Manual Maestro MR315C Fier de călcat

Manual

4 5

replacing. Please note:

Use tap water only. Distilled and/demineralised water makes the «Zero-Calc” anti-calc

system ineffective by altering its physicochemical characteristics.

Do not use chemical additives, scented substances or decalciers. Failure to comply with

the above-mentioned regulations leads to the loss of guarantee.

Description of the appliance

Picture1 (Illustrations on page 2)

1 - spray nozzle

2 - ller door

3 - steam/dry and self-cleaning adjustment knob

4 - spray button

5 - shot steam button

6 - power cord

7 –handle

Safety instructions

When using your appliance, basic safety precautions should always be followed,

including the following:

SPECIAL INSTRUCTIONS

Warning!

NEVER immerse the iron, cable or plug in any liquid.

NEVER touch the appliance with wet or damp hands.

ALWAYS disconnect iron from electrical outlet when lling with water or emptying and when

not in use.

Otherwise, there is a risk to get an electric shock!

DO NOT let children or untrained persons use the appliance without supervision.

DO NOT leave the hot iron touching fabrics or very inammable surfaces.

DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from the mains

when the appliance is not being used.

DO NOT use the power cord or the appliance in order to pull the plug out of the socket.

DO NOT leave the appliance exposed to the weather (rain, sun, etc. ).

DO NOT leave the iron without supervision when it is connected to the power supply.

INSTRUCTIONS BEFORE USING

- Use iron only for its intended use.

- To protect against a risk of electric shock, do not immerse the iron in water or other

liquids.

- The iron should always be turned to ‘ Off ’ before plugging or unplugging from outlet.

Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.

- Do not allow cord to touch hot surfaces. Let iron cool completely before putting

away. Loop cord loosely around iron when storing.

- Do not operate iron with a damaged cord or if the iron has been dropped or

damaged. To avoid the risk of electric shock, do not disassemble the iron take it to a

qualied serviceman for examination and repair. Incorrect reassembly can cause a risk of

electric shock when the iron is used.

- Close supervision is necessary for any appliance being used by or near children. Do not

leave iron unattended while connected or on an ironing board.

- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when

you turn a steam iron upside down - there may be hot water in the reservoir.

- Do not use it for commercial purpose.

Please note! Do not use chemical additive, scented substances or decalciers. Failure to

comply with the above-mentioned regulations leads to the loss of guarantee.

Operation

BEFORE STARTUP

Before the rst use remove a protective lm (at presence) from an iron sole.

Make sure that all the parts of appliance don’t have damages.

Please note! When using the iron for the rst time, you may notice a slight emission of

smoke and hear some sounds made by the expanding plastics. This is quite normal and it

stops after a short time. We also recommend passing the iron over an ordinary cloth before

using it for the rst time.

Soft the laundry to be ironed according to the international symbols on the garment label,

or if this is missing, according to the type of fabric.

GARMENT FABRIC THERMOSTAT LABEL TYPE REGULATION

Table 1

Start ironing the garments requiring a low temperature.

This reduces the waiting times (the iron takes less time to heat up than to cool down) and

eliminates the risk of scorching the fabric.

Signs on labels Type of fabric Thermostat positions

Synthetic ●

Low temperature

Silk - wool

●●

Medium temperature

Cotton - linen ●●●

High temperature

Fabric not to be ironed

EN

8 - temperature control light

9 - thermostat adjustment knob

10 - water tank

11 - sole plate with holes for steam

12 - self- cleaning button

13 - maximum water level

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Maestro MR315C Fier de călcat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Maestro. S-ar putea să ofere un manual original. Căutați manualul dvs. Maestro MR315C Fier de călcat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Maestro Fiare de călcat
Mai multe manuale pentru Fiare de călcat

Întrebări frecvente despre Maestro MR315C Fier de călcat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Maestro MR316 Fier de călcat

Manual

Maestro MR310C Fier de călcat

Manual

Maestro MR301C Fier de călcat

Manual

Maestro MR308С Fier de călcat

Manual

Maestro MR305C Fier de călcat

Manual

Maestro MR303C Fier de călcat

Manual

Maestro MR317T Fier de călcat

Manual

Maestro MR300C Fier de călcat

Categorii relevante