Manual Hitachi 24HE2101 Televizor LED

Manual

English - 9 -

USB Connection

You can connect USB devices to your TV by using

the USB inputs of the TV. This feature allows you to

display/play JPG, MP3 and video les stored in a USB

stick. It is possible that certain types of USB devices

(e.g. MP3 Players) may not be compatible with this

TV. You should back up your les before making

any connections to the TV set in order to avoid any

possible data loss. Note that manufacturer will not be

responsible for any le damage or data loss. Do not

pull out USB module while playing a le.

CAUTION: Quickly plugging and unplugging USB

devices, is a very hazardous operation. Especially,

do not repeatedly quickly plug and unplug the drive.

This may cause physical damage to the USB player

and especially the USB device itself.

Installing the Batteries to the Remote

Lift the cover on the back of the remote gently. Insert

two AAA batteries. Make sure the (+) and (-) signs

match (observe correct polarity). Place the cover back

on. Remote range is approximately 7m/23ft.

Environmental Information

This television is designed to be environment friendly.

To reduce energy consumption, you can follow these

steps:

If you set the Energy Saving to Minimum, Medium,

Maximum or Auto the TV will reduce the energy

consumption accordingly. If you like to set the

Backlight to a xed value set as Custom and adjust

the Backlight (located under the Energy Saving

setting) manually using Left or Right buttons on the

remote. Set as Off to turn this setting off.

Note: Available Energy Saving options may

differ depending on the selected Mode in the

System>Picture menu.

The Energy Saving settings can be found in the

System>Picture menu. Note that some picture

settings will be unavailable to be changed.

If pressed Right button while Auto option is selected or

Left button while Custom option is selected, “Screen

will be off in 15 seconds.” message will be displayed

on the screen. Select Proceed and press OK to turn

the screen off immediately. If you don’t press any

button, the screen will be off in 15 seconds. Press

any button on the remote or on the TV to turn the

screen on again.

Note: Screen Off option is not available if the Mode

is set to Game.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

Standby Notications

If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “TV switched to stand-by

mode automatically because there was no signal

for a long time.” Press OK to continue.

If the TV is on and it isn’t being operated for a while

it will go into standby. When you next switch-on, the

following message will be displayed. “TV switched to

stand-by mode automatically because no operation

was made for a long time.” Press OK to continue.

Switching On/Off (depending on the model)

To Switch the TV On

• Connect the power cord to the 220-240V AC, 50 Hz.

• Then the standby LED lights up.

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

Control buttons on the TV (depending on model)

• Press the Standby button or Programme +/- button

on the TV. The TV will then switch on.

-or-

• Press and hold the middle of the control switch on

the left side of the TV until the TV comes on from

standby. The TV will then switch on.

-or-

• Press the centre of the joystick on the TV in or push

it up/down until the TV comes on from standby.

To Switch the TV Off (depending on model)

• Press the Standby button on the remote control or

press the Standby button on the TV or press and

hold the control switch on the TV until shut down,

so the TV switches into standby mode (depends on

the model).

• Press the Standby button on the remote control or

press the centre of the joystick on the TV in and

hold it down for a few seconds, the TV will switch

into standby mode.

• To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode,

standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active.

The LED can also blink when you switch on the TV from

standby mode.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Hitachi 24HE2101 Televizor LED. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Hitachi. S-ar putea să ofere un manual original. Căutați manualul dvs. Hitachi 24HE2101 Televizor LED într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Hitachi Televizoare LED
Mai multe manuale pentru Televizoare LED

Întrebări frecvente despre Hitachi 24HE2101 Televizor LED

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Hitachi 32HE3300 Televizor LED

Manual

Hitachi 58HK5600 Televizor LED

Manual

Hitachi 24HE2200 Televizor LED

Manual

Hitachi 24HE2201 Televizor LED

Manual

Hitachi 43HBL7300 Televizor LED

Manual

Hitachi 24HE2203 Televizor LED

Manual

Hitachi 24HE2003 Televizor LED

Manual

Hitachi 50HK5600 Televizor LED

Categorii relevante