Manual Tefal GV7450.GZG Fier de călcat

Manual

20

T

o transport your steam generator using the handle of the iron :

- place the iron in position onthehousing plateonthesteamgenerator and foldthering over the

iron until it locks into position (you will hear a “click”) - fig.2.

-

Hold the iron by the handle to transport your steam generator - fig.1.

What water may be used ?

• Your iron has been designed to operate using untreated tap water.

• Heat concentrates the elements contained in water during evaporation. The types of water

listed below contain organic waste or mineral elements thatcan cause spitting, brown staining

or premature wear of the appliance: water from clothes dryers, scented or softened water,

water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or

rain water should not be used in your iron. Also do not use boiled, filtered or bottled water.

I

f your waterisvery hard (check

with your local water authority)

it is possible to mix untreated

t

ap waterwith store-bought

distilled ordemineralisedwater

in the following proportions:

50% untreated tapwater, 50%

distilled ordemineralisedwater.

Preparation

Filling the water tank

• Place the steam generator on a stable, horizontal and heat-resistant surface.

• Ensure that your steam generator is unplugged and that the soleplate and the iron rest have

cooled down.

• Open the water tank filler cover - fig.4.

• Pour in untreated tap water up to the max mark - fig.5.

• Close the water tank filler cover.

• Your iron is equipped with an extension cord system to prevent the cord from dragging over

the laundry and creasing it again when ironing.

• Take the steam cord out of its housing and unwind it completely.

• Remove the tie to release the cord outlet.

• Press the Eject button - fig.6 and the Easycord system extends automatically.

• When the cord outlet tips, the Easycord system extends automatically without you having to

press the Eject button.

Using the Easycord system

Operating the control panel

• Green light flashes: the boiler heats up. - fig.7.

• Green light on: the steam is ready - fig.7.

• Red light “water tank” on: the water tank is empty - fig.10.

• The orange “anti-calc” indicator flashes - fig.12: you need to rinse the scale collector.

Switch on the steam generator

• Completely unwind the power cord and the steam cord from its storage space.

• Lower the retaining hoop (depending on model) to unlock the safety catch - fig.3.

• Plug your steam generator into a mains socket with an earth pin”.

• Press on the on / off switch. The green light (located on the control panel) flashes and the

boiler heats up - fig.7.

When the green “steam ready” light stops flashing (after 2 minutes approximately), the

appliance is ready.

The first time the appliance is

used, there may be some

fumes and smell but this is

not harmful. They will not

affect use and will disappear

rapidly.

Steam ironing

• Placetheiron'stemperaturecontrolslideaccordingtothetypeoffabricto beironed(seetable below).

• The thermostat light comes on. Be careful ! The steam generator is ready when the thermostat

light goes out and when the green “steam ready” light stays on.

• Adjust the steam output control dial (located on the control panel).

• While ironing, the light on top of the iron and the steam ready light turn on and off, as the

temperature adjusts without interrupting ironing.

• To obtain steam, press on the steam control button under the iron handle and keep it pressed -

fig.8. The steam will stop when you release the button.

• When starting, and regularly while it is being used, your steam generator's electric pump injects

waterinto the boiler. It makes a noise but this is quite normal. You may also hear aclicking noise

which is the steam valve opening. Again this is normal.

• Always spray starch onto the reverse side of the fabric to be ironed.

Use

Do not place the iron on a

metal support.When

taking a break from

ironing, always place

the iron on the iron rest

plate of the unit. It is

equipped with non-slip

pads and has been

designed to withstand

high temperatures.

Always use the Easycord

system for enhanced

comfort of use.

Ironing Boards:

D

ue to the powerful steam

output, a mesh type ironing

board must be used to allow

a

ny excess steam to escape

and to avoid steam venting.

1800115593 TEFAL ExpressAnticalc:1800115593 5/02/09 11:36 Page 20

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Tefal GV7450.GZG Fier de călcat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Tefal. S-ar putea să ofere un manual original. Căutați manualul dvs. Tefal GV7450.GZG Fier de călcat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Tefal Fiare de călcat
Mai multe manuale pentru Fiare de călcat

Întrebări frecvente despre Tefal GV7450.GZG Fier de călcat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Tefal SV8026E0 Fier de călcat

Manual

Tefal FV5781G0 Fier de călcat

Manual

Tefal SV8154G0 Fier de călcat

Manual

Tefal FV5770E0 Fier de călcat

Manual

Tefal FV1941T0 Easy Steam Fier de călcat

Manual

Tefal GV9812G0 Fier de călcat

Manual

Tefal FV6872Z0 Smart Protect Plus Fier de călcat

Manual

Tefal SV8110E0 Fier de călcat

Categorii relevante