Manual EGO HT6510E Trimmer de gard viu

Ai nevoie de un manual pentru EGO HT6510E Trimmer de gard viu? Mai jos puteți vizualiza și descărca manualul PDF gratuit în limba română. Acest produs are în prezent 4 întrebări frecvente, 0 comentarii și are 0 voturi. Dacă acesta nu este manualul dorit, vă rugăm să ne contactați.

Produsul dvs. s-a defectat și manualul nu oferă nicio soluție? Mergeți la Repair Café pentru servicii de reparații gratuite.

Manual

Loading…

56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HT5110E / HT6510E 7
EN
NOTICE: The tool is to be used only for its prescribed
purpose. Any other use is deemed a misuse.
BLADE SHEATH (FIG. B)
Remove/install the blade sheath from/to the cutting device.
INSTALLING/REMOVING THE BATTERY PACK
Use only with battery packs and chargers listed
in fig.A2.
Charge before first use.
To Install (Fig. C1)
Align the battery ribs with the mounting slots in the
machine’s battery port and slide the battery pack until it
snaps into position.
To Remove (Fig. C2)
Depress the battery-release button and pull the battery
pack out.
WARNING: Always be aware for the location of your
feet, children, or pets when pressing the battery-release
button. Serious injury could result if the battery pack falls.
NEVER remove the battery pack at a high location.
HOLDING THE HEDGE TRIMMER (Fig. D1-D5)
The unit has both a front and rear handle. With the blade
directed away from you, hold the unit by both handles.
The rear handle can be set in five positions
(0°/±45°/±90°) by raising up the handle-release lever
(Fig. D1 to Fig.D5), giving you many choices for a
comfortable grip when performing cutting operations.
WARNING: Do not adjust the handle while the
machine is running. Stop the machine and remove the
battery first.
STARTING/STOPPING THE HEDGE TRIMMER
Before operating, remove the blade guard and hold the
trimmer with both hands, one hand on the rear handle
and the other on the front handle. Then check for stable
footing, upright standing and a proper cutting distance.
Make sure that the cutting blade is not touching the
ground or any other objects.
WARNING: Check the hedges and bushes for
foreign objects, such as wire fences and hidden
wiring, before operating the machine.
WARNING: Do not use on a ladder, rooftop, tree,
or other unstable support. Stable footing on a solid
surface enables better control of the hedge trimmer in
unexpected situations.
To Start
1. Install the battery pack.
2. Squeeze and hold the front trigger with one hand.
3. Depress the lock-off trigger with the palm of your
other hand and then squeeze the rear trigger. With
the rear trigger depressed, continue pressing the
front trigger for continued operation.
To Stop
Move the hedge trimmer away from the cutting area and
release either of the trigger to stop the hedge trimmer.
WARNING: Always remove the battery pack from
the hedge trimmer during work breaks and after finishing
work.
CHANGING SPEED MODE (FIG. E)
This machine features two speed modes. The speed mode
will change with every press of the speed mode button.
The speed indicator will display the active speed status:
one light for low speed, two lights for high speed. The low
speed mode provides better control of the machine and
longer operating time per charge.
NOTICE: The speed mode can be set before the machine
is turned on OR during operation. When the machine is
re-started after a break, the speed mode will return to the
previous speed.
USING THE HEDGE TRIMMER
DANGER: If the blade jams on any electrical cord
or line, DO NOT TOUCH THE BLADE! IT CAN BECOME
ELECTRICALLY LIVE AND VERY DANGEROUS. Continue
to hold the hedge trimmer by the insulated rear handle
or lay it down and away from you in a safe manner.
Disconnect the electrical service to the damaged line or
cord before attempting to free the blade from the line or
cord. Failure to heed this warning will result in serious
personal injury or possible death.
WARNING: Avoid trimming too much at one time or
through the heavy shrubbery. This can cause the blades to
bind and slow, reducing the cutting efficiency.
NOTICE: The trimmer shall be used to cut stems less
than 33 mm thick.
NOTICE: For new growth, a wide sweeping is suitable
for the stems fed directly into the cutting blade. For older
growth, a sawing movement is good for trimming the
thicker stems. A non-powered hand saw or pruning saw is
suggested for trimming the large stems first.
Descărcaţi manualul în limba română (PDF, 39.0 MB)
(Protejați mediul înconjurător și imprimați acest manual numai dacă este neapărată nevoie)

Loading…

Evaluare

Spuneți-ne ce părere aveți despre EGO HT6510E Trimmer de gard viu, lăsând o evaluare a produsului. Doriți să împărtășiți experiența dvs. cu acest produs sau să adresați o întrebare? Lăsați un comentariu în partea de jos a paginii.
Ești mulțumit de EGO HT6510E Trimmer de gard viu?
Da Nu
Fiți primul care evaluează acest produs
0 voturi

Alăturați-vă conversației despre acest produs

Aici puteți împărtăși ce părere aveți despre EGO HT6510E Trimmer de gard viu. Dacă aveți o întrebare, citiți mai întâi cu atenție manualul. Solicitarea unui manual se poate face folosind formularul nostru de contact.

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru EGO HT6510E Trimmer de gard viu. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați EGO. S-ar putea să ofere un manual original. Căutați manualul dvs. EGO HT6510E Trimmer de gard viu într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Marcă EGO
Model HT6510E
Categorie Trimmere de gard viu
Tip fișier PDF
Mărime fișier 39.0 MB

Toate manualele pentru EGO Trimmere de gard viu
Mai multe manuale pentru Trimmere de gard viu

Întrebări frecvente despre EGO HT6510E Trimmer de gard viu

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

De unde știu că gardianul meu este contondent? Verificat

Atunci când ramurile sunt trase în loc să fie tăiate, garda-gardă este ascuțită și trebuie ascuțită.

A fost util (348) Citeşte mai mult

Cum îmi ascuți lamele de tăiat gard viu? Verificat

Ascuțirea lamelor tăietorului gard viu este importantă pentru menținerea performanței și eficienței instrumentului. Pentru a ascuți lamele, veți avea nevoie de o pilă sau o piatră de ascuțit special concepută pentru tipul de lamă de pe tăietorul de gard viu.

A fost util (301) Citeşte mai mult

Cum îmi ung lamele tăietorului gard viu? Verificat

Lubrifierea lamelor tăietorului gard viu va ajuta la reducerea frecării și uzurii, prelungind durata de viață a sculei. Utilizați un ulei lubrifiant de înaltă calitate special conceput pentru tăietorii gard viu și aplicați o cantitate mică pe lame după fiecare utilizare.

A fost util (148) Citeşte mai mult

Cum pot preveni formarea ruginii pe lamele mele de tăiat gard viu? Verificat

Rugina poate cauza deteriorarea lamelor tăietorului gard viu, reducându-le performanța și durata de viață. Pentru a preveni rugina, curățați și uscați bine lamele după fiecare utilizare și depozitați-le într-un loc uscat și curat. De asemenea, puteți lua în considerare aplicarea unui strat de protecție, cum ar fi ulei sau un inhibitor de rugină, pe lame înainte de a le depozita.

A fost util (90) Citeşte mai mult
Manual EGO HT6510E Trimmer de gard viu

Produse asemanatoare

Categorii relevante

×
Download