

increase the risk of fi re.

6) Service

a) Have your power tool serviced by a qualifi ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

b) Never service damaged battery packs.

Service of battery packs should only be performed

by the manufacturer or authorized service providers.

PRECAUTION

Keep children and infi rm persons away.

When not in use, tools should be stored out of reach of

children and infi rm persons.

CORDLESS JIG SAW SAFETY

WARNINGS

1. Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a "live" wire may make exposed

metal parts of the power tool "live" and could give the

operator an electric shock.

2. Use clamps or another practical way to secure and

support the workpiece to a stable platform.

Holding the workpiece by hand or against your body

leaves it unstable and may lead to loss of control.

ADDITIONAL SAFETY WARNINGS

1. Always charge the battery at a temperature of 0 oC –

40 oC. A temperature of less than 0 oC will result in over

charging which is dangerous. The battery cannot be

charged at a temperature higher than 40o C.

The most suitable temperature for charging is that of

20 oC – 25 oC.

2. Do not use the charger continuously.

When one charging is completed, leave the charger for

about 15 minutes before the next charging of battery.

3. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

4. Never disassemble the rechargeable battery and

charger.

5. Never short-circuit the rechargeable battery.

Shortcircuiting the battery will cause a great electric

current and overheat. It results in burn or damage to the

battery.

6. Do not dispose of the battery in fi re. If the battery is burnt,

it may explode.

7. Do not insert object into the air ventilation slots of the

charger. Inserting metal objects or infl ammables into the

charger air ventilation slots will result in electrical shock

hazard or damaged charger.

8. Bring the battery to the shop from which it was purchased

as soon as the post-charging battery life becomes too

short for practical use. Do not dispose of the exhausted

battery.

9. If the machine is used continuously at low speed, an

extra load is applied to the motor which can result in

motor seizure. Always operate the power tool so that

the blade is not caught by the material during operation.

Always adjust the blade speed to enable smooth cutting.

10. Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than

by hand.

11. Preparing and checking the work environment. Make

sure that the work site meets all the conditions laid forth

in the precautions.

12. Make sure that the battery is installed fi rmly. If it is at all

loose it could come off and cause an accident.

13. Dust produced in operation

The dust produced in normal operation may aff ect

the operator’s health. Either of following way is

recommended.

a) Wear a dust mask

b) Use external dust collection equipment

When using the external dust collection equipment,

connect the adapter with the hose from external dust

collection equipment.

14. Changing blades

○ Be sure to switch power OFF and disconnect the battery

from the body when changing blades.

○ Do not open the lever when plunger is moving. (Fig. 3)

○ Confi rm the protrusions of blade inserted to the blade

holder surely. (Fig. 3)

○ Confi rm the blade located between the groove of roller.

(Fig. 3)

15. Always make sure to push in the lock off button to the

locked position when not using.

16 Do not look directly into the light from the LED lamp.

Continuous and direct exposure to the light from the LED

lamp can injure your eyes.

17. Using the splinter guard when cutting wood materials will

reduce splintering of cut surfaces.

Insert the splinter guard in the space on the base, and

push it completely.

0000Book̲CJ18DSL.indb30000Book̲CJ18DSL.indb3 2019/07/2518:54:362019/07/2518:54:36

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Hikoki CJ 18DSL Ferăstrău vertical. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Hikoki. S-ar putea să ofere un manual original. Căutați manualul dvs. Hikoki CJ 18DSL Ferăstrău vertical într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Hikoki Ferăstraie verticale
Mai multe manuale pentru Ferăstraie verticale

Întrebări frecvente despre Hikoki CJ 18DSL Ferăstrău vertical

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Hikoki CJ 36DB Ferăstrău vertical

Manual

Hikoki CJ 18DA Ferăstrău vertical

Manual

Hikoki CJ 110MV Ferăstrău vertical

Manual

Hikoki CJ 65V3 Ferăstrău vertical

Manual

Bosch PST 750 PEL Ferăstrău vertical

Manual

Pattfield PE-550ST Ferăstrău vertical

Manual

Skil 3440 JA Ferăstrău vertical

Manual

Evotools JS 600 Ferăstrău vertical

Categorii relevante