Manual Ryobi RLS5A Mașină de spintecat

Manual

English

1

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

SAFETY INSTRUCTIONS

WARNING

Read and understand all instructions. Failure to

follow all instructions listed below may result in electric

shock, fi re and/or serious personal injury.

■ Keep work area clean. Cluttered areas and benches

invite accidents. Do not leave tools or pieces of wood

on the tool while it is in operation.

■ Make sure the work area has ample lighting to see

the work and that no obstructions will interfere with

safe operation before performing any work using

your tool.

■ Do not use in dangerous environments. Do not use

power tools in damp or wet locations or expose to rain.

Keep the work area well lit.

■ Keep the operator zone and adjacent area clear for

safe, secure footing.

■ Danger! Keep clear of moving parts.

■ Make sure the log splitter is on a level surface.

Block the splitter as required to prevent unintended

movement.

■ Make sure the log splitter and any accessories are

properly installed and securely fastened.

■ Use the proper extension cord. Make sure your

extension cord is in good condition. Use only a

cord heavy enough to carry the current your product

will draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

■ Electrical power should be supplied via a residual

current device (RCD) with a tripping current of not

more than 30 mA.

■ Keep all bystanders especially children and pets, at

least 15 m from the operating area.

■ Only one person is permitted to operate the log

splitter.

■ Before use, examine the power cord or extension

cable for damage. If there are signs of damage, it

must be replaced by a qualified service technician.

■ Before use, check that there are no damaged parts.

A defective switch or any part that is damaged

should be properly repaired or replaced by an

authorized service facility.

■ Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting and any other conditions

that may affect its operation. A guard or other part that

is damaged must be properly repaired or replaced by

an authorized service center to avoid risk of personal

injury.

■ Never leave tool running unattended. Turn the power

off. Do not leave tool until it comes to a complete stop.

■ Never use in an explosive atmosphere. Normal

sparking of the motor could ignite fumes.

■ Dress properly. Do not wear loose clothing,

neckties, or jewellery that can get caught and draw

you into moving parts. Rubber gloves and nonskid

footwear are recommended when working outdoors.

Also wear protective hair covering to contain long hair.

■ Always wear safety glasses with side shields.

Everyday eyeglasses have only impact-resistant

lenses, they are not safety glasses.

■ Do not operate a tool while under the influence of

drugs, alcohol, or any medication.

■ Disconnect tools. When not in use, before servicing,

or when changing attachments, blades, bits, cutters, all

tools should be disconnected from power source.

■ Maintain tools with care. Keep tools sharp and clean

for better and safer performance. Follow instructions for

lubricating and changing accessories.

■ Use recommended accessories. Consult the

operator’s manual for recommended accessories. The

use of improper accessories may result in injury.

■ Tool service must be performed only by qualified

repair personnel. Service or maintenance performed

by unqualified personnel could result in a risk of injury.

INTENDED USE

You may use this product for splitting logs and freeing

jammed logs.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing

of as waste. The machine, accessories and

packaging should be sorted for environmental-

friendly recycling.

SYMBOL

Wet conditions alert

Conformance to technical regulations

Please read the instructions carefully

before starting the machine.

Wear eye protection

Safety alert

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Ryobi RLS5A Mașină de spintecat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Ryobi. S-ar putea să ofere un manual original. Căutați manualul dvs. Ryobi RLS5A Mașină de spintecat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Ryobi Mașini de spintecat
Mai multe manuale pentru Mașini de spintecat

Întrebări frecvente despre Ryobi RLS5A Mașină de spintecat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Ryobi RLS4A Mașină de spintecat

Manual

Güde DHH 1100/13 TEZ Mașină de spintecat

Manual

Atika ASP 20 N-2 Mașină de spintecat

Manual

Güde Basic 14T/DTS Eco Mașină de spintecat

Manual

Atika ASP 14 TS-2 Mașină de spintecat

Manual

Güde Basic 10T/DTS Mașină de spintecat

Manual

Atika ASP 5 N Mașină de spintecat

Manual

AL-KO KHS 5200 Mașină de spintecat

Categorii relevante