Manual Hitachi DS 14DBEL Maşină de găurit-înşurubat

Manual

7

English

4. Cleaning on the outside

When the driver drill is stained, wipe with a soft dry cloth

or a cloth moistened with soapy water. Do not use chloric

solvents, gasoline or paint thinner, for they melt plastics.

5. Storage

Store the driver drill in a place in which the temperature

is less than 40°C and out of reach of children.

NOTE

Make sure that the battery is fully charged when stored

for a long period (3 months or more). The battery with

smaller capacity may not be able to be charged when

used, if stored for a long period.

NOTE

Storing lithium-ion batteries.

Make sure the lithium-ion batteries have been fully

charged before storing them.

Prolonged storage of batteries with a low charge

may result in performance deterioration, signifi cantly

reducing battery usage time or rendering the batteries

incapable of holding a charge.

However, signifi cantly reduced battery usage time may

be recovered by repeatedly charging and using the

batteries two to fi ve times.

If the battery usage time is extremely short despite

repeated charging and use, consider the batteries dead

and purchase new batteries.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

Important notice on the batteries for the Hitachi

cordless power tools

Please always use one of our designated genuine

batteries. We cannot guarantee the safety and

performance of our cordless power tool when used with

batteries other than these designated by us, or when

the battery is disassembled and modifi ed (such as

disassembly and replacement of cells or other internal

parts).

GUARANTEE

We guarantee Hitachi Power Tools in accordance with

statutory/country specifi c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a Hitachi Authorized Service Center.

Information concerning airborne noise and vibration

The measured values were determined according to

EN60745 and declared in accordance with ISO 4871.

Measured A-weighted sound power level:

86 dB (A) (DS14DBEL)

87 dB (A) (DS18DBEL)

92 dB (A) (DV14DBEL)

92 dB (A) (DV18DBEL)

Measured A-weighted sound pressure level:

75 dB (A) (DS14DBEL)

76 dB (A) (DS18DBEL)

81 dB (A) (DV14DBEL)

81 dB (A) (DV18DBEL)

Uncertainty K: 3 dB (A).

Wear hearing protection.

Vibration total values (triax vector sum) determined

according to EN60745.

Drilling into metal:

Vibration emission value

a

h,

D < 2.5 m/s

2

(DS14DBEL, DS18DBEL)

Uncertainty K = 1.5 m/s

2

Impact drilling into concrete:

Vibration emission value

a

h,

ID =

11.1 m/s

2

(DV14DBEL)

10.8 m/s

2

(DV18DBEL)

Uncertainty K = 1.5 m/s

2

The declared vibration total value has been measured in

accordance with a standard test method and may be used

for comparing one tool with another.

It may also be used in a preliminary assessment of exposure.

WARNING

○ The vibration emission during actual use of the power

tool can diff er from the declared total value depending in

the ways in which the tool is used.

○ Identify safety measures to protect the operator that

are based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is

switched off and when it is running idle in addition to the

trigger time).

NOTE

Due to HITACHI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

0000Book̲DS14DBEL.indb70000Book̲DS14DBEL.indb7 2014/10/149:51:112014/10/149:51:11

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Hitachi DS 14DBEL Maşină de găurit-înşurubat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Hitachi. S-ar putea să ofere un manual original. Căutați manualul dvs. Hitachi DS 14DBEL Maşină de găurit-înşurubat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Hitachi Maşini de găurit-înşurubat
Mai multe manuale pentru Maşini de găurit-înşurubat

Întrebări frecvente despre Hitachi DS 14DBEL Maşină de găurit-înşurubat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Hitachi DS 12DVFA Maşină de găurit-înşurubat

Manual

Hitachi DS 10DAL Maşină de găurit-înşurubat

Manual

Skil 3018 RC Maşină de găurit-înşurubat

Manual

Skil 3018 CA Maşină de găurit-înşurubat

Manual

Skil 3070 FA Maşină de găurit-înşurubat

Manual

Skil 3010 EA Maşină de găurit-înşurubat

Manual

Skil 3021 CA Maşină de găurit-înşurubat

Manual

Parkside IAN 356349 Maşină de găurit-înşurubat

Categorii relevante