Manual Tefal FV9965E0 Freemove Fier de călcat

Manual

EN

DE

FR

NL

ES

PT

IT

DA

SV

NO

FI

EL

HU

CS

SK

SL

SR

HR

RO

BG

TR

UK

RU

PL

ET

LV

LT

6

PROBLEM

POSSIBLE CAUSES

SOLUTIONS

Brown streaks come

through the holes in

the soleplate and

stain the linen.

You are using chemical descaling

agents.

Do not add any descaling agents to the water in the

water tank.

You are not using the right type of

water.

Perform a self-cleaning operation and consult the

section “What water to use?”

Fabric fibres have accumulated in the

holes of the soleplate and are burning.

Perform the self-cleaning operation and clean the

soleplate with a damp sponge. Vacuum the holes of the

soleplate from time to time.

The soleplate is dirty

or brown and can

stain the linen.

You are ironing with an inappropriate setting

(temperature too high).

Clean the soleplate as indicated above.

Select the appropriate setting.

Your linen has not been rinsed sufficiently

or you are using starch.

Clean the soleplate as indicated above. Always spray

starch onto the reverse side of the fabric to be ironed.

Your iron is releasing

little or no

variable/TURBO steam.

The water tank is empty.

Fill the water tank.

The anti-scale valve is dirty.

Clean the anti-scale valve.

Your iron has a build-up of scale.

Clean the anti-scale valve and carry out a selfclean.

Your iron has been used dry for too long.

Carry out a self-clean.

Your iron needs recharging.

For optimum efficiency, place the iron on its base to

be recharged at each resting period.

You are not using the the variable steam

trigger.

Hold the variable steam trigger down while you iron

to obtain a constant flow of steam.

The variable steam has not been

activated.

Gently shake the iron in a horizontal position, while

holding down the steam trigger until the steam

output begins.

The soleplate is

scratched or damaged.

You have placed your iron flat on a

metallic rest-plate or ironed over a zip.

You have cleaned your soleplate with an

abrasive or metal pad.

Always set your iron on its base. Try to avoid ironing

over zips. Refer to the chapter “Clean the soleplate”.

Your soleplate is

releasing particles.

Scale is building up on the soleplate.

Carry out a self-clean operation.

Water is running out of

the water tank flap.

You have not closed the water tank flap

properly.

Check that the water tank flap is locked properly.

Water drips from the

holes in the soleplate.

You have stored the iron horizontally,

without emptying it and without setting

it to MIN.

See the section “Storing your iron”.

The red light on the

display panel flashes

when the iron is on the

base.

Connection problem between the iron

and the base.

Check that the iron is pushed back completely and

connected to the base.

The spray does not

spray.

There is not enough water in the water

tank.

Fill up the water tank.

The base moves on the

ironing board.

The base has not been properly

connected to the EasyFix system or the

EasyFix system is not properly fixed to

the ironing board.

Check that the base is properly connected to the

EasyFix system and that the EasyFix system is

securely screwed onto the board.

Your iron is cooling down.

You are not placing it on its base

regularly.

Place the iron on the base during each resting period

while you change your item of clothing.

If there is a problem

If you have any problem or queries, please contact our Helpline: 0845 602 1454 – UK / (01) 677 4003 – ROI or consult our

website – www.tefal.co.uk

•

Its exclusive active coating eliminates all impurities that can be generated under normal conditions of use.

• Ironing with an incorrect program can however leave traces that may require manual cleaning. In this case, it is

recommended that you use a soft damp cloth on the still warm soleplate so as not to damage the coating– fig.22.

Your steam iron is fitted with an Ultraglide soleplate (depending on model):

• Never use aggressive or abrasive products.

• When the soleplate is still warm, wipe with a damp cloth – fig.22.

Storing your iron

• Set the thermostat control to “MIN”. Disconnect the base and empty the tank – fig.23.

• Wait for the soleplate to cool – fig.24. Wind the cord around the iron and its base – fig.25.

• Carry the iron and the base with two hands – fig.26 and 27.

Environment protection first!

i Your appliance contains valuable materials which can be recovered or recycled.

‹ Leave it at a local civic waste collection point.

1800131204 FV99XX E0 Upgrade_110x154 16/01/14 13:38 Page6

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Tefal FV9965E0 Freemove Fier de călcat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Tefal. S-ar putea să ofere un manual original. Căutați manualul dvs. Tefal FV9965E0 Freemove Fier de călcat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Tefal Fiare de călcat
Mai multe manuale pentru Fiare de călcat

Întrebări frecvente despre Tefal FV9965E0 Freemove Fier de călcat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Tefal GV6340T0 Fier de călcat

Manual

Tefal FV6872M0 Fier de călcat

Manual

Tefal FV8062G0 Fier de călcat

Manual

Tefal FV5781E1 Fier de călcat

Manual

Tefal GV9710G0 Fier de călcat

Manual

Tefal FV5782E0 Fier de călcat

Manual

Tefal FV9849S0 Ultimate Pure Fier de călcat

Manual

Tefal SV9202S0 Fier de călcat

Categorii relevante