Manual Tefal GV7450.GZG Fier de călcat

Ai nevoie de un manual pentru Tefal GV7450.GZG Fier de călcat? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 4 întrebări frecvente, 1 comentariu și are 1 vot cu o evaluare medie a produsului de 100/100. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

22
Easy descaling of your steam generator:
To extend the life of your steam generatorand avoidscale onyour ironing, your steam generator
is equipped with a built-in scale collector. This valve, located in the tank,
a
utomatically removes the scale that forms inside.
Operation:
An orange “anti-scale” light located on the control panel starts blinking to tell you that the anti-
scale valve needs rinsing - fig.12.
Important: This operation must not be carried out unless the steam generator has
been unplugged for at least two hours and has cooled down completely.
To carry out this operation, the steam generator must be close to a sink as water may
come out of the tank when it is opened.
Oncethe steam generator has cooled down completely, remove the scale collectorcover- fig. 13.
Unscrew theanti-scale valve andremove it fromthe housing;it contains thescalethat has built
up in the tank - fig.14 and fig.15.
To clean the valve properly, just rinse it under running water to remove the scale it contains -
fig.16.
Put the valve back into its housing and screw it in completely to keep it watertight - fig.17.
Refit the scale collector cover - fig. 18.
The next time you use your iron, press the “restart” button on the control panel to turn
off the orange “anti-scale” light.
D
o not use any descaling
substances (vinegar,
industrial descaling
p
roducts, etc.) when rinsing
the anti-scale valve :
they could damage it.
B
efore emptying your steam
generator, it must always be
left to cool for 2 hours to
avoid any risks of scalding.
Storing the steam generator
Press the illuminated on/off switch and unplug the generator.
Place the iron on the housing plate on the steam generator.
Raise the retaining hoop over the iron until it locks into place (audible click) - fig.2.
Your iron is then safely retained on its base. Warning: do not touch the soleplate while still hot.
Slot the extension cord outlet in the notch (depending on model). Take the end of the cord support and
press to return the flexible part into the base.
Store the steam cord in its slide storage place - fig.19. Take it, fold it in two so as to make a loop. Put the
end of this loop in the slide storage place then push gently until you see the end on the other side of the
slide storage place - fig.20.
Leave the steam generator to cool for at least one hour before putting it away if it is to be stored in a
cupboard or confined space.
You can store the steam generator in complete safety.
PROBLEMS CAUSES SOLUTIONS
The steam generator does not switch on
or the iron indicator and ON/OFF
indicator do not switch on.
The appliance is not switched on.
Check that your appliance is correctly
plugged in and press the illuminated
on/off switch.
Water runs out of the holes in the
soleplate.
Water has condensed in the pipes because
youareusing steam forthefirsttime oryou
have not used it forsometime.
Press on the steam control button away
from your ironing board until the iron
produces steam.
The soleplate is not hot enough.
Decrease the steam output while ironing
atlowtemperature(steam output control
dial on the control panel). Wait for the
thermostat light to go out before
activating the steam control button.
Your thermostat is faulty: the iron is not
hot enough.
Contact an Approved Service Centre.
Water streaks appear on the linen.
Your ironing board cover is soaked with
water as it is not suited to the power of a
steam generator.
Check that your ironing board is suitable
(See page 20).
Problems with your steam generator?
1800115593 TEFAL ExpressAnticalc:1800115593 5/02/09 11:36 Page 22
Descărcaţi manualul în limba română (PDF, 3.01 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre Tefal GV7450.GZG Fier de călcat, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de Tefal GV7450.GZG Fier de călcat?
Da Nu
100%
0%
1 vot

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre Tefal GV7450.GZG Fier de călcat. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

11qqqqqq 18-09-2021
tatstst

răspuns | A fost util (0) (Tradus de Google)

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Tefal GV7450.GZG Fier de călcat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Tefal. S-ar putea să ofere un manual original. Căutați manualul dvs. Tefal GV7450.GZG Fier de călcat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă Tefal
Model GV7450.GZG
Categorie Fiare de călcat
Tip fișier PDF
Mărime fișier 3.01 MB

Toate manualele pentru Tefal Fiare de călcat
Mai multe manuale pentru Fiare de călcat

Întrebări frecvente despre Tefal GV7450.GZG Fier de călcat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Pot curăța fundul de fier cu un spălător? Verificat

Nu, acest lucru ar putea deteriora fundul. Folosiți o cârpă umedă sau un burete moale pentru a o curăța.

A fost util (426) Citeşte mai mult

Care sunt diferențele dintre un fier de călcat cu abur și un fier de călcat obișnuit? Verificat

Cel mai mare avantaj al fierului de călcat cu abur este că îndepărtează ridurile mai ușor datorită utilizării aburului. Dimpotrivă, un fier obișnuit este mult mai ușor și adesea mai ieftin.

A fost util (348) Citeşte mai mult

Talpa fierului meu este decolorată, mai pot călca cu el? Verificat

Acest lucru este posibil, dar există șansa ca acesta să se frece de hainele de culoare deschisă.

A fost util (289) Citeşte mai mult

Pot călca peste butoane? Verificat

Nu, acest lucru va deteriora talpa fierului și acest lucru va împiedica funcționarea corectă a fierului de călcat. Nu călcați niciodată peste butoane, fermoare sau alte obiecte dure.

A fost util (240) Citeşte mai mult
Manual Tefal GV7450.GZG Fier de călcat

Produse asemanatoare

Categorii relevante

×
Download