Manual Russell Hobbs 23300 Supreme Steam Fier de călcat

Manual

4

Label marking Dot setting

l hot – cotton, linen

•••/max

i do not iron

-

If the instructions on the fabric label differ from this guide, follow the instructions on the label.

FILLING

You may use the iron with tap-water, but if you live in a hard water area, you should use distilled

water (not chemically descaled or softened water). If you buy distilled water, check that it’s

suitable for use in irons.

1. Open the water inlet cover.

2. Pour slowly, to let the air in the reservoir escape, otherwise you’ll cause an air lock and the

water will overflow.

3. Don’t fill past max, or water will escape during use.

4. Wipe up any spillage.

HEATING YOUR IRON

Your iron is heated by placing it onto the stand. The smart status light will show you when you

need to reheat your iron and when it is ready to use. The smart status light operates as follows:

Smart Status Light Remarks

Steady red Your iron is heating up

Flashing green Your iron is ready to use

Flashing red

Your iron needs reheating but you can carry on ironing for a little

longer

Flashing red, 3 beeps Your iron must be reheated as soon as possible

Slowly pulsing red Auto shut-off activated

Important Note:

Between ironing tasks always put the iron back onto the stand. This ensures the most efficient

heating and gives you the best performance from your iron.

1. Set the temperature control to the setting you require.

2. Put the iron onto the stand and plug the stand into the power socket (switch the socket on,

if it’s switchable). The smart status light will light up red and your iron will start to heat up.

3. When the smart status light flashes green your iron is ready to use.

STEAM IRONING

1. To steam iron, set the temperature control to l or higher.

2. Set the steam control to the setting you want, n = no steam, h= high steam.

3. When the smart status light flashes green your iron is ready to use.

SPRAY

Water spotting affects some fabrics. Test this out first on a hidden part of the fabric.

1. Lift the iron off the fabric.

2. Aim the spray nozzle at the fabric.

3. Press the sbutton – you may have to press it 2 or 3 times to pump water through the

system.

SHOT OF STEAM

1. Steam is available when the temperature control is at l or above.

2. Lift the iron off the fabric.

3. Press the hbutton.

4. Leave 4 seconds between shots, to let the temperature build up.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Russell Hobbs 23300 Supreme Steam Fier de călcat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Russell Hobbs. S-ar putea să ofere un manual original. Căutați manualul dvs. Russell Hobbs 23300 Supreme Steam Fier de călcat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Russell Hobbs Fiare de călcat
Mai multe manuale pentru Fiare de călcat

Întrebări frecvente despre Russell Hobbs 23300 Supreme Steam Fier de călcat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Russell Hobbs 26483-56 Fier de călcat

Manual

Russell Hobbs 27281 Fier de călcat

Manual

Russell Hobbs 25090 One Temperature Fier de călcat

Manual

Russell Hobbs 22523-56 AutoSteam Ultra Fier de călcat

Manual

Russell Hobbs 20630-56 Power Steam Ultra Fier de călcat

Manual

Russell Hobbs 21530-56 Extreme Gilde Fier de călcat

Manual

Russell Hobbs 21260-56 SmartFill Fier de călcat

Manual

Russell Hobbs 24800-56 Fier de călcat

Categorii relevante