Manual Zelmer ZIR2620 GoldenGlide Fier de călcat

Manual

13

12

PL

PL

ENEN

MARKING MATERIAL, FOR EXAMPLE

Do not iron this material

• (1 dot) Synthetics, Nylon, Acrylics, Polyester, Rayon

• • (2 dots) Wool, Silk

• • • (3 dots) Cotton, Linen

Insert the main plug into the wall socket. The indicator light (10) will turn on.

When the indicator light goes out you may start ironing.

If you set the temperature control to lower setting after ironing at a high temperature. it is not recommended

to iron before the pilot light switches on again.

WATER TANK FILLING

Unplug the iron from the mains before lling the water tank.

The iron has been designed to use normal tap water. If the tap water in your area is hard or semi-hard,

mix tap water with distilled or demineralized water purchased in stores in the ratio 2:1 and 1:1 respectively

(distilled water / tap water).

You can inquire about the water hardness with your local water supplier.

Never use 100% distilled or demineralized water, rain water, softened water, scented water, water from

refrigerators and air conditioners, dryers or other types of home water preparation water.

Open the water inlet lid (4).

Slowly pour water through the water inlet.

Never ll beyond the level mark for maximum lling (6), in order to avoid spilling out of water.

Close the water inlet lid.

Important: The water tank should be emptied after each use.

SPRAYING

This can be used to remove stubborn wrinkles.

As long as there is enough water in the water tank, you may use the spray button at any temperature setting

during steam or dry ironing.

Press the spray button (1) several times to activate the pump while you are ironing.

Do not use the spray function with silk!

STEAM IRONING

Set the temperature control (7) to the desired position in accordance with the manufacturer’s label. The pilot

light (10) will turn on until the temperature is reached. Then the pilot light will turn off.

Set the variable steam regulator (3) to the desired position.

Temperature control (7) Recommended position of the steam

regulator (3)

MIN

CAUTION: Avoid coming in contact with ejected steam.

DRY IRONING

The steam iron can be used on the dry setting with or without water in the water tank.

Turn the steam regulator (3) to the minimum position.

Select the setting on the temperature control (7) best suited for the fabric to be ironed.

CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not rell it with

water until the steam iron cools down.

SHOT OF STEAM

The shot of steam feature provides additional steam for removing stubborn wrinkles.

Set the temperature control (7) to “MAX”.

Press the shot of steam button (2) to release the burst of steam.

NOTE: To prevent water leakage from the soleplate, do not keep the steam button pressed for more than

5 seconds.

VERTICAL IRONING

This can be used to remove creases from hanging clothes, curtains etc.

Hang article of clothing on a clothes hanger.

Set the temperature control (7) to “MAX”.

Operate the iron in a vertical position at a distance of 10 cm / 4 in, and press the shot of steam

button (2) repeatedly with pauses of at least 5 seconds.

NOTE: To prevent water leakage from the soleplate, do not keep the steam button pressed for more than

5 seconds.

ANTI-DRIP SYSTEM

With the anti-drip system, you can perfectly iron even the most delicate fabrics.

Always iron these fabrics at low temperatures. The plate may cool down to the point where no more steam

comes out, but rather drops of boiling water that can leave marks or stains. In these cases, the Anti-drip

system automatically activates to prevent vaporization, so that you can iron the most delicate fabrics without

risk of spoiling or staining them.

WHEN YOU FINISH IRONING

Set the temperature control (7) to the minimum position.

Remove the main plug from the wall socket.

Empty the water tank.

Stand the iron on heel rest.

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Zelmer ZIR2620 GoldenGlide Fier de călcat. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Zelmer. S-ar putea să ofere un manual original. Căutați manualul dvs. Zelmer ZIR2620 GoldenGlide Fier de călcat într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Zelmer Fiare de călcat
Mai multe manuale pentru Fiare de călcat

Întrebări frecvente despre Zelmer ZIR2620 GoldenGlide Fier de călcat

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Zelmer ZIR3200 Healthy Fier de călcat

Manual

Zelmer ZIR4800 Prime Steam Fier de călcat

Manual

Zelmer ZIS6450 Smartcare Fier de călcat

Manual

Zelmer ZIR08800 Sencillo Fier de călcat

Manual

Zelmer ZIR10600 Exelentis Fier de călcat

Manual

Zelmer ZIR3210 Fier de călcat

Manual

Zelmer ZIS8700 Healthy Fier de călcat

Manual

Zelmer IR1200 Front Jetix Fier de călcat

Categorii relevante