Manual Tryton TMT810B Şlefuitor cu bandă

Manual

electricians. One must implement additional safety measures to protect the operators

from exposure to vibrations, such as maintenance of the electric tool and

work tools, assurance of proper hand temperature, or determination of

the sequence of work operations.

- throwing a machined part or pieces of a machined part;

- damage of hearing when appropriate hearing protectors are not used;

- emission dust hazardous for human health when works are carried

out in closed rooms (confined areas).

n

TMT810B)

Fig. A

TMT810B)

n

Fig. B

n TMT810B)

Fig. C

The vibration level value given refers to basic application of the tool. If the

tool is used for other applications or with other tools, or if it is not

maintained properly, the vibration level may differ from the values

given. The above-mentioned causes may lead to higher exposure to

vibrations during the whole work time.

Despite using the tool according to its intended application it is

impossible to eliminate certain residual risk factors. Considering the tool

construction the following risks may occur when operating the tool:

PREPARING FOR USE:

1. Make sure that the power supply parameters are compatible with the

parameters of the belt sander given on its data plate.

2 Make sure the power switch (3) is in the OFF position.

3. When working with an extension cord, make sure that its parameters

and wire cross-sections are compatible with the parameters of the

Belt sander

sander. Use of as short as possible extension cords is recommended.

An extension cord should be completely unrolled.

Assembly of dust bag (see: fig. A, page 2)

NOTE: Due to health considerations, the dust bag must be always used

when the tool is in operation.

1. Put the dust bag (6) onto the dust outlet nozzle (7).

2. Pull it firmly over the nozzle, as deep as possible, to prevent it from

falling off during operation.

Removal of the dust bag is carried in a reverse sequence. In order to

achieve the best results, the dust bag must be emptied when its half-

Auxiliary handle

filled.

Speed adjustment knob (only to the model

Power switch

OPERATION:

Power switch lock

Powering ON/OFF

Handle

NOTE: The sander must be powered ON and OFF only when the abrasive

belt (10) does not touch the processed material.

1. To power the sander ON, press the switch (3) and hold it pressed.

External sockets for graphite brushes

2. To lock the switch in the ON position, press the switch lock (4).

Belt position adjustment knob

3. To power the sander OFF, release the switch (3), or when it is locked

Abrasive belt

with the switch lock (4), press the switch briefly and then release it.

Belt tensioning lever

Power cord

Adjustment of belt speed (only to the model

Guiding rollers

The speed adjustment knob (2) allows for setting the required belt

speed. This can also be done when the sander is in operation. The

TECHNICAL DETAILS:

required belt speed depends on the processed material and operating

conditions. It can be determined by a practical trial.

Operation at the maximal speed of the motor is recommended. This

allows for optimal cooling of the motor resulting in extending its

lifespan.

n Sanding

Secure the processed item on a stable base or with the use of a vice.

Power the sander ON and wait for it to achieve full speed. Gently put the

sander in contact with the surface of the processed item.

During operation, the sander must be held with both hands and led in

parallel to the processed surface. Pressure exerted onto the surface

cannot cause any reduction in the speed of the belt. Too high pressure will

cause increased wear of the abrasive belt, overload of the machine and

irreversible damage to the windings of the motor.

Effectiveness of removal of the material during sanding and the quality

of processing of the surface depends mainly on the type of the selected

abrasive belt and on the selected belt speed. The higher belt speed, the

higher amount of removed material and the more precise processing of

the surface.

Wood must always be ground in the direction of its growth rings -

sanding across the growth rings can bring undesirable results.

PACKING:

ź - 1 pc.

ź Dust bag - 1 pc.

ź Abrasive belt - 1 pc.

ź Graphite brushes - 2 pcs.

ź Operating manual - 1 pc.

ź Warranty card - 1 pc.

ź Transport case - 1 pc. (only to the model

ELEMENTS OF THE DEVICE:

Numbering scheme of elements of the device relates to the figures on pages

2-3 of the operating manual:

1.

2.

3.

4.

5.

6. Dust bag

7. Dust outlet nozzle

8.

9.

10.

11.

12.

13.

6

Rated voltage

230 V

Rated frequency

50 Hz

Rated power

810 W

Belt speed m/min) (

200-380

Abrasive belt size

533x76 mm

Weight

3,2 kg

Sound pressure level (LpA)

90,6 dB(A)

Sound power level (LwA)

104,4 dB(A)

Vibration level acc. to

2

measurement tolerance K=1,5 m/s )

EN 60745 -1:2009

(

Equipment class II

2

4,674 m/s

MODEL

TMT810BTMT810A

380

Power cord length

3 m

Evaluare

Mai multe despre acest manual

Înțelegem că este plăcut să aveți un manual pe hârtie pentru Tryton TMT810B Şlefuitor cu bandă. Puteți oricând descărca manualul de pe site-ul nostru web și îl puteți imprima singur. Dacă doriți să aveți un manual original, vă recomandăm să contactați Tryton. S-ar putea să ofere un manual original. Căutați manualul dvs. Tryton TMT810B Şlefuitor cu bandă într-o altă limbă? Alegeți limba preferată pe pagina noastră de pornire și căutați numărul de model pentru a vedea dacă îl avem disponibil.

Specificații

Toate manualele pentru Tryton Şlefuitoare cu bandă
Mai multe manuale pentru Şlefuitoare cu bandă

Întrebări frecvente despre Tryton TMT810B Şlefuitor cu bandă

Echipa noastră de asistență caută informații utile despre produs și răspunde la întrebările frecvente. Dacă descoperiți o inexactitate în întrebările frecvente, vă rugăm să ne anunțați utilizând formularul de contact.

Produse asemanatoare

Manual

Tryton TMT810A Şlefuitor cu bandă

Manual

Ryobi EBS800 Şlefuitor cu bandă

Manual

Far Tools BS 810C Şlefuitor cu bandă

Manual

FERM BSM1021 Şlefuitor cu bandă

Manual

Parkside IAN 315834 Şlefuitor cu bandă

Manual

Parkside IAN 89170 Şlefuitor cu bandă

Manual

Parkside IAN 437475 Şlefuitor cu bandă

Manual

Ryobi EBS-9576V Şlefuitor cu bandă

Categorii relevante