Manual Samsung NK52FG455CS Hotă

Manual

speed from speed 1 to intensive.

With each speed, the respective LED lights up.

Speed 1 LED L1

Speed 2 LED L2

Speed 3 LED L3

Intensive speed LED L4 (flashing)

Intensive speed is timed. Standard timing is 5’, after which

the hood switches to speed 2.

To deactivate the function before the time expires, press

T2; the hood will switch to speed 1; press T1 to switch off

the hood.

T3 Lights ON/OFF

T4 Speed timer

T5 Operating status indicator.

Speed timer

The speed timer is enabled by pressing T4; after the set

time, the hood switches off.

Timing is subdivided as follows:

Speed 1 - 20 minutes (LED L1 flashing)

Speed 2 - 15 minutes (LED L2 flashing)

Speed 3 - 10 minutes (LED L3 flashing)

Intensive speed - 5 minutes (LED L4 flashing).

During timed operation, press T1 to switch off the hood;

press T2 or T4 to make the hood

go back to the set speed.

Grease filter warning

After 40 hours of operation, LED L5 lights up.

When this warning appears, it means that the installed

grease filter needs to be washed.

To reset the warning, press and hold key T1 for 3”.

Carbon filter warning

After 160 hours of operation, LED L5 flashes.

When this warning appears, it means that the installed car-

bon filter needs to be replaced.

To reset the warning, press and hold key T1 for 3”.

In the event that both warnings appear at the same time,

LED L5 will alternately indicate the alarms by remaining

on for 3” and then flashing 3 times.

This condition can be reset by performing the procedure

described above twice.

The first time resets the grease filter warning, the second

time resets the carbon filter warning.

In standard mode, the carbon filter warning is not active.

If the hood is used in the filter version, it is necessary to en-

able the carbon filter warning.

Carbon filter warning activation:

Switch the hood OFF and simultaneously press and hold

keys T1 and T4 for 3”.

The LEDs L1 and L2 will flash for 5”.

Carbon filter warning deactivation:

Switch the hood OFF and simultaneously press and hold

keys T1 and T4 for 3”.

The LED L1 will flash for 2”.

Temperature alarm

The hood is equipped with a temperature sensor that activ-

ates the motor at speed 3 if the temperature

in the control panel area is too high.

The alarm condition is indicated by the LEDs L1, L2 and L3

flashing in sequence.

This condition remains until the temperature drops below

the alarm threshold.

It is possible to exit this mode by pressing T1 or T2.

Every 30”, the sensor checks the temperature in the control

panel area.

MAINTENANCE WARNINGS

• Cleaning: For cleaning, simply use a cloth moistened

with neutral liquid detergents. Do not use cleaning tools or

instruments.

• Avoid the use of abrasive products. DO NOT USE ALCO-

HOL!

For product maintenance, see the images at the end

of the installation marked by this symbol.

● Anti-Grease Filter: The metallic anti-grease filter

must be cleaned once a month with non-aggressive deter-

gents, manually or in a dishwasher on a short wash at low

temperatures. To remove the anti-grease filter, pull the

spring release handle.

• The Anti-Grease Filter traps the grease particles pro-

duced during cooking. When cleaned in the dishwasher,

the metal grease filter may discolour, but its filtering char-

acteristics remain unchanged.

● Carbon filter (for filter version only): The cart-

ridge must be replaced at least every four months. It CAN-

NOT be washed or regenerated. As indicated in the draw-

ings section: remove the anti-grease filters, apply a carbon

filter on each side and attach it to the product. Put the anti-

grease filters back in place.

• The carbon filter retains any unpleasant odours produced

during cooking. • The saturation of the carbon filter can oc-

cur after somewhat prolonged use depending on the type

of cooking and how regularly the grease filter is cleaned.

• Perimeter suction panel (panel maintenance)

Disassembly:

a. firmly pull the panel (FRONT SIDE) downwards

b. release it from the rear hinges.

Cleaning: the suction panel must be cleaned manually us-

ing non-aggressive detergents.

Assembly: the panel must be hooked at the back and se-

cured at the front (with magnets).

Attention! Always check that the panel is securely fixed in

place.

9

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Samsung NK52FG455CS Hotă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Samsung. S-ar putea să ofere un manual original. Căutați manualul dvs. Samsung NK52FG455CS Hotă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Samsung Hote
Mai multe manuale pentru Hote

Întrebări frecvente despre Samsung NK52FG455CS Hotă

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Samsung HDC9B90TX Hotă

Manual

Samsung NK36M7070VB/UR Hotă

Manual

Samsung HDC6255BG Hotă

Manual

Samsung NK24C5703TS Hotă

Manual

Samsung NK52FG455CC Hotă

Manual

Samsung NK24M1030IB Hotă

Manual

Samsung NK36C5070US Hotă

Manual

Samsung NK36M5060SS Hotă

Categorii relevante