Manual Tryton TXV14LK2 Maşină de găurit-înşurubat

Manual

Drills (or other working bits) must be moved to the full depth of the The tool housing must be cleaned with use of a moistened cloth

chuck opening.

After cleaning let

n Drilling boreholes

the tool dry completely before it is used again.

To drill deep boreholes carry out your job gradually, drill to lower

depths and remove the drill from the borehole from time to time to

remove borings from the borehole.

Store and transport the tool in its transport box to protect it against

To drill large diameter boreholes it is recommended to start with

humidity, dust penetration and small objects; remember to protect its

drilling a low-diameter borehole and then expand it to the desired

ventilation openings. Small objects after getting into the casing can

diameter. It prevents the tool from overloads.

result in damage to the motor.

When the drilling bit is seized during working switch immediately

PROTECTION OF THE ENVIRONMENT:

tool off to prevent it from being damaged. Switch the rotations

The symbol nearby denotes that old equipment must

direction to the anticlockwise rotations and then remove the drilling

never be thrown away together with other waste (with the

bit from the borehole.

penalty of a fine). Hazardous components of electronic

Keep the drill aligned with the axis of the borehole. The drilling bit

equipment may adversely affect the natural environment and

must be positioned perpendicularly to the surface of the machined

human health.

material. When the perpendicularity fails to be maintained the

Each household may contribute to the recovery and reuse (recycling) of

drilling bit may be seized or broken or, under extreme circumstances,

old machinery and equipment. Both in Poland and Europe a system for

the operator may be injured.

recovery of used equipment either exists or is being created. The system

Rotation speed of the drill spindle is controlled by the force the power

obliges all organizations that sell such equipment to collect the used

switch is depressed with.

machinery and appliances. Moreover, general purpose collecting points

Driving screws

for such equipment are available.

It is recommended to drill the pilot borehole first. The pilot borehole must

be a little deeper and with a less diameter than the outer diameter of the

MANUFACTURER:

screw thread. When the screw is to be driven within the vicinity of the

PROFIX Ltd., 34 Marywilska Street, 03-228 Warsaw, POLAND.

material edge the pilot borehole prevents from undesired chipping of the

This appliance is in conformity with national and European standards as

material.

well as with general safety guidelines.

If the screw is driven with abnormal difficulty the screw must be

Any repairs are allowed to be carried out exclusively by qualified staff

retracted and the pilot borehole diameter should be enlarged.

with use of original spare parts.

Anyway, when problem to drive the screw in persists (e.g. in case of hard

PICTOGRAMS:

wood grades) try to use a lubricating agent (e.g. liquid soap). Press the

tool to the screw with sufficient force to avoid spontaneous rotation of

Explanation of the icons located on the nominal plate and the

the driving bit in the screw head. Use only those bits that accurately

information tags:

match the bit head. When the screw head is damaged further driving the

screw in or out may prove infeasible.

Remember to always disconnect the battery from the tool prior

to starting the cleaning operations and unplug the charger from the outlet.

The charger may be cleaned exclusively with use of a dry cloth. Use also a

clean cloth to clean regularly the ventilation openings of the tool to keep

them patent. From time to time disassemble the grip and remove dust

and other rubbish from the interior.

small

quantity of soap and then wiped dry. Do not use any detergents or

solvents as they can damage parts made from plastics.

1.

TRANSPORTATION:

2.

3.

NOTE:

4.

n

Co.

STORAGE AND MAINTENANCE:

The tool in principle does not require any special maintenance or service.

The tool must be stored in a place that is not accessible to children and

must be kept clean and protected from moisture and dust. The storage

conditions should prevent potential mechanical damage and impact of

the weather conditions.

CAUTION:

7

«Always wear appropriate eye protection»

«Use appropriate hearing protection»

«WARNING! Read this instruction before switching

on the power supply and starting» the work»

TROUBLESHOOTING GUIDE:

PROBLEM POSSIBLE CAUSE REMEDY

Irregularities of the motor

operation.

Worn carbon brushes of the motor.

Have the brushes replaced at a service workshop.

The tool (drill/screwdriver)

fails to operate.

No power voltage, damaged

motor or the power trigger.

Check the battery status, recharge or replace with a new one when necessary.

When the problem persists hand over the tool for repair at a service workshop.

Please refer to the warranty sheet for addresses of authorized workshops.

Battery low. Recharge the battery.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Tryton TXV14LK2 Maşină de găurit-înşurubat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Tryton. S-ar putea să ofere un manual original. Căutați manualul dvs. Tryton TXV14LK2 Maşină de găurit-înşurubat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Tryton Maşini de găurit-înşurubat
Mai multe manuale pentru Maşini de găurit-înşurubat

Întrebări frecvente despre Tryton TXV14LK2 Maşină de găurit-înşurubat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Tryton TUV14LB2 Maşină de găurit-înşurubat

Manual

Tryton TXV18LK2 Maşină de găurit-înşurubat

Manual

Tryton TUV18BK2 Maşină de găurit-înşurubat

Manual

Tryton TUV12BK2 Maşină de găurit-înşurubat

Manual

Tryton TUV14BK2 Maşină de găurit-înşurubat

Manual

Tryton TUV18LB2 Maşină de găurit-înşurubat

Manual

Skil 3018 CA Maşină de găurit-înşurubat

Manual

Skil 3070 HL Maşină de găurit-înşurubat

Categorii relevante