Manual Hozelock 2597 Auto Reel Tambur pentru furtun de grădina

Manual

5

GB

Contents

A

Auto Reel

B

Wall Bracket

C

Feeder Hose

D

Threaded Tap Connector

E

Hose End Connector

F

Waterstop Connector

G

Wall Plugs and Screws

H

Hose Nozzle

Quick hints and tips

• When mounting the reel, ensure that nothing

obstructs the reel from swinging freely through 180°.

• It is critical to use a 7mm drill when drilling holes to

mount the reel.

• Ensure the wall bracket is mounted vertically using a

spirit level.

• Check that the reel is locked onto the bracket before

turning on water supply.

• The hose will not rewind unless it is pulled a short

distance (15 to 30cm) away from the reel and then

walked back towards the reel.

• If the hose will not rewind, try the following;

Turn off the tap and let the water out of the hose by

opening the hose nozzle/gun.

Walk back to the reel with the end of the hose and

trigger the rewind mechanism by taking hold of the

hose near to the reel, and gently pull the hose about

15 to 30cm to release the latch.

(Ensure that nothing is obstructing the hose whilst

the rewind procedure is active.)

• Use the lock on the side of the reel to lock the hose

when not in use.

Assembly and installation

of the Auto Reel

TOOLS NEEDED:

• Flat-ended, long shaft screwdriver

• Philips, long shaft screwdriver

• Pencil

• Tape measure

• 7mm diameter masonry drill bit

• Electric drill/hammer drill

• Spirit level

SELECT A SUITABLE POSITION

FOR INSTALLATION

Fig 1.

• The reel is designed for external use and is not

suitable for use with indoor taps, unless used with

an appropriate Indoor Tap Connector

(Part No’s; 2159, 2176, 2177, 2274, which are not

supplied)

• The reel should be able to swing through 180°.

Allow 65cm of clearance on both sides of the wall

bracket. (See Fig.1)

• If the hose is to be used around corners, the wall

bracket should be mounted at least 1.60m from the

corner, and a hose guide should be used

(part no; 2392, which is not supplied.)

MOUNT THE WALL BRACKET

Fig 2.

• Remove the Wall bracket (Contents B) from the reel

by releasing the locking clasp on the reel (Fig.2a).

The wall bracket can now be removed ready for

mounting.

• Important: Ensure that the wall bracket is vertical

(with the padlock loop (see fig 6. a) pointing down)

using a spirit level, and that the correct size holes

(7mm diameter and 50mm deep) are drilled

(Fig.2b).

• Use the four wall plugs and screws supplied

(Contents G). The plugs and screws supplied are

designed for use on standard brick and concrete

walls. To fix the bracket to any other surface, you

should use screws and plugs appropriate for that

surface.

CONNECT THE FEEDER HOSE

AND FITTINGS

If the feeder hose supplied is too short to reach your

tap, replace it with a good quality 12.5mm (½”) hose.

Fig 3 – Attaching the Feeder Hose:

• Lay the reel on a soft surface with side

A

uppermost

and remove the side disc using a flat headed

screwdriver (Fig.3a).

• Unscrew the hose nut from the inlet adapter (Fig.3b).

• Push the feeder hose underneath the hose bridge,

put the nut over the hose (Fig.3c).

• Push the end of the hose into the inlet teeth and

tighten the nut (Fig.3d). Ensure that the hose is

pushed all the way into the inlet. Re-fit the side disc

(Fig.3e).

Attach the hose end connector (Contents E) to the

free end of the feeder hose. Attach the water stop

connector (Contents F - Pre fitted for the Flowmax

model) to the watering hose and connect the nozzle/

gun supplied to the water stop connector (Contents

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Hozelock 2597 Auto Reel Tambur pentru furtun de grădina. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Hozelock. S-ar putea să ofere un manual original. Căutați manualul dvs. Hozelock 2597 Auto Reel Tambur pentru furtun de grădina într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Hozelock Tambure pentru furtun de grădină
Mai multe manuale pentru Tambure pentru furtun de grădină

Întrebări frecvente despre Hozelock 2597 Auto Reel Tambur pentru furtun de grădina

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Hozelock 2590 Auto Reel Tambur pentru furtun de grădina

Manual

Hozelock 2477 2n1 Tambur pentru furtun de grădina

Manual

Hozelock 2415 2n1 Compact Reel Tambur pentru furtun de grădina

Manual

Hozelock 2595 Auto Reel Tambur pentru furtun de grădina

Manual

Hozelock 2475 2n1 Tambur pentru furtun de grădina

Manual

Hozelock 2398 Tambur pentru furtun de grădina

Manual

Hozelock 2416 Compact Cart Tambur pentru furtun de grădina

Manual

Hozelock 2490 Auto Reel Tambur pentru furtun de grădina

Categorii relevante