Manual Maestro MR312C Fier de călcat

Manual

4 5

Safety instructions

When using your appliance, basic safety precautions should always be followed,

including the following:

SPECIAL INSTRUCTIONS

Warning!

NEVER immerse the iron, cable or plug in any liquid.

NEVER touch the appliance with wet or damp hands.

ALWAYS disconnect iron from electrical outlet when lling with water or emptying and when

not in use.

Otherwise, there is a risk to get an electric shock!

DO NOT let children or untrained persons use the appliance without supervision.

DO NOT leave the hot iron touching fabrics or very inammable surfaces.

DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from the mains

when the appliance is not being used.

DO NOT use the power cord or the appliance in order to pull the plug out of the socket.

DO NOT leave the appliance exposed to the weather (rain, sun, etc. ).

DO NOT leave the iron without supervision when it is connected to the power supply.

INSTRUCTIONS BEFORE USING

- Use iron only for its intended use.

- To protect against a risk of electric shock, do not immerse the iron in water or other

liquids.

- The iron should always be turned to ‘ Off ’ before plugging or unplugging from outlet.

Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.

- Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.

Loop cord loosely around iron when storing.

- Do not operate iron with a damaged cord or if the iron has been dropped or damaged.

To avoid the risk of electric shock, do not disassemble the iron take it to a qualied

serviceman for examination and repair. Incorrect reassembly can cause a risk of electric

shock when the iron is used.

- Close supervision is necessary for any appliance being used by or near children. Do not

leave iron unattended while connected or on an ironing board.

- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when

you turn a steam iron upside down - there may be hot water in the reservoir.

- Do not use it for commercial purpose.

Please note! Do not use chemical additive, scented substances or decalciers. Failure to

comply with the above-mentioned regulations leads to the loss of guarantee.

Operation

BEFORE STARTUP

Before the rst use remove a protective lm (at presence) from an iron sole.

Make sure that all the parts of appliance don’t have damages.

Please note! When using the iron for the rst time, you may notice a slight emission of

smoke and hear some sounds made by the expanding plastics. This is quite normal and it

stops after a short time. We also recommend passing the iron over an ordinary cloth before

using it for the rst time.

Soft the laundry to be ironed according to the international symbols on the garment label,

or if this is missing, according to the type of fabric.

GARMENT FABRIC THERMOSTAT LABEL TYPE REGULATION

Table 1

Start ironing the garments requiring a low temperature.

This reduces the waiting times (the iron takes less time to heat up than to cool down) and

eliminates the risk of scorching the fabric.

STEAM IRONING

- Filling the reservoir

Please note! Do not use chemical additive, scented substances or decalciers. Use

distilled and/ demineralised water.

- Check that the plug is disconnected from the socket.

- Move the steam selector (3/Picture 1) to “0” (Picture 2.1).

- Open the lid (2/Picture 1)

- Raise the tip of the iron to help the water enter the opening without overowing.

- Slowly pour the water into the water tank Picture 2.2 using the special measure and

taking care not to go over the maximum level indicated by “MAX” on the reservoir

- Close the lid (2/Picture 1).

Signs on labels Type of fabric Thermostat positions

Synthetic ●

Low temperature

Silk - wool

●●

Medium temperature

Cotton - linen ●●●

High temperature

Fabric not to be ironed

EN

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Maestro MR312C Fier de călcat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Maestro. S-ar putea să ofere un manual original. Căutați manualul dvs. Maestro MR312C Fier de călcat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Maestro Fiare de călcat
Mai multe manuale pentru Fiare de călcat

Întrebări frecvente despre Maestro MR312C Fier de călcat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Maestro MR304C Fier de călcat

Manual

Maestro MR321C Fier de călcat

Manual

Maestro MR302C Fier de călcat

Manual

Maestro MR301C Fier de călcat

Manual

Maestro MR307 Fier de călcat

Manual

Maestro MR316 Fier de călcat

Manual

Maestro MR315C Fier de călcat

Manual

Maestro MR306С Fier de călcat

Categorii relevante